2003 Subaru Baja Owner's Manual - Page 207
2003 Subaru Baja Manual
Page 207 highlights
Interior and exterior equipments HB6051BB HB6052BB 1. Before placing the crossbar on the roof rails, make sure that the T-30 torxR head screw is fully loosened from each end support. 2. Spread the inner clamp and the end support as far apart as possible. 3. With the front direction arrow label on the top right side of the crossbar pointing toward the front of the vehicle, carefully place the crossbar across the top of the vehicle so that the crossbar end supports rest on the top of the roof rails 7 inches (180 mm) rearward in the front radius of the roof rail. 4. Move the end support and inner clamp to hook under the end of the roof rail on both sides and loosely assemble the T-30 torxR head screw with the tool provided into the threaded insert in the inner clamp on each end of the crossbar. NOTE It may be necessary to start the inner clamp and end support at the center of the roof rail for easier installation, then move the crossbar forward. Use care not to cross-thread the screw in the insert if it has been removed. - CONTINUED - 6-27