2014 Nissan Pathfinder Dismantling Guide - Page 37

4-1 Jump Starting Procedures Vehicle being jump started A B + D B E C + Cloth F Vehicle with battery for booster AAYIA0072GB NOTE: Jumper cable connections under the hood of the Pathfinder HYBRID are not connected directly to a battery. They are connected to chassis ground and a fuse box terminal. Refer to the following instructions and the above illustration. 1. Locate the fuse box behind the engine air cleaner. 2. Push the tab in and lift up A to remove the fuse box cover and expose the remote positive battery terminal B . 3. If the booster battery is in another vehicle, position the two vehicles to bring their batteries near each other. ○ ○ DO NOT allow the two vehicles to touch. 4. Apply the parking brake. Move the selector lever the P (Park). Switch off all unnecessary electrical systems (lights, heater, air conditioner, etc.). 5. Remove vent caps on the battery (if so equipped) of the vehicle with battery for booster. Cover the battery with an old cloth F to reduce explosion hazard. 6. Connect jumper cables in the sequence as illustrated ( B → C → D → E ). ○ • Always connect positive (+) to positive (+) and negative (-) to body ground (for example, as illustrated), not to the 12V battery. • Make sure the jumper cables do not touch moving parts in the engine compartment and that the cable clamps do not contact any other metal. DG-37