1999 Oldsmobile Alero Owner's Manual - Page 94
1999 Oldsmobile Alero Manual
Page 94 highlights
yellowblue As you signal a turn or a lane change, if the arrows flash rapidly, a signal bulb may be burned out and other drivers won't see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and then check the fuse (see "Fuses and Circuit Breakers" in the Index). To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. Windshield Wipers Headlamp High/Low Beam Changer To change the headlamps from low beam to high beam, pull on the turn signal/multifunction lever all of the way toward you. Then release it. When the high beams are on, a light on the instrument panel also will be on. Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. You control the windshield wipers by moving the stalk with the wiper symbol on it up or down. For a single wiper cycle, push the stalk down to MIST, then release it. For more cycles, hold the stalk down longer. 2-34