2013 Polaris Sportsman 550 Touring Owners Manual - Page 64
2013 Polaris Sportsman 550 Touring Manual
Page 64 highlights
OPERATION Driving Through Water Follow these procedures when driving through water: 1. Check water depth and current before crossing. 2. Choose a crossing where both banks have gradual inclines. 3. Drive slowly. Avoid rocks and obstacles. 4. Avoid operating in Maximum Depth water deeper than the bottom of the footrests. If it's unavoidable, travel slowly, balance your weight carefully and avoid sudden movements. Maintain a slow and steady forward motion. Do not make sudden turns, stops or throttle changes. NOTICE: Major engine damage can result if the vehicle is not thoroughly inspected after operation in water. Perform the services outlined in the maintenance chart. See page 70. The following areas need special attention: engine oil, transmission oil, demand drive fluid and all grease fittings. If the vehicle tips or overturns in water, or if the engine stops during or after operating in water, restarting can result in serious engine damage. Transport the vehicle to your dealer for service before restarting the engine. If this is not possible, follow the vehicle immersion inspection and drying procedures outlined on page 104, then see your dealer for service at the first opportunity. 5. After leaving water, test the brakes. Apply them lightly several times while driving slowly. The friction will help dry out the pads. 62