2005 Pontiac Vibe Owner's Manual - Page 247

If the fluid level is low, add only enough of the proper fluid to bring the level into the area between dimples on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring it to the proper level. It does not take much fluid, generally less than one pint (0.5 L). Do not overfill. Notice: Use of automatic transaxle fluid labeled other than T-IV Automatic Transaxle Fluid may damage your vehicle, and the damages may not be covered by your warranty. Always use T-IV labeled automatic transaxle fluid in your vehicle. See Part D: Recommended Fluids and Lubricants on page 6-19 for more information. 3. After adding fluid, recheck the fluid level as described under "How to Check," earlier in this section. 4. When the correct fluid level is obtained, push the dipstick back in all the way; then press the tab down to lock the dipstick in place. 3. Check both sides of the dipstick, and read the lower level. The fluid level must be between the two dimples in the hot range. 4. If the fluid level is in the acceptable range, push the dipstick back in all the way; then press the tab down to lock the dipstick in place. How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transaxle fluid to use. See Part D: Recommended Fluids and Lubricants on page 6-19. 5-25