2000 Pontiac Grand Prix Owner's Manual - Page 81

Entering Programming Mode To program features, your vehicle must be in this programming mode. Follow these steps: 1. Turn the ignition key to LOCK or OFF. 2. Remove the MALL PGM fuse from the instrument panel fuse block. See "Fuses and Circuit Breakers" in the Index. 3. Turn the ignition key to ACCESSORY. 4. Count the number of chimes you hear. You will hear two to four chimes, depending on vehicle content. See "Multifunction Alarm Locks and Lighting Choices" earlier in this section. You can now program your choices. After programming a feature, you can exit the programming mode at any time. Delayed Illumination and Exit Lighting With delayed illumination, the interior lamps will stay on for about 25 seconds after all doors are closed. With exit lighting. the interior lamps will come on and stay on for about 25 seconds whenever you remove the key from the ignition. To customize these features to your preference, see "Programmable Modes." Programmable Modes Your vehicle can be programmed to one of the following modes. Mode 1: Both Features Off (The interior lamps will turn on or off at the same instant that a door is opened or closed.) Mode 2: Delayed Illumination Only (The interior lamps will stay on for about 25 seconds after all the doors are closed, or until you lock the doors.) Mode 3: Exit Lighting Only (The interior lamps will come on whenever you remove the key from the ignition and stay on for about 25 seconds, or until you lock the doors.) Mode 4: Both Features On (This combines Modes 2 and 3.) Exiting Programming Mode To exit programming mode, turn the key from ACCESSORY to OFF and put the MALL PGM fuse back into the instrument panel fuse block. 2-13