2010 Polaris Trail Boss 330 Owners Manual - Page 56
2010 Polaris Trail Boss 330 Manual
Page 56 highlights
MAINTENANCE Lubrication Guide Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart beginning on page 49. Items not listed in the chart should be lubricated at the General Lubrication interval. The a-arms and lower control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion. Item Engine Oil Brake Fluid Drive Chain(s) Transmission Oil Swing Arm Bushings Axle Housing Tie Rod Ends XPremium All Season Grease Lift boot, clean away dirt and grease, apply fresh grease by hand and reassemble. Perform when suspension action becomes stiff, or after washing. Lube PS-4 PLUS Performance Synthetic 2W-50 DOT 4 Only O-ring chain lube or SAE 80/90 AGL Synthetic Gearcase Lube XPremium All Season Grease See page 54. See page 58. Lubricate. See page 56. Method Locate fittings on swing arm and grease with grease gun Tie Rod Ends Axle Housing Swing Arm Bushings 53