2011 Polaris Sportsman 500 HO Owners Manual - Page 107
2011 Polaris Sportsman 500 HO Manual
Page 107 highlights
MAINTENANCE Camber and Caster The camber and caster are non-adjustable. Rear Spring The rear shock absorber spring is adjusted by rotating the adjuster either clockwise or counter-clockwise to increase or decrease spring tension. Accessory springs are available through your POLARIS dealer. Adjuster Handlebars The handlebars can be adjusted for rider preference. WARNING! Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and serious injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer for service. 1. Remove the upper headlight pod. 2. Loosen the four handlebar bolts. 3. Adjust the handlebar to the desired height. 4. Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right. 5. Torque the front two bolts to 10-12 ft. lbs. (14-17 Nm), then torque the rear two bolts. A gap of up to 1/8" (3 mm) will remain at the rear of the clamp blocks. Handlebar Bolts 103