2009 Saturn Aura Owner's Manual - Page 164

Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions let you signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever returns automatically to the normal position. An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. Headlamp High/Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal/multifunction lever toward the front of the vehicle. This light on the instrument panel cluster comes on if the high beam lamps are turned on while the ignition is on. To change the headlamps from high beam to low beam, pull the turn signal lever toward the rear of the vehicle. To signal a lane change, raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever returns by itself when it is released. If the arrows flash rapidly or do not go on at all as you signal a turn or lane change, a signal bulb could be burned out and other drivers will not see your turn signal. Replace burned out bulbs to help avoid an accident. Also, check the appropriate fuses. See Fuses on page 392. 164 Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off.