2010 Polaris Sportsman XP 550 Owners Manual - Page 38
2010 Polaris Sportsman XP 550 Manual
Page 38 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Information Display Area Use the SELECT button (SEL) to toggle through the information area options. SELECT button operation is locked out at speeds above approximately 15 MPH (25 km/h). Tip: The reverse override switch also acts as the SELECT button when pressed and released quickly. The transmission cannot be in reverse when using the override switch as a SELECT button. This feature does not contain a vehicle speed lockout function and can be used at any operating speed. Standard/Metric Display The display can be viewed in either standard or metric units of measurement. To change units: 1. Press and hold the MODE button until vehicle speed is displayed. 2. Toggle through the information area using the SELECT button until the odometer is displayed. 3. Press and hold the MODE button until the displayed units change. Release the button. 4. New settings remain until changed using the same procedure. 12-Hour/24-Hour Clock Display 1. Press and hold the MODE button until RPM is displayed. 2. Toggle through the information area using the SELECT button until the odometer is displayed. 3. Press and hold the MODE button until the clock displays the new clock format (either 24-hour or 12-hour). Release the button. 4. New settings remain until changed using the same procedure. Odometer Mode The odometer records and displays the distance traveled by the vehicle. Trip Meter Mode The trip meters record the distance traveled by the vehicle on each trip if reset before each trip. To reset a trip meter, select the trip meter 1 or trip meter 2 mode. Press and hold the MODE button on the instrument cluster until the total changes to 0. In the Rider Information Center, the trip meter display contains a decimal point, but the odometer displays without a decimal point. Hour Meter Mode This mode logs the total hours the engine has been in operation. 35