2010 Nissan Armada Owner's Manual - Page 66

1. If necessary, raise or remove the head restraint to position the top tether strap 1 over the top of the seatback. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See "Head restraint adjustment" in this section for head restraint adjustment, removal and installation information. 2. Secure the tether strap to the tether anchor point 2 on the floor behind the child restraint. LRS0361 2nd row bench seat (if so equipped) 3. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap on the rear seat, consult your NISSAN dealer for details. LRS0640 3rd row bench seat INSTALLING TOP TETHER STRAP (2nd row captain's chairs or 2nd row bench seat [if so equipped] ) First, secure the child restraint with the LATCH lower anchors (2nd row captain's or bench outboard seating positions only) or the seat belt, as applicable. INSTALLING TOP TETHER STRAP (3rd row bench seat) WARNING In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position. The center position of the 3rd row bench seat is the seating position that can use a top tether strap. Safety-Seats, seat belts and supplemental restraint system 1-49