1999 Oldsmobile Silhouette Owner's Manual - Page 339
1999 Oldsmobile Silhouette Manual
Page 339 highlights
yellowblue Taillamps 1. Open the liftgate. 2. Remove the two screws from the taillamp housing on the inboard side. 3. Pull off the entire taillamp housing. The locator/retaining pins on the outboard side are part of the lamp assembly and will remain intact during removal. A. Taillamp Bulb B. Back-Up Lamp Bulb C. Turn Signal Lamp Bulb D. Stop/Taillamp Bulb 6. Snap the bulb holder back into place, making sure all retaining tabs are properly over the bulb holder tabs. 7. Reinstall the taillamp assembly by inserting the outboard locating/retaining pins until the lamp is seated. Secure with the inboard screws. 4. Remove the bulb holder by pressing the four retaining tabs and pulling the holder away from the assembly. 5. Replace the bulb(s) by pulling the old one(s) out and gently pushing the new one(s) into the bulb holder socket. For any bulb changing procedure not listed in this section, contact your dealer's service department. 6-37
![](/manual_guide/autos/1999-oldsmobile-silhouette-owners-manual-b42cfcc/339.png)