2007 Polaris Trail RMK Owners Manual - Page 64

2007 Polaris Trail RMK Manual

Get 2007 Polaris Trail RMK PDF manuals and user guides View all 2007 Polaris Trail RMK manuals

Page 64 highlights

Electronic Reverse (PERCt) OPERATION Electronic reverse will activate only if the engine is below 4000 RPM. If your machine is running at an altitude of over 6000 feet, adjust the ignition setting as described on page 62. WARNING Improper reverse operation, even at low speeds, may cause loss of control, resulting in serious injury or death. Damage will occur to the chaincase or transmission if shifting is attempted when the engine is operating above idle speed. • Shift to or from reverse only when the snowmobile is stopped and when engine speed is at idle. • Look behind the vehicle before and while backing. • Avoid sharp turns. • Apply throttle slowly. Engaging Reverse 1. Stop the snowmobile and leave the engine idling. 2. Make sure the area behind your vehicle is clear. 3. Push the yellow reverse button on the left-hand control for one second, then release. The engine will automatically reduce RPM and start a reverse rotation. A flashing reverse light on the instrument panel will indicate that the machine is in reverse. 4. Apply the throttle slowly to make sure the machine is in reverse. NOTE: The maximum engine RPM will be 6000 when in reverse. NOTE: If the engine stops running, the snowmobile will be in forward gear when it's restarted. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
61
OPERATION
Electronic Reverse (PERC
t
)
Electronic reverse will activate only if the engine is below 4000 RPM. If
your machine is running at an altitude of over 6000 feet, adjust the igni-
tion setting as described on page 62.
Engaging Reverse
1.
Stop the snowmobile and leave the engine idling.
2.
Make sure the area behind your vehicle is clear.
3.
Push the yellow reverse button on the left-hand control for one sec-
ond, then release. The engine will automatically reduce RPM and
start a reverse rotation. A flashing reverse light on the instrument
panel will indicate that the machine is in reverse.
4.
Apply the throttle slowly to make sure the machine is in reverse.
NOTE:
The maximum engine RPM will be 6000 when in reverse.
NOTE:
If the engine stops running, the snowmobile will be in forward
gear when it's restarted.
WARNING
Improper reverse operation, even at low speeds, may cause loss of control,
resulting in serious injury or death. Damage will occur to the chaincase or
transmission if shifting is attempted when the engine is operating above idle
speed.
•
Shift to or from reverse only when the snowmobile is stopped and when
engine speed is at idle.
•
Look behind the vehicle before and while backing.
•
Avoid sharp turns.
•
Apply throttle slowly.