2009 Polaris Vegas Owners Manual - Page 51

INSTRUMENTS, FEATURES AND CONTROLS Right Handlebar Controls Engine Stop/Run Switch The engine stop/run switch completes or interrupts the ignition, starter, and fuel pump circuits. To complete the circuits, allowing the engine to start and run, press the lower portion of the engine stop/run switch (RUN position). To interrupt the circuits, press the upper portion of the switch (STOP position). The engine should not start or run when the switch is in the STOP position. Use the engine stop/run switch to turn the engine off under either normal or emergency conditions. 1 2 Starter Button The starter button works only when the engine stop/run switch is in the RUN position and the transmission is in neutral or the clutch is disengaged. To engage the engine starter motor, press the right side of the starter button. For complete engine starting procedures, see Starting the Engine, page 71. 3 Throttle Control Grip The throttle control grip controls the engine speed. To increase engine speed, twist the throttle control grip toward you. To decrease engine speed, twist the grip away from you. When you release the grip, it returns to the idle speed position. 1. 2. 3. 4. 4 Engine Stop/Run Switch Starter Button Throttle Control Grip Brake Lever Front Brake Lever The front brake lever is located on the far side of the right handlebar grip. To apply the front brake, pull the front brake lever toward the handlebar. For braking procedures in various riding conditions, see Braking (page 77). 46