2015 Nissan Pathfinder Quick Reference Guide - Page 4

NEW SYSTEM FEATURES AROUND VIEW® MONITOR SYSTEM WITH CAMERA AIDED SONAR (parking sensor) (if so equipped)  With the ignition switch in the ON position, the Around View® Monitor is activated by pressing the CAMERA button 1 , located on the control panel, or by moving the shift lever to the R (REVERSE) position. The control panel displays various views of the position of the vehicle.  When the shift lever is in the P (PARK), N (NEUTRAL) or D (DRIVE) position and the CAMERA button 1 is pressed, the front view and bird's-eye view screen is displayed. When the CAMERA button 1 is pressed again, the front view and front-side view screen is displayed.  When the shift lever is in the R (REVERSE) position, the rear view and bird's-eye view screen will be displayed. When the CAMERA button 1 is pressed, the rear view and front-side view screen will be displayed.  The colored guide lines on the display screen indicate vehicle width and approximate distances to objects with reference to the vehicle body line. • Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m) REAR VIEW & FRONT-SIDE VIEW 1 FRONT VIEW & BIRD'S-EYE VIEW FRONT VIEW & FRONT-SIDE VIEW REAR VIEW & BIRD'S-EYE VIEW  There are some areas where the system will not show objects. • When in the front or the rear view display, an object below the bumper or on the ground may not be viewed 2 . • When in the bird's-eye view, a tall object near the seam of the camera viewing areas 3 will not appear in the monitor. 1  The distance between objects viewed on the Around View® Monitor System differs from the actual distance.  Objects in the bird's-eye view will appear further than the actual distance. 2 2 3 2 To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.