1999 Pontiac Montana Owner's Manual - Page 302

yellowblue 3. When the tire is almost in the stored position, turn the tire so the valve is towards the rear of the vehicle. This will help when you check and maintain tire pressure in the spare. 4. Keep raising the wheel until you hear the hoist mechanism click twice. This means the wheel is firmly stored against the underside of the vehicle. 5. Push against the wheel to be sure it does not move and is stored securely. 6. Replace all jacking tools as they were stored in the jack storage compartment and replace the compartment cover. To replace the cover, line up the tabs on the right of the cover with the slots in the cover opening. Push the cover in place and push down the tab so that it rests in the groove. This secures the cover in place. A. Strap B. Bag and Tools Unless you have the plastic "bolt-on" wheel covers, be sure to also store the center cap. When you replace the compact spare with a full-size tire, replace the bolt-on wheel covers and the center cap. Tighten them "hand tight" over the wheel nuts, using the folding wrench. C. Jack 5-30