2009 Saturn Outlook Owner's Manual - Page 323

Service and Appearance Care 3. Remove the two taillamp hex nut covers. 4. Remove the two hex nuts holding the taillamp assembly in place. 5. Pull out the taillamp assembly. 6. Turn the bulb socket counterclockwise and pull it straight out to remove it. 7. Replace the old bulb with a new one. 8. Reverse Steps 3 through 6 to reinstall the taillamp assembly. When reinstalling the taillamp assembly, make sure the plastic pin on the taillamp assembly lines up and is inserted correctly into the opening of the vehicle. 5-37 License Plate Lamp To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 4. Install the new bulb. 5. Reverse steps 1 - 3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp License Plate Lamp Rear Sidemarker Lamp Rear Turn Signal and Taillamps Bulb Number 194 194 3157K For replacement bulbs not listed here, contact your dealer/retailer. 2. Turn and pull the license plate lamp forward through the lift gate trim opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket.