2001 Saab 9-3 Owner's Manual - Page 115

Saab 9-3 Audio System 115 Fault codes NOTE Great care should be exercised in trying to rectify a fault. If you are at all unsure, contact an authorized Saab dealer. The Audio System has a built-in diagnostics function. If a fault is detected, a fault code is generated to help dealer technicians to diagnose the fault. Below is an example of a fault code that you might be able to rectify yourself. Fault code CD/CDC ERROR 12/17/19 TAPE ERR 01 Possible cause CD is dirty, loaded wrong side up or defective. Tape broken or mechanical fault in deck. Tape snarled up or mechanical fault in deck. Cassette jammed: cannot be loaded/ejected. WARNING The CD player/CD changer is classified as Class 1 laser equipment. • Service and repair work must only be carried out by authorized technicians. • If the casing is damaged, hazardous laser radiation can occur. Adjusting the frequency steps North America/Europe If the car is taken from Europe to North America, the radio's frequency steps will need to be adjusted. • With the radio off, press and hold (mid-segment) and switch the radio on at the same time. The station presets will be cancelled and replaced by preset frequencies. TAPE ERR 02/03 TAPE ERR 11