2009 Nissan Rogue Owner's Manual - Page 37
2009 Nissan Rogue Manual
Page 37 highlights
bracket that provides the straightest installation. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. harnesses. . Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. CHILD RESTRAINT INSTALLATION USING LATCH Front-facing Follow these steps to install a front-facing child restraint using LATCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. SSS0645 Front-facing (webbing-mounted) - step 2 WARNING . Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Lower Anchors and Tethers for CHildren SYSTEM (LATCH)" earlier in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or 2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors. 3. The back of the child restraint should be secured against the vehicle seatback. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. . 1-24 Safety - Seats, seat belts and supplemental restraint system