2007 Nissan Titan Owner's Manual - Page 337

TRUCK-CAMPER LOADING INFORMATION CREW CAB MODELS Crew Cab models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway Traffic Safety Administration regulations. It is recommended that, before installing the camper, you carefully read the following information and ensure that the camper meets the specifications. This information may not apply to some Canada model vehicles. LTI0128 LTI0129 SPECIAL BODY VEHICLES Some vehicles are equipped with commercial or camper bodies. However, this Owner's Manual does not cover these options. For further information, please refer to the body manufacturer's instruction manual. LOCATION FOR CENTER OF GRAVITY The illustration indicates the recommended cargo center of gravity location. King Cab: L1 = 1115.7 mm (43.9 in) When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer's weight figure, plus: ● the weight of installed additional camper equipment not included in the camper manufacturer's weight figure, ● the weight of camper cargo, ● and the weight of occupants in the camper. The total cargo load should not exceed the truck's pay load weight rating and the camper's center of gravity should fall within the truck's recommended center of gravity location when installed. WARNING Improper loading may be dangerous. If a load is too far back, it can affect handling characteristics. If a load is too far forward, the front axle may be overloaded. Technical and consumer information 9-23