2009 Polaris 600 IQ Shift Owners Manual - Page 77

2009 Polaris 600 IQ Shift Manual

Page 77 highlights

MAINTENANCE Spark Plugs A new engine can cause temporary spark plug fouling due to the preservative added during the assembly process. Avoid prolonged idle speeds, which cause plug fouling and carbonization. Refer to your Owner's Manual Supplement for the specific spark plug to be used in your machine. Change the spark plugs every 2000-2500 miles (3200-4000 km). NOTICE Using non-recommended spark plugs can result in serious engine damage. A spark plug with a heat range too high will always cause engine damage if the engine is operated in conditions more severe than intended for that plug. Always use the spark plugs recommended for your snowmobile. See your Owner's Manual Supplement Use recommended spark plugs with the proper gap. Use only resistor-type spark plugs. Torque spark plugs to 18-22 ft. lbs. (24-30 Nm). Always carry spare spark plugs. Spark plug condition is indicative of engine operation. The spark plug firing end condition should be read after the engine has been warmed up and the vehicle has been driven at higher speeds. Immediately check the spark plug for correct color. CAUTION A hot exhaust system and engine can cause burns. Wear protective gloves when removing a spark plug for inspection. NOTE: Incorrect fuel mixture can often cause a spark plug to appear too dark or too light in color. Before changing spark plug heat ranges, be sure the correct main jet is installed in the carburetor(s). Refer to the Owner's Manual Supplement or see your dealer. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129

74
MAINTENANCE
Spark Plugs
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process.
Avoid prolonged idle speeds,
which cause plug fouling and carbonization.
Refer to your Owner's Manual Supplement for the specific spark plug to
be used in your machine.
Change the spark plugs every 2000-2500 miles (3200-4000 km).
Spark plug condition is indicative of engine operation.
The spark plug
firing end condition should be read after the engine has been warmed up
and the vehicle has been driven at higher speeds.
Immediately check the
spark plug for correct color.
NOTE:
Incorrect fuel mixture can often cause a spark plug to appear
too dark or too light in color.
Before changing spark plug heat
ranges, be sure the correct main jet is installed in the carbure-
tor(s). Refer to the Owner's Manual Supplement or see your
dealer.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
A spark plug with a heat range too high will always cause engine damage if
the engine is operated in conditions more severe than intended for that plug.
Always use the spark plugs recommended for your snowmobile. See your
Owner’s Manual Supplement.
Use recommended spark plugs with the proper gap.
Use only resistor-type spark plugs.
Torque spark plugs to 18-22 ft. lbs. (24-30 Nm).
Always carry spare spark plugs.
CAUTION
A hot exhaust system and engine can cause burns. Wear protective gloves
when removing a spark plug for inspection.