2009 Polaris Vegas Low Owners Manual - Page 58

2009 Polaris Vegas Low Manual

Get 2009 Polaris Vegas Low PDF manuals and user guides View all 2009 Polaris Vegas Low manuals

Page 58 highlights

Engine Oil Level A dipstick attached to the oil fill cap registers the engine oil level. We recommend the use of only VICTORY brand Semi-Synthetic 20W-40 Motor Oil or an equivalent oil designed for use with wet clutches (such as those with a JASO MA rating). 1. With the transmission in neutral, start and run the engine for several minutes. 2. Shut the engine off and wait for 3-5 minutes. 3. Straddle the motorcycle on level ground and bring it to a vertical position. Remove the oil fill cap/dipstick (1) and wipe the dipstick clean. Reinstall the dipstick and turn the cap clockwise until it seats. 4. Remove the dipstick again and read the oil level. 5. If necessary, add or remove oil to bring the level into the area on the dipstick above the ADD mark and below the FULL mark. Repeat step 1 and step 2 each time you adjust the oil level. PRE-OPERATION CHECK 1 2 3 1. Oil Fill Cap/Dipstick 2. ADD Mark 3. FULL Mark WARNING Do not operate the motorcycle with the oil level above the FULL mark or below the ADD mark. Operating the engine with too much or too little oil can cause serious engine damage or engine seizure, resulting in loss of control. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
53
PRE-OPERATION CHECK
Engine Oil Level
A dipstick attached to the oil fill cap registers the engine oil level.
We recommend the use of only VICTORY brand Semi-Synthetic
20W-40 Motor Oil or an equivalent oil designed for use with wet
clutches (such as those with a JASO MA rating).
1.
With the transmission in neutral, start and run the engine for
several minutes.
2.
Shut the engine off and wait for 3-5 minutes.
3.
Straddle the motorcycle on level ground and bring it to a
vertical position. Remove the oil fill cap/dipstick (1) and wipe
the dipstick clean. Reinstall the dipstick and turn the cap
clockwise until it seats.
4.
Remove the dipstick again and read the oil level.
5.
If necessary, add or remove oil to bring the level into the area
on the dipstick above the ADD mark and below the FULL
mark. Repeat step 1 and step 2 each time you adjust the oil
level.
Do not operate the motorcycle with the oil level above the FULL mark or below the ADD mark.
Operating the engine with too much or too little oil can cause serious engine damage or engine seizure,
resulting in loss of control.
WARNING
1
2
3
2. ADD Mark
3. FULL Mark
1. Oil Fill Cap/Dipstick