2008 Polaris 800 Dragon RMK Owners Manual - Page 38
2008 Polaris 800 Dragon RMK Manual
Page 38 highlights
Instrumentation FEATURES MFD Digital Display Programs Engine Program Air Temperature (accessory) The MFD displays actual air temperature. Press and hold the MODE switch for ten seconds to switch between standard and metric units of measurement. Altimeter (accessory) The rider can calibrate the altimeter for current atmospheric conditions. Altimeter accuracy will be +/-300 ft. (91 m) after adjustment. NOTE: When "ALt-FT" displays, the program is in the standard mode. If only "ALt" displays, the program is in the metric mode. 1. Enter the Engine Program. 2. Press and release the SET button until the altimeter screen is active. 3. Press and hold the SET button for five seconds. 4. When the digits begin to flash, release the SET button. 5. Press and release the SET button to advance the reading in 50-foot (15 m) increments, or press and hold the button to advance quickly. Adjust the altitude display to within 50 ft. (15 m) of the current altitude. NOTE: The gauge reads barometric pressure and allows the rider to compensate for daily fluctuations in air pressure. The gauge can adjust the displayed altitude to +/- 1300 ft. (396 m) from the preset value. It will adjust up to +1300 ft. (396 m) above the calibrated altitude. Once the +1300 ft. (396 m) offset has been reached, the next adjustment is 1300 ft. (396 m) from the calibrated altitude, and 50 ft. (15 m) will be added to the altitude each time the SET button is pressed. 6. Press the MODE button to hold the reading at the adjusted value. If the MODE button is not pressed within five seconds, the gauge will automatically save the new setting. 35