2003 Nissan Frontier Owner's Manual - Page 127

The front crossbar can be adjusted or removed. Use the Torxdriver provided in the tool kit to loosen both crossbar adjusting screws. To adjust: 1. Loosen the adjusting screws with the Torxdriver 1 by turning counterclockwise A. 2. When the clamp is loosened, move the crossbar so the cargo can be positioned on the crossbar B . 3. Tighten the crossbar adjusting screws with the Torxdriver by turning clockwise. 4. Secure the cargo with rope. 5. Always check the tightness of the crossbar adjusting screws. To remove: 1. Loosen the adjusting screws with the Torxdriver 1 by turning counterclockwise A. 2. Rotate the clamps C . 3. Remove the crossbar. 4. Reverse to install. 5. Always check the tightness of the crossbar adjusting screws. WIC0857 ROOF RACK (if so equipped) Always evenly distribute the cargo on the tubular roof rack. The maximum total load is 125 lb (56 kg) evenly distributed. Be careful that your vehicle does not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Ratings (GAWR front and rear). The GVWR and GAWR are located on the F.M.V.S.S. label (located on the driver's side door jamb pillar). For more information regarding GVWR and GAWR, refer to "Vehicle loading information" in the "Technical and consumer information" section later in this manual. Instruments and controls 2-43