2010 Polaris RZR 170 Owners Manual - Page 70
2010 Polaris RZR 170 Manual
Page 70 highlights
Filter Systems Air Filter Always change the air filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 53. Access the air box through the access cover on the forward surface of the rear body panel. 1. Move or remove the storage bag. 2. Remove the four (4) access cover fasteners to remove the access cover. 3. Release the air box cover spring clips and remove the cover. 4. Remove the foam air filter. Wash the foam filter in warm soapy water, then rinse and let dry. If the filter is damaged, install a new foam filter. 5. Apply a commercially available foam filter lubricant to the foam filter. 6. Clean away any oil or sediments in the air box. 7. Reinstall the filter and air box cover. Secure the clips. MAINTENANCE Access Cover Cover Foam Filter Support Screen Clips NOTICE: Never operate the vehicle with the filter element removed. Dirt will enter the engine, causing rapid wear and severe damage to the engine. 8. Reinstall the access cover and storage bag. 67