2010 Polaris Cross Roads Owners Manual - Page 52
2010 Polaris Cross Roads Manual
Page 52 highlights
9922671.book Page 48 Tuesday, June 16, 2009 12:06 PM Instruments/Features/Controls Instrument Cluster (Cross Roads) Indicator Lamps Lamp Indicates Neutral High Beam Turn Signal Condition This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position. This lamp illuminates when the headlamp switch is set to high beam. The turn signal indicator flashes when the left, right, or both turn signals (hazard) are active. If a bulb fails, or if there is a short circuit in the signal system, the lamp flashes at more than twice the normal rate. This lamp illuminates when the ignition switch is in the ON position and the engine is off, indicating that the indicator circuit is functioning properly. This lamp also illuminates if engine oil pressure drops below safe operating pressure. If this lamp illuminates while the engine is running, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. Low Oil Pressure Controls 48