1996 Oldsmobile Bravada Owner's Manual - Page 245
1996 Oldsmobile Bravada Manual
Page 245 highlights
,- Taillamps 1. Open the endgate. 6. Push the new bulb straight into the socket until it clicks. 2. Remove the'two screws from thelamp.assembly. the lamp assembly and &m the 7. Put the socket into socket clockwise until it locks in place. 8. Install the lamp assembly and screws. 9. Close the endgate. Underhood Lamp 1. Disconnect the electrical connector from the underhood lampassembly. 2. Remove the screws. 3. Disconnect the ground wire. I 4. Remove the lamp assemblyfrom the hood. 5. Install the new bulb. 6.- Replace the ass.embly. Install and tightenthe screws. 7. Connect the ground wire. 3. 'Pull the assembly away from the vehicle. 4. Turn the socket counterclockwise to remove it. Push the tab in while you turn the s,cjcketcounterclockwise. 5. Holding the base of the bulb, pull the bulb straight out of the socket. 8,. Connect the electrical connector to the lamp assembly. ' 6-33
![](/manual_guide/autos/1996-oldsmobile-bravada-owners-manual-78ee4c3/245.png)