2002 Subaru Forester Owner's Manual - Page 367

the fender. 3. Remove the bulb holder from the front turn signal light assembly by turning it counterclockwise. 4. Pull the bulb out of the socket. Install a new bulb. 5. Set the bulb holder into the front turn signal light assembly and turn it clockwise until it locks. 6. Set the front turn signal light assembly into the fender. Tighten the mounting screw. J Rear combination lights B Brake/tail and rear turn signal light HS0218 HSB007BA 1. Unlatch the rear combination light cover by pulling the knob. Open the cover up. 2. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 3. Remove the bulb from the socket. Turn signal: Pushing it and turning counterclockwise. Brake/tail: Pull the bulb out of the socket. Install a new bulb. 4. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 5. Close the cover and latch the lock. 11-58