2014 Nissan Quest Quick Reference Guide - Page 5

P  redictive course lines 02 indicate the predictive course when operating the vehicle. The lines will be displayed when the steering wheel is turned. T  he course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position. T  here are some areas where the system will not show objects. •  When in the front or the rear view display, an object below the bumper or on the ground may not be viewed 03 When in the bird's-eye view, a tall object near the seam of the camera viewing areas 04 will not appear in the monitor. T  he distance between objects viewed on the Around View® Monitor differs from the actual distance. O  bjects in the bird's-eye view will appear further than the actual distance. For more information, refer to the "Monitor, heater, air conditioner, audio, phone and voice recognition systems (section 4)" of your Owner's Manual. 02 03 04 Blind Spot Warning (BSW) System (if so equipped) The control switch 01 is located on the left side of the instrument panel. The system automatically turns on when the engine is started and the BSW ON indicator light on the switch illuminates. The indicator light 02 , located in the outside mirror, will activate when the BSW system detects a vehicle in the detection zone. If a turn signal is activated in the direction of a detected vehicle, a chime sounds twice and the BSW indicator light will flash. To cancel the system, push the control switch and the BSW ON indicator light will turn off. For more information, refer to the "Starting and driving (section 5)" of your Owner's Manual. 01 02 To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi 3