2003 Polaris Classic Cruiser Owners Manual - Page 60
2003 Polaris Classic Cruiser Manual
Page 60 highlights
INSTRUMENTS, FEATURES AND CONTROLS Right Handlebar Controls Engine Stop/Run Switch The engine stop/run switch completes or interrupts the ignition, starter, and fuel pump circuits. To complete the circuits, allowing the engine to start and run, press the lower portion of the engine stop/run switch (RUN position). To interrupt the circuits, press the upper portion of the switch (STOP position). The engine should not start or run when the switch is in the STOP position. Use the engine stop/run switch to turn the engine off under either normal or emergency conditions.00000000 1 2 4 5 3 Emergency Flasher Switch The emergency flasher switch activates and cancels the emergency flashers. When the emergency flashers are active, all of the turn signals flash. To activate the emergency flashers, slide the switch to the left (to the triangle). To cancel the flashers, slide the switch to the right (to the dot). 1. 2. 3. 4. 5. Engine Stop/Run Switch Emergency Flasher Switch Starter Button Throttle Control Grip Multi-Function Display MODE Button Starter Button The starter button works only when the engine stop/run switch is in the RUN position and the transmission is in neutral or the clutch is disengaged. To engage the engine starter motor, press the right side of the starter button. 58 For complete engine starting procedures, see "Starting the Engine" on page 82.