2011 Polaris Ranger 800 HD Owners Manual - Page 90
2011 Polaris Ranger 800 HD Manual
Page 90 highlights
MAINTENANCE Brakes Park Brake Adjustment Inspect and adjust park brake cable tension after the first 25 hours of operation and every 100 hours thereafter to ensure proper cable tension. Loss of tension in the park brake cable may cause "BRAKE" to display in the rider information center, along with activation of the limiting feature. If this occurs, move the park brake lever to the forward-most position, then inspect and adjust park brake cable tension. Tip: If performing this service is difficult due to conditions or location, open the hood and temporarily disconnect the park brake connector. This will inactivate the limiting function. Reconnect the connector as soon as possible, and adjust the park brake cable to proper tension. 1. Position the vehicle on a level surface. 2. Shift the transmission to neutral. 3. Loosen or tighten the nuts on the lever end of the park brake cable as needed. Steering Wheel Inspection Check the steering wheel for specified freeplay and smooth operation at the intervals outlined in the Periodic Maintenance Chart beginning on page 57. 1. Position the vehicle on level ground. 2. Lightly turn the steering wheel left and right. 3. There should be 0.8"-1.0" (20-25 mm) of freeplay. 4. If there is excessive freeplay or strange noises, or the steering feels rough or "catchy," have the steering system inspected by an authorized POLARIS dealer. 86