2009 Polaris IQ Turbo Switchback Owners Manual - Page 63
2009 Polaris IQ Turbo Switchback Manual
Page 63 highlights
THE PERFECT FIT Handlebar Adjustments Use the RIDER SELECT feature to adjust handlebar position. See page 30. Use the following steps to adjust handlebar angle at the handlebar block. 1. Remove the handlebar cover to expose the handlebar and the four adjuster block bolts. Tip: If equipped, remove the mountain bar. Handlebar Cover 2. Using a 7/16" wrench, loosen the four nuts on the bottom of the adjuster block (turn handlebar to left or right for access to back nuts). Tip: If necessary, pry the blocks apart with a screwdriver. Adjuster Block Bolts 3. Adjust the handlebar to the desired height. Be sure handlebars, brake lever and throtNuts tle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. 4. Torque the front bolts first, then torque the rear bolts. Torque the bolts to 11-13 ft. lbs. (15-18 Nm). 5. Reinstall the handlebar cover. 60