2002 Subaru Impreza Owner's Manual - Page 325

Maintenance and service to insufficient air bleeding and trapped air in the system. Coolant capacity: Non-turbo models: MT. 7.4 US qt (7.0 liters, 6.2 Imp qt) AT. 7.3 US qt (6.9 liters, 6.1 Imp qt) Turbo models: MT. 8.1 US qt (7.7 liters, 6.8 Imp qt) AT. 8.0 US qt (7.6 liters, 6.7 Imp qt) HGB001CB 1) "FULL" level mark 2) "LOW" level mark WARNING Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed. 4. Slowly pour the coolant and fill to the radiator filler neck and to the reserve tank's "FULL" level mark. Do not pour the coolant too quickly, as this may lead 1) Rubber gaskets HG0115 5. Put the radiator cap back on and tighten firmly. At this time, make sure that the rubber gasket in the ra- CONTINUED - 11-17