2014 Nissan Maxima Quick Reference Guide - Page 9

AUTOMATIC DRIVE POSITIONER (if so equipped) T  wo positions for the driver's seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to set the memory positions: •  Confirm the shift lever is in the P (PARK) position. •  Push the ignition switch to the ON position. Adjust the driver's seat, steering column and outside mirrors to the desired positions •  using the adjusting switches for each feature. • Push the SET switch within 5 seconds and push the memory switch (1 or 2) for at least 1 second. •  The indicator light on the memory switch you select will illuminate for approximately 5 seconds. •  The driver's seat, steering column and outside mirror positions are now set to your preferences. These memorized positions can also be linked to your NISSAN Intelligent Key®. For more information, refer to the "Pre-driving checks and adjustments (section 3)" of your Owner's Manual. OUTSIDE MIRROR CONTROL SWITCH  The outside mirror control switch is located on the left side of the instrument panel. To select the left or right mirror, move the switch 01 .  Adjust each mirror to the desired position using the switch 02 .  To prevent accidentally moving the mirror, move this switch 01 to the center (neutral) position. REVERSE TILT-DOWN FEATURE (if so equipped)  If the small switch is in the center (neutral) position, neither mirror will turn downward when the shift lever is moved to R (REVERSE).  When the small switch 01 is in either the left or right position, the reverse tilt-down feature will turn both outside mirror surfaces downward to provide better rear visibility close to the vehicle. To turn both mirrors downward, move the shift lever to R (REVERSE).  The mirror surfaces will return to their original position when any of the following have occurred The shift lever is moved to any position other than R (REVERSE). • The outside mirror control switch is set to the center (neutral) position. • The ignition switch is placed in the OFF position. 02 01 For more information, refer to the "Pre-driving checks and adjustments (section 3)" of your Owner's Manual. To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi. 7