2003 Nissan Sentra Owner's Manual - Page 102

NOTE: After clock adjustment, the radio is in the clock priority mode. SEEK/SCAN button SEEK tuning Push the SEEK/SCAN tuning button for less than 1.5 seconds. SEEK tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed, and stops at the next broadcasting station. Once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcasting station. SCAN tuning Push the SEEK/SCAN tuning button for more than 1.5 seconds. SCAN illuminates in the display. SCAN tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed. SCAN tuning stops at each broadcasting station for 5 seconds. Pushing the button again during this 5 second period stops SCAN tuning and the radio remains tuned to that station. LHA0034 FM-AM radio operation FM/AM band select Push the button to change from AM to FM reception. The FM stereo indicator, ST, illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE buttons WARNING The radio should not be tuned while driving so full attention may be given to vehicle operation. Use the and buttons for manual tuning. To move quickly through the channels, hold either of the tune buttons down for more than 0.5 seconds. Station memory operations 6 stations can be set for the AM band. Twelve stations can be set for the FM band (6 for FM1, 6 for FM2). 4-14 Heater, air conditioner and audio systems