2007 Saab 9-3 Owner's Manual - Page 231
2007 Saab 9-3 Manual
Page 231 highlights
Car care 231 License plate lighting 1 Undo the two screws and remove the lens. 2 Fit the new bulb. 3 Make sure the seal on the lens is correctly seated. 4 Refit the lens and tighten the two screws. Glove box lighting 3 1 Remove the lamp housing using a short screwdriver. 2 Fit the new bulb. 3 Insert the connector side first when refitting the lamp. Trunk lighting, Sport Sedan The lamp fitting is located under the parcel shelf. 1 Remove the lamp fitting by pulling down one end. 2 Fit the new bulb. 3 Insert the connector side first when refitting the lamp.
231
Car care
License plate lighting
1
Undo the two screws and remove the
lens.
2
Fit the new bulb.
3
Make sure the seal on the lens is
correctly seated.
4
Refit the lens and tighten the two
screws.
Glove box lighting
3
1
Remove the lamp housing using a short
screwdriver.
2
Fit the new bulb.
3
Insert the connector side first when refit-
ting the lamp.
Trunk lighting, Sport Sedan
The lamp fitting is located under the parcel
shelf.
1
Remove the lamp fitting by pulling down
one end.
2
Fit the new bulb.
3
Insert the connector side first when refit-
ting the lamp.