2011 Subaru Tribeca Owner's Manual - Page 115
2011 Subaru Tribeca Manual
Page 115 highlights
2-14 Keys and doors form the whole procedure again beginning with part 1. 4. Open and close the door once within 15 seconds. ter code. For example, push the locking switch eight times if the leftmost digit of the code is 8. NOTE . The electronic tone will stop sounding when you start entering the number. . If you do not start entering the number using the lock knob before the electronic tone stops sounding, an error will occur. In this event, perform the registration steps again beginning with part 3 of the procedure. . If the interval between one push of the knob and the next exceeds 5 seconds, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. NOTE . When part 4 of the procedure is completed, an electronic tone will sound for 30 seconds. . If you do not perform the operations in part 4 within 15 seconds, an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with part 3 of the procedure. 6. When you have finished entering the number, push the " " side of the locking switch within 5 seconds. NOTE . An electronic tone will sound. . If you push the " " side of the locking switch when more than 5 seconds have passed, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. 7. Perform parts 5 and 6 of the procedure for each of the remaining digits of the transmitter code beginning with the second digit (counting from the left) and finishing with the eighth digit. 5. Before the electronic tone stops sounding, push the " " side of the power door locking switch the same number of times as the leftmost digit of the transmit-