2010 Scion xB Owner's Manual - Page 19

Tire Pressure Monitoring (warning) System OVERVIEW If tire pressure indicator is on, check/adjust each tire. After adjusting tire pressures, or after tires have been rotated or replaced, turn the ignition switch to "ON" and press and hold the " SET" button until indicator blinks three times. Let the vehicle sit for a few minutes to allow initialization to complete. Refer to the load label on the door jamb or the Owner's Manual for tire inflation specifications. If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer. Note: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light. FEATURES/OPERATIONS Tool and spare tire location Spare tire & tools Removing the spare tire (1) (2) Jack Jack handle Wheel nut wrench Spare tire SAFETY AND EMERGENCY FEATURES (1) Remove the spare tire cover. (2) Loosen and remove the bolt. Refer to the Owner's Manual for jack positioning and tire changing procedures. 17