2011 Nissan Sentra Owner's Manual - Page 85

Distance to empty (dte-mile or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption. The display is updated every 30 seconds. NOTE: When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display. Average speed (mph or km/h) The average speed mode shows the average vehicle speed since last reset. Resetting is done by pressing the trip or change button for more than approximately 1 second. The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows (----). Journey time The journey time mode shows the time since the last reset. The displayed time can be reset by pressing the change button for more than approximately 1 second. Instant fuel economy The instant fuel economy mode shows the instant fuel consumption. The display updates instantly when driving. Trip computer reset Pushing the change button for more than 3 seconds will reset all modes except Trip A and distance to empty (dte). Average fuel consumption (Mpg or l/100km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the change button for more than approximately 1 second. The display is updated every 30 seconds. At about the first 1/3 miles (500 m) after a reset, the display shows (----). OUTSIDE TEMPERATURE DISPLAY (if so equipped) The outside temperature function provides a display of the outside temperature when the ignition switch is placed in the ON position. The display of positive temperatures is unsigned (blank), negative temperatures are prefixed with a minus sign. 2-8 Instruments and controls