2008 Pontiac Solstice Owner's Manual - Page 273

Accessing the Tire Sealant and Compressor Kit To access the tire sealant and compressor kit: 1. Make sure the convertible top is in the up position before accessing the tire sealant and compressor kit. 2. Open the trunk. See Trunk on page 2-9 for more information. 4. Remove the tire sealant and compressor kit strap by squeezing the two tabs of the quick release buckle. 5. Remove the sealant and compressor kit from its foam container. Tire Sealant Read and follow the safe handling instructions on the sealant canister. The sealant can temporarily seal a punctures up to 1/4 inch (6 mm) in the tread area of the tire. The sealant cannot seal sidewall damage, large punctures, or a tire that has unseated from the wheel. See Roadside Assistance Program on page 7-7 if you need assistance. 3. Locate the tire sealant and compressor kit on the driver side of the vehicle, near the back corner of the trunk. The sealant can only be used to seal one tire. After usage, the sealant canister and sealant filling hose assembly must be replaced at a dealer/retailer. See Removal and Installation of Sealant Canister later in this section. 5-77