2010 Pontiac Vibe Owner's Manual - Page 110

5-2 Lighting Headlamps on Reminder A tone sounds when the ignition is turned to LOCK/OFF, the driver door is opened and the key is removed from the ignition while the lamps are on. Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. With the lever in the low-beam position, pull the lever toward you to momentarily switch to high-beams. If the headlamps are on when the lever is released, the high-beams will return to low-beam. The DRL system makes the headlamps come on at a reduced brightness when the following conditions are met: • The ignition is on with the engine running. Headlamp High/ Low-Beam Changer The headlamps must be on for this feature to work. Push the turn signal lever away from you to turn the high beams on. This instrument panel cluster light 3 comes on while the high beam headlamps are on. Pull the lever towards you to return to low beams. • The exterior lamps switch is off. • The parking brake is released. When the exterior lamp switch is turned to the headlamp position, the DRL go off and the headlamps come on. The other lamps that come on with the headlamps also come on. The headlamps automatically switch from DRL to the regular headlamps depending on the darkness of the surroundings. See Automatic Headlamp System on page 5-3. DRL also comes on if only the parking lamps are being used. Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada.