2010 Polaris Phoenix 200 Quadricycle Owners Manual - Page 54

MAINTENANCE Engine Oil Oil Recommendations Polaris recommends the use of Polaris PS-4 PLUS Performance Synthetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to be changed more frequently if Polaris oil is not used. Always use 2W-50 oil. Follow the manufacturer's recommendations for ambient temperature operation. NOTICE: Mixing brands or using a non-recommended oil may cause serious engine damage. Always use the recommended oil. Never substitute or mix oil brands. Oil Specifications Lubricant PS-4 PLUS Performance Synthetic 2W-50 4-Cycle Oil Capacity 1200 ml Drain Plug Torque 15 Nm Oil Level Maintain the oil level at the center of the sight glass. Do not overfill. NOTICE: A rising oil level between checks in cool weather driving can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil level rises to the top of the sight glass, change the oil immediately. 1. Position the vehicle on a level surface. 2. Start the engine. Allow it to idle for 30 seconds. Stop the engine. 3. View the oil level through the sight glass. 4. Remove the fill plug. Add the recommended oil as needed. 5. Reinstall the fill plug securely. 52