2007 Toyota Camry Navigation Manual
2007 Toyota Camry Manual
2007 Toyota Camry manual content summary:
- 2007 Toyota Camry | Navigation Manual - Page 1
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation I Initial screen ...2 Touch screen operation ...3 Inputting letters and numbers/List screen operation ...4 Function help ...7 Map screen operation ...8 Current position display ...8 Screen scroll operation ...9 Switching - 2007 Toyota Camry | Navigation Manual - Page 2
screen D Maintenance information This system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen - 2007 Toyota Camry | Navigation Manual - Page 3
sounds. Do not use objects other than the finger to touch the screen. D When you look at the screen through polarised material such as polarised sunglasses, the screen may be dark and hard to see. If so, change the angle of the screen or take off your sunglasses. INFORMATION D If the system does - 2007 Toyota Camry | Navigation Manual - Page 4
keys, touch "A−Z" or On certain letter entry screens, letters can be entered in upper or lower case. " ". INFORMATION Keyboard layout can be changed. (See page 83.) : Enter letters by touching the alphabet keys directly. : Touching this button erases one letter. By holding this button, letters - 2007 Toyota Camry | Navigation Manual - Page 5
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. 5 - 2007 Toyota Camry | Navigation Manual - Page 6
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. D - 2007 Toyota Camry | Navigation Manual - Page 7
sort in order by name. "Attribute": To sort in order by attribute. "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to the right of the name. "Name Sort": To sort in alphabetical order - 2007 Toyota Camry | Navigation Manual - Page 8
set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS. INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be - 2007 Toyota Camry | Navigation Manual - Page 9
shown ( 3 ). position to Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination - 2007 Toyota Camry | Navigation Manual - Page 10
touch "Mark", the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 72. Up to 106 memory points can be registered. If there is an attempt - 2007 Toyota Camry | Navigation Manual - Page 11
name and "Info." are displayed on the top of the screen. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To register this POI as a memory point, touch "Mark". (See page - 2007 Toyota Camry | Navigation Manual - Page 12
BASIC FUNCTIONS If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To edit a memory point, touch "Edit". (See " - Editing memory points" on page 72.) To delete a memory - 2007 Toyota Camry | Navigation Manual - Page 13
BASIC FUNCTIONS - Switching the screens Any one of the screen configurations can be selected . Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 13.) : To display the dual map screen. (See page 14.) : - 2007 Toyota Camry | Navigation Manual - Page 14
be edited by touching any specific point on the right side map. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the dual map screen. Information - 2007 Toyota Camry | Navigation Manual - Page 15
150 feet (50 m), is not shown. In areas where the foot print map is available the map scale changes from to when at the minimum range. Foot print map For the area which is covered by the foot print map (Some areas in the following cities: Detroit, Chicago, N.Y., L.A), you can switch to - 2007 Toyota Camry | Navigation Manual - Page 16
BASIC FUNCTIONS INFORMATION D If the map or the current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to perform scrolling on the - 2007 Toyota Camry | Navigation Manual - Page 17
, touch the building name. You can see details of the selected POIs. " North−up screen " Heading−up screen The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. 17 - 2007 Toyota Camry | Navigation Manual - Page 18
BASIC FUNCTIONS 18 - 2007 Toyota Camry | Navigation Manual - Page 19
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search II 20 21 22 24 24 24 29 32 35 36 36 37 37 38 39 40 40 Quick reference ("Destination" screen) ...Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination - 2007 Toyota Camry | Navigation Manual - Page 20
the many POIs (Points of Interest) that have already been stored in the system's database...29 3 "POI Category" A destination can be selected from the POI destinations and from the previous starting point...36 5 "Memory" The location can be selected from the registered "Memory points". (To register - 2007 Toyota Camry | Navigation Manual - Page 21
Map" A destination can be selected simply by touching the location on the displayed map...37 8 "Intersection" The names Function help for the "Destination" screen can be viewed on this screen...7 11 "Change" To change the search area, touch this button...22 12 Quick access touch−screen buttons One - 2007 Toyota Camry | Navigation Manual - Page 22
the search area in order to set a destination from a different area by using "Address", "POI Name", "Freeway Ent./Exit" or "Intersection". 1. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. (For map database information and updates - 2007 Toyota Camry | Navigation Manual - Page 23
DESTINATION SEARCH U.S.A. Button "US1" "US2" States included in the search area Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan Ohio - 2007 Toyota Camry | Navigation Manual - Page 24
if "Enter" is touched even while driving. Touch any of the quick access touch− screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See "Starting route guidance" on page 40.) To use this function, it is - 2007 Toyota Camry | Navigation Manual - Page 25
display the screen for inputting a street name. 3. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) If the same address exists in - 2007 Toyota Camry | Navigation Manual - Page 26
the listed items by inputting the city name. If inputting a street name first, the screen changes. The house number can then be input. If the same address exists in more than one city, the current screen changes to the city list screen. If the above screen appears, an address range on the - 2007 Toyota Camry | Navigation Manual - Page 27
, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 2. Input a city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 27 - 2007 Toyota Camry | Navigation Manual - Page 28
Inputting a house number and a street name" on page 25.) 2. Touch the button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 25.) Touch the button - 2007 Toyota Camry | Navigation Manual - Page 29
" on the "Destination" screen. 2. Input the name of the Point of Interest. 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) When inputting the name of - 2007 Toyota Camry | Navigation Manual - Page 30
methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 2. Input the city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the button of the desired city name from - 2007 Toyota Camry | Navigation Manual - Page 31
DESTINATION SEARCH SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". SELECTING FROM THE LAST 5 CITIES (b) Selecting from the categories 2. Touch the button of the desired city name. Touch the button of the desired city name. If the navigation has not be used, no cities will be - 2007 Toyota Camry | Navigation Manual - Page 32
point 3. Set the search point via the map screen 4. Set the search point from any destination It is possible to display the names of POIs located within approximately 20 miles (32 km) from the selected search point. 3. Touch the button of the desired city center name. 32 - 2007 Toyota Camry | Navigation Manual - Page 33
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". When an arrow facing the desired point is - 2007 Toyota Camry | Navigation Manual - Page 34
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2007 Toyota Camry | Navigation Manual - Page 35
. "Show List": To display the list of POIs in the selected categories. By touching the button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) The direction arrows of POIs are - 2007 Toyota Camry | Navigation Manual - Page 36
3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2007 Toyota Camry | Navigation Manual - Page 37
screen. - Destination search by "Intersection" 1. Touch "Intersection" on the second page of the "Destination" screen. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route guidance - 2007 Toyota Camry | Navigation Manual - Page 38
page of the "Destination" screen. 3. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) If the same two streets cross - 2007 Toyota Camry | Navigation Manual - Page 39
. 2. Select the desired freeway by touching the button. 4. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 40.) "Input Name": An applicable list - 2007 Toyota Camry | Navigation Manual - Page 40
#" 1. Touch "Phone #" on the second page of the "Destination" screen. Starting route guidance After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION D If there is no match for the telephone number inputted - 2007 Toyota Camry | Navigation Manual - Page 41
"Suspending and resuming guidance" on page 66.) D If "Guide" is touched until a beep sounds, demo mode will start. Push the "MAP/VOICE" button location. D When setting the destination on a map with a scale larger than 0.5 miles (500 m), the map scale changes to 0.5 miles (500 m) automatically. - 2007 Toyota Camry | Navigation Manual - Page 42
conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may provide wrong information. D To change be incorrect. Upon reception of GPS signals, it is automatically corrected. 1. You can change route preference by touching "Route Preference". 2. Select - 2007 Toyota Camry | Navigation Manual - Page 43
road Freeway Ferry 2. Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended route. This route is indicated by an orange line. "Quick2": Alternative route. This route is indicated by a purple line. 43 - 2007 Toyota Camry | Navigation Manual - Page 44
DESTINATION SEARCH 44 - 2007 Toyota Camry | Navigation Manual - Page 45
and time to destination ...Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destinations ...Setting route ...Search condition ...Detour setting ...Route preference ...Starting route from adjacent road ...Map view ...Display POI icons ...Route overview - 2007 Toyota Camry | Navigation Manual - Page 46
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some areas, the roads have not been completely - 2007 Toyota Camry | Navigation Manual - Page 47
ROUTE GUIDANCE : To display the selected map of the exit vicinity. : To scroll for farther junctions or exits. : To scroll for closer junctions or exits. : To scroll for the closest three junctions or exits. D When approaching a freeway exit or junction When the vehicle approaches an exit or - 2007 Toyota Camry | Navigation Manual - Page 48
next street name Turn direction Distance to the next turn Current street name 1 2 3 4 "Proceed about 5 miles." "In a quarter of a mile, right turn." "Right turn." (Beep sound only) 48 - 2007 Toyota Camry | Navigation Manual - Page 49
circle." "In a quarter of a mile, traffic circle ahead, and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U−turn if the distance between two one−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 - 2007 Toyota Camry | Navigation Manual - Page 50
guidance command, push the "MAP/VOICE" button to hear it again. D To adjust the voice guidance volume, see "Volume" on page 67. The system announces the approach to the final destination. 1 2 Distance and time to destination "Your destination is ahead." "You have arrived at your destination. The - 2007 Toyota Camry | Navigation Manual - Page 51
ROUTE GUIDANCE 1. Touch this button to display the following screen. To switch to estimated arrival time. To switch to estimated travel time. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. Setting and deleting destination - - Adding - 2007 Toyota Camry | Navigation Manual - Page 52
- Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 4. Touch the desired "Add" system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically - 2007 Toyota Camry | Navigation Manual - Page 53
If "No" is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 3. Touch the destination for deletion. "Delete All": To delete - 2007 Toyota Camry | Navigation Manual - Page 54
"Quick", "Quick1", "Quick2" or "Short" and touch "OK". 1. Touch "Route". 1. Touch "Route". 2. Touch "Search Condition". The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 51 and 54.) 2. Touch "Detour". 54 - 2007 Toyota Camry | Navigation Manual - Page 55
of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions. 2. Touch "Route Preference" to change the conditions - 2007 Toyota Camry | Navigation Manual - Page 56
the vehicle is driven parallel along the freeway.) 3. Select the desired route preference by touching the button. When searching for a route, the system will avoid routes when the indicator is off. 4. After choosing the desired route preference, touch "OK". 1. Touch "Route". 2. Touch "Start from - 2007 Toyota Camry | Navigation Manual - Page 57
the map screen. You can also set their location as a destination and use them for route guidance. desired Point of Interest category to display POI location symbols on the map screen. By selecting this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). - 2007 Toyota Camry | Navigation Manual - Page 58
icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols of those locations on the map screen. D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will - 2007 Toyota Camry | Navigation Manual - Page 59
from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 40.) 2. Touch "Route Overview". 59 - 2007 Toyota Camry | Navigation Manual - Page 60
point which you choose is displayed on the map screen. The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 51 and 54.) "Turn List": The following screen displays the list of the roads up to the destination - 2007 Toyota Camry | Navigation Manual - Page 61
ROUTE GUIDANCE - Route preview - Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the next destination. 1. Touch " - 2007 Toyota Camry | Navigation Manual - Page 62
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2007 Toyota Camry | Navigation Manual - Page 63
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use IV 64 65 66 67 68 70 71 72 76 76 77 77 78 80 80 81 Quick reference ("Menu" screen) ...Quick reference ("Setup" screen) ...Suspending and resuming guidance ...Volume ...User selection ...My places ... - 2007 Toyota Camry | Navigation Manual - Page 64
DVD" Displays information regarding the disc version or covered area...186 5 "Select User" Up to 3 different settings for different users can be memorized...68 6 "Setup" Enables various settings for the navigation system...65, 81 7 "My Places" Enables changes to "Memory points", "Home" and "Areas to - 2007 Toyota Camry | Navigation Manual - Page 65
km" or "miles" can be selected...82 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...82 3 "Keyboard Layout" Key layout can be changed...83 4 "Time Zone" The desired time zone can be selected...84 5 " - 2007 Toyota Camry | Navigation Manual - Page 66
guidance can be set in all modes...87 11 "Auto Voice Guidance" Automatic voice guidance can be set...87 12 "Pop−up Message" Selection of 13 "Calibration" Adjustment of the current vehicle position mark can be done manually...88 14 "Default" This touch−screen button initializes all of the settings - 2007 Toyota Camry | Navigation Manual - Page 67
needed, touch "OFF" to disable the feature. When selected the number or "OFF" will be highlighted. 3. Touch "OK" to confirm your selection. The screen will change to the current position map with route guidance. 67 - 2007 Toyota Camry | Navigation Manual - Page 68
even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator - 2007 Toyota Camry | Navigation Manual - Page 69
D To register When a button that is already registered is touched, the following screen appears. D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". To replace, touch "Yes". To cancel the re. placement, touch "No" or 2. To register, touch "Yes - 2007 Toyota Camry | Navigation Manual - Page 70
ADVANCED FUNCTIONS D To delete user My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 24, " - Destination search by Quick access" on page 24 and " - Designation search by Memory" on - 2007 Toyota Camry | Navigation Manual - Page 71
OK". To edit registered information, see " - Editing memory Points" on page 72. INFORMATION Up to 106 memory points can be registered. 2. Enter the location in the same way as for a destination search. (See "Destination search" on page 21.) After memory point registration is completed, the "Memory - 2007 Toyota Camry | Navigation Manual - Page 72
The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. D To change "Icon" 1. Touch "Icon" names. The names can be displayed on the map. (See page 74.) "Location": To edit location information. (See page 75.) "Phone #": To edit telephone numbers. (See - 2007 Toyota Camry | Navigation Manual - Page 73
ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or - 2007 Toyota Camry | Navigation Manual - Page 74
ADVANCED FUNCTIONS It is possible to replace a registered attribute. DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 3. To replace the attribute, touch "Yes". To return to the previous screen, touch . "No" or 1. Touch "Del.". 2. Enter the name using the - 2007 Toyota Camry | Navigation Manual - Page 75
MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory - 2007 Toyota Camry | Navigation Manual - Page 76
Destination search by Home" on page 24.) 1. Touch "Delete". 2. Enter the location in the same way as for a destination search. (See "Destination search" button to be deleted. "Delete All": To delete all memory points in the system. 3. To delete the memory point, touch "Yes". To cancel the deletion - 2007 Toyota Camry | Navigation Manual - Page 77
Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. location in the same way as for a destination search, or display the map of the area to be avoided. (See "Destination search" on page 21.) 5. Touch either or to change the size - 2007 Toyota Camry | Navigation Manual - Page 78
": To edit the name of the area to avoid. The names can be displayed on the map. (See page 79.) "Location": To edit area location. (See page 79.) "Area Size": To edit area size. (See page 80.) "Active": To turn on or off the area to avoid feature. To turn on the feature touch - 2007 Toyota Camry | Navigation Manual - Page 79
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous - 2007 Toyota Camry | Navigation Manual - Page 80
be deleted. 1. Touch "Delete". 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The system. 3. To delete the area, touch "Yes". To cancel the deletion, touch "No". 2. Touch the button you want to delete. "Delete All": To delete all previous points in the system - 2007 Toyota Camry | Navigation Manual - Page 81
ADVANCED FUNCTIONS Setup Setting the items shown on the "Setup" screen can be done. (See page 65.) 1. Push the "MENU" button. 3. To delete the point, touch "Yes". To cancel the deletion, touch "No". 3. Touch the items to be set. 4. Touch "OK". The previous screen will be displayed. 2. Touch " - 2007 Toyota Camry | Navigation Manual - Page 82
ADVANCED FUNCTIONS D Distance unit Distance unit can be changed. 1. Touch "Setup" on the "Menu" screen. D Estimated travel time The speed that is used for the calculation of the estimated travel time and the estimated - 2007 Toyota Camry | Navigation Manual - Page 83
on progress along the route, which may be affected by road conditions such as traffic jams, and construction work. D It is possible to display up to 99 hours 59 minutes. D Input key layout Key layout can be changed. 1. Touch "Setup" on the "Menu" screen. LAYOUT TYPE " "ABC" type 2. Touch - 2007 Toyota Camry | Navigation Manual - Page 84
Each touch−screen button and current street name on the map screen can be displayed or hidden. 1. Touch "Setup" on the "Menu" screen. 2. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. 3. Touch the desired time zone. The selected button is highlighted - 2007 Toyota Camry | Navigation Manual - Page 85
. The button becomes dimmed. To set the default, touch "Default". 4. Touch "OK". to display page 2 of the "Set3. Touch the category button to be changed. 2. Touch "Change" of "Display POI Icons". 4. Touch the category button to be displayed on the "Display POI Icons" top screen. 5. Touch "OK". 85 - 2007 Toyota Camry | Navigation Manual - Page 86
When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Guidance" feature is turned on, the voice recognition guidance can be heard automatically. To turn the "Voice Recognition Guidance" on: 1. Touch "Setup" - 2007 Toyota Camry | Navigation Manual - Page 87
when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Touch "Setup" on the "Menu" screen. Then touch up" screen. to display page 2 of the "Set- D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the - 2007 Toyota Camry | Navigation Manual - Page 88
/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 184. 2. Touch "Adjust" of "Calibration". The message - 2007 Toyota Camry | Navigation Manual - Page 89
position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 3. Touch "Enter". TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function - 2007 Toyota Camry | Navigation Manual - Page 90
ADVANCED FUNCTIONS 90 - 2007 Toyota Camry | Navigation Manual - Page 91
setting ...92 Dealer setting ...93 Calendar with memo ...95 Adding a memo ...96 Editing a memo ...97 Memo list ...98 Hands−free system ...99 Speech command system ...140 Help screen ...143 Screen adjustment ...143 Screen setting ...144 Beep setting ...146 Selecting a language ...147 V 91 - 2007 Toyota Camry | Navigation Manual - Page 92
be serviced, the touch−screen button color will change to orange. INFORMATION ITEMS "ENGINE OIL": Replace engine oil "OIL FILTER": Replace engine oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades - 2007 Toyota Camry | Navigation Manual - Page 93
information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. 4. Input the conditions. Notice of "Date": The next maintenance date - 2007 Toyota Camry | Navigation Manual - Page 94
edited. "Dealer": To enter the name of a dealer. (See page 94.) "Contact": To enter the name of a dealer member. (See page 94.) "Location": To set a location. (See page 94.) "Phone #": To set a telephone number. (See page 95.) "Delete Dealer": To delete the dealer information displayed on the screen - 2007 Toyota Camry | Navigation Manual - Page 95
entry when the system is turned on. (See page 3.) Memos can also be used for route guidance if the memo has been registered with location information. 1. Push the "INFO" button. On this screen, the current date is highlighted in yellow. or : To change month. : To change year. 2. Enter the number - 2007 Toyota Camry | Navigation Manual - Page 96
system is started on the memo date. (See page 3.) 1. Touch the date you want to add a memo on the "Calendar" screen. Memos can be edited by touching the list button. (See " - Editing a memo" on page 97.) "Add Memo": To add a memo. (See " - Adding a memo" on page 96.) "Mark f": To change the color - 2007 Toyota Camry | Navigation Manual - Page 97
the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 96.) "Location": To change a registered location. (See " - Adding a memo" on page 96.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page 40.) "Delete": To delete the memo - 2007 Toyota Camry | Navigation Manual - Page 98
"List" on the "Calendar" screen. D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 2. Touch the desired search condition to list the memos. "This Week": To display the list of memos for the current week. "This Month": To display the list of memos for - 2007 Toyota Camry | Navigation Manual - Page 99
your cellular phone being connected with a cable or placed on a cradle. If your cellular phone does not support Bluetooth, this system can not function. INFORMATION In the following conditions, the system may not function. D The cellular phone is turned off. D The current position is outside the - 2007 Toyota Camry | Navigation Manual - Page 100
air−conditioning vents towards the microphone. D The sound of the air−conditioning fan is loud. Empty Full It is not displayed while the Bluetooth is connecting or the phone book data is being transferred. The amount left does not always correspond with the one of your cellular phone. This system - 2007 Toyota Camry | Navigation Manual - Page 101
phone touches or is covered with metal materials. Leave the Bluetooth phone on the place where "Blue" indication is displayed. Bluetooth is a trademark owned by Bluetooth SIG, Inc. When you release your car: A lot of personal data is registered when you use the Hands−free system. When you release - 2007 Toyota Camry | Navigation Manual - Page 102
your phone into the system. Once you have registered it, you can make a hands−free call. 1. Push the "INFO" button to display the "Information" screen. This device complies with Part 15 of the FCC Rules and RSS−210 Rules. Operation is subject to the following two conditions: (1) this device may not - 2007 Toyota Camry | Navigation Manual - Page 103
to the system. 7. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetooth phone in a condition where connection - 2007 Toyota Camry | Navigation Manual - Page 104
switch is set at ACC or ON. D Reconnecting the Bluetooth phone If the Bluetooth phone is disconnected with a poor reception from the Bluetooth network when the ignition switch is set at ACC or ON, the system automatically reconnects the Bluetooth phone. In this case, the connection result is not - 2007 Toyota Camry | Navigation Manual - Page 105
phone After you enter the Bluetooth phone, you can call by using hands−free system. You can call using the 7 methods described below. D By dial You can call by inputting the telephone number. This cannot be operated while driving. D By phone book You can call by phone book data which is transferred - 2007 Toyota Camry | Navigation Manual - Page 106
can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, cannot be operated while driving. D When you call by phone book, the name (if registered) is displayed. D When you wheel. 2. Touch "Incoming Calls" to display the "Incoming Calls - 2007 Toyota Camry | Navigation Manual - Page 107
are also memorized in the system and "Abs." is displayed on the left side of the number. D Unnoticed telephone number such as a public telephone is not memorized in the system. 3. Select the desired number from the list. Touch or push of the steering wheel. D An international phone call may - 2007 Toyota Camry | Navigation Manual - Page 108
in the phone book. For setting the voice recognition, see "D Setting the voice recognition" on page 125. Example: Call Charlize. 2. Touch the desired number to call. You can change the page by command of voice recognition, see "Speech command system" on page 140 and "Help screen" on page 143.) 108 - 2007 Toyota Camry | Navigation Manual - Page 109
, please say "Dial"." You: "Dial." System: "Dialing the name." Now you can call Charlize. Cancelling the voice recognition The voice recognition will be cancelled when you do the following. D Keep on pushing the talk switch. D Push of the steering wheel. D Touch "Cancel". (Except for recognizing - 2007 Toyota Camry | Navigation Manual - Page 110
by giving a desired number. SENDING A TONE You can send a tone by giving a desired number. D By POI call You: System: Push the talk switch. "After the beep, please say the number." You: "812387." System: "When ready, please briefly push the talk switch or push the off−hook switch to dial." You - 2007 Toyota Camry | Navigation Manual - Page 111
the Bluetooth phone - Talk on the Bluetooth phone You cannot change from Hands−free call to cellular phone call while driving. When you change the manual that comes with your cellular phone. When a call is received, this screen is disor push played with a sound. Touch of the steering wheel to - 2007 Toyota Camry | Navigation Manual - Page 112
operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the phone book. Touch the desired number to input the key. To hang up the phone: or push of the steering Touch wheel. This cannot be operated while driving. If - 2007 Toyota Camry | Navigation Manual - Page 113
tone. (For registering the speed tone, see "(b) Registering the speed tone" on page 115.) - Change the settings of the Bluetooth phone (a) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be - 2007 Toyota Camry | Navigation Manual - Page 114
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. 3. Select the data you want to register. 5. Touch the touch−screen button you want to register in. The latest dialed - 2007 Toyota Camry | Navigation Manual - Page 115
OTHER FUNCTIONS D Deleting all of the speed dial (b) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 3. Touch "Yes". 1. Touch "Delete All" of "Speed Dial". 1. Touch "Register" of "Speed Tone". V 2. Touch "Yes". 2. Use the - 2007 Toyota Camry | Navigation Manual - Page 116
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 3. Input the number and touch "OK". If you select a touch−screen button you register before, this screen is displayed. 5. Touch "Yes" if you want to overwrite it. 1. Touch "Edit" of "Speed Tone". 4. Touch the desired touch− - 2007 Toyota Camry | Navigation Manual - Page 117
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. 3. Use the software keyboard to input the name. 5. Touch "YES". 1. Touch "Delete" of "Speed Tone". V 4. Input the number and touch " - 2007 Toyota Camry | Navigation Manual - Page 118
OTHER FUNCTIONS D Deleting all the speed tone (c) Setting the volume 3. Touch "Yes". 1. Touch "Delete All" of "Speed Tone". 1. Touch "Volume" to display the "Volume Settings" screen. 2. Touch "Yes". 2. Touch "−" or "+" to adjust the "Voice Volume" or "Ring Volume". "Voice Volume" ...Adjusting - 2007 Toyota Camry | Navigation Manual - Page 119
OTHER FUNCTIONS D Automatic volume settings for high speed You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is under 43 mph (70 km/h), previous volume is back.) Each time you touch "Adaptive Volume Control", you can switch on or off. D Initializing the settings - 2007 Toyota Camry | Navigation Manual - Page 120
display. D Auto answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the When the ignition switch is set at ACC or ON and the Bluetooth is automatically connected, the connection check is displayed. Touch "ON" of "Auto Answer" and "−" - 2007 Toyota Camry | Navigation Manual - Page 121
the telephone numbers in your Bluetooth phone to the system. Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. V 1. Touch "Transfer" to - 2007 Toyota Camry | Navigation Manual - Page 122
group you want to transfer the data to. 4. Transfer the phone book data to the system using the Bluetooth phone. This screen appears while transferring. To cancel it, touch "Cancel". If the transferring is interrupted on the way, the phone book data transferred until then can be memorized in the - 2007 Toyota Camry | Navigation Manual - Page 123
. D Editing the name When you don't input the name, the number is displayed. 3. When you complete the edit, touch "OK". 1. Touch "Register" of "Phone Book". 1. Touch "Name". V 2. Touch the desired touch−screen button to edit the phone book. 2. Use the software keyboard to input the name. 123 - 2007 Toyota Camry | Navigation Manual - Page 124
OTHER FUNCTIONS D Editing the phone number You can register a phone number in "TEL1" and "TEL 2" separately. Up to 2 numbers a person can be registered. D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find - 2007 Toyota Camry | Navigation Manual - Page 125
OTHER FUNCTIONS D Setting the voice recognition You can set the voice recognition. Up to 20 numbers can be registered for the voice recognition. 2. Select the desired group. 3. Touch "PLAY" to play the voicetag. If you want to delete it, touch "Delete" and "OK". 1. Touch "Voice Rec.". V 2. - 2007 Toyota Camry | Navigation Manual - Page 126
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. D Editing the data You can edit the registered data. 3. Confirm the added data on the screen and touch "OK". 1. Touch "Add to". 1. Touch "Edit". 2. Select - 2007 Toyota Camry | Navigation Manual - Page 127
D Deleting the data You can delete the data. When you release your car, delete all your data on the system. 3. Touch the desired touch−screen button. When you edit the data, touch "OK". 1. Touch "Delete" of "Phone Book". 3. Touch "Yes". You can also delete it in the following way. V 1. Touch - 2007 Toyota Camry | Navigation Manual - Page 128
OTHER FUNCTIONS D Deleting all the phone data 2. Select the desired data. 4. Touch "Yes". 1. Touch "Delete All" of "Phone Book". 3. Touch "Delete". 2. Select the deleting method. "Group Data" ...Deleting all the phone data in group. "All Contact Data" ...Deleting all the phone data. 128 - 2007 Toyota Camry | Navigation Manual - Page 129
OTHER FUNCTIONS 3. When you select "Group Data", the "Select Group" screen is displayed. You can also delete it in the following way. 3. Touch "Yes". 1. Touch "Phone Book". 4. Select the desired group. V 2. Touch "Delete All". 5. Touch "Yes". 129 - 2007 Toyota Camry | Navigation Manual - Page 130
OTHER FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" are registered by default. You can change "Group 01" − "Group 19" into desired names. D Selecting a group icon 3. When you complete all the edit, touch "OK". 1. Touch "Icon". 1. Touch " - 2007 Toyota Camry | Navigation Manual - Page 131
OTHER FUNCTIONS D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting (excluding "No Group"). 3. Touch "Yes". 1. Touch "Name". 1. Touch "Delete" of "Group Name". V 2. - 2007 Toyota Camry | Navigation Manual - Page 132
the group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. INDIVIDUALLY ALL AT ONCE 1. Touch "Delete All" of "Group Name". 1. Touch "Delete All" on the "Outgoing Calls" or "Incoming Calls" screen - 2007 Toyota Camry | Navigation Manual - Page 133
using some functions of the Hands−free system. It is useful when you leave your car with the hotel or you don't book data but also the memory points in the navigation system, etc. will be deleted. (See "D Initializing the security code" on page 135.) 2. Touch "Change". V 1. Touch "Phone Book Lock - 2007 Toyota Camry | Navigation Manual - Page 134
Book Lock When you set the phone book lock, you can have the following functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book numbers. D Display of phone information screen. D Changing the security code. When you set this function, - 2007 Toyota Camry | Navigation Manual - Page 135
OTHER FUNCTIONS D Initializing the security code You can initialize the settings. - Set a Bluetooth phone D Selecting a Bluetooth phone In case you register more than one Bluetooth phone, you need to choose a favorite one. 3. Touch "Yes". 1. Touch "Default". 1. Touch "Settings" to display the " - 2007 Toyota Camry | Navigation Manual - Page 136
which is displayed on the screen. You can change it into a desired name. "Bluetooth Device Address" ...The address peculiar to the system. You cannot change it. Although you can register up to 6 Bluetooth phones in the system, only one Bluetooth phone can function at a time. 1. Select the desired - 2007 Toyota Camry | Navigation Manual - Page 137
a device name, the name registered in your cellular phone is not changed. 2. Touch "Change". 1. Touch "Change". D Changing the Bluetooth settings You can change the display and settings of Bluetooth information on the system. The information displays the following items. "Device Name" ...The name - 2007 Toyota Camry | Navigation Manual - Page 138
OTHER FUNCTIONS 1. Touch "Bluetooth". 3. Use the software keyboard to input the device name. You can input up to 20 characters. 5. When you complete the setting, touch . 2. Touch "Change" of "Device Name" or "Passkey". 4. Input a Passkey with 4 − 8 digits. When you touch A, the input number is - 2007 Toyota Camry | Navigation Manual - Page 139
settings. You can initialize the settings. D Deleting a Bluetooth phone 1. Touch "Default". 1. Touch "Delete" of "Bluetooth Telephone". 3. Touch "Yes". When you delete the telephone while another Bluetooth phone is connecting, this message is displayed. V 2. Touch "Yes". 2. Select the - 2007 Toyota Camry | Navigation Manual - Page 140
can display the information of the Bluetooth phone before you delete it and you can make sure whether the telephone you delete is correct or not. Speech command system The speech command system enables you to operate the navigation system and audio system by giving a command. 2. When you complete - 2007 Toyota Camry | Navigation Manual - Page 141
command switch and try again. If no command is given, a beep sounds and the indicator disappears 6 seconds later. If the system does not recognize your speech, the system will respond with this message ("System does not recognize this command, please rephrase your command."). Start the operation - 2007 Toyota Camry | Navigation Manual - Page 142
"Enter destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add to " or "Replace " is displayed on the in its category. INFORMATION In the following conditions, the system may not recognize the command properly. D The command is not - 2007 Toyota Camry | Navigation Manual - Page 143
system has a function which displays the voice recognition help screen. You can see the command list and operating guide on it. (a) Command list 1. If the "Operating Guide command list by touching Touch "OK" after you check it. or . Touch "OK" after you check it. or . V 1. Touch the desired button - 2007 Toyota Camry | Navigation Manual - Page 144
is touched. To turn the display screen back on, push any button such as "INFO Depending on the position of the headlight switch, the screen changes to the day mode or night mode. To display the condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 144 - 2007 Toyota Camry | Navigation Manual - Page 145
select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch−screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio screen 20 seconds after - 2007 Toyota Camry | Navigation Manual - Page 146
"INFO" button. 1. Touch "Delete personal data". The "Delete personal data" screen appears. 3. Touch "Yes". 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off" again. 2. Touch "Delete". The "Confirmation to delete all personal data" screen appears. 146 - 2007 Toyota Camry | Navigation Manual - Page 147
. 2. Touch "Language". 3. Touch "English", "Français" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "I Agree". The language is - 2007 Toyota Camry | Navigation Manual - Page 148
OTHER FUNCTIONS 148 - 2007 Toyota Camry | Navigation Manual - Page 149
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system VI 150 151 151 155 163 174 175 Quick reference ...Using your audio system ...Some basics ...Radio operation ...CD changer operation ...Audio remote controls ...Audio system operating hints ... VI 149 - 2007 Toyota Camry | Navigation Manual - Page 150
AUDIO SYSTEM Quick reference 1 2 3 4 5 6 7 Function menu display screen To control the radio or CD changer, touch Push this button to scan radio stations. For details, see pages 156 and 160. "AUDIO" button Push this button to display the audio control screen. For details, see page 152. 150 - 2007 Toyota Camry | Navigation Manual - Page 151
D Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user's authority to operate this device. D Laser products NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is - 2007 Toyota Camry | Navigation Manual - Page 152
turns on in the last mode used. "AUDIO": Push this button to display touch− screen buttons for audio system (audio control mode). You can select the function that enables automatic return to the previous screen from the audio screen. See "(a) Automatic transition" on page 145 for details. 152 - 2007 Toyota Camry | Navigation Manual - Page 153
AUDIO SYSTEM D Switching between functions The function buttons for radio and CD changer operation are displayed on the screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected button is highlighted. INFORMATION D If the system does not respond - 2007 Toyota Camry | Navigation Manual - Page 154
broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another. D Automatic sound levelizer (ASL) When the audio sound becomes difficult to be heard due to road noise, wind noise or other noises while driving, the system adjusts to - 2007 Toyota Camry | Navigation Manual - Page 155
AUDIO SYSTEM D AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual". - Radio operation D Listening to the radio NOTICE D Never try to disassemble or oil any part of - 2007 Toyota Camry | Navigation Manual - Page 156
AUDIO SYSTEM be searched automatically one after automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise change the - 2007 Toyota Camry | Navigation Manual - Page 157
AUDIO SYSTEM D RDS (Radio Data System) Your audio system is equipped with Radio Data Systems (RDS). RDS mode R & B (Rhythm and Blues) D RELIGION D ALARM (Emergency message) "TYPE SEEK" When a program is set, "TYPE SEEK" appears. Touch this button and the system starts to seek the station in - 2007 Toyota Camry | Navigation Manual - Page 158
solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XM radio customer service agreement. "MSG" (MESSAGE) If the system receives a radio text from RDS station, "MSG" appears on the display. Touch - 2007 Toyota Camry | Navigation Manual - Page 159
AUDIO SYSTEM Customers should have their radio ID ready; the radio ID can be found by selecting "channel 000" on the radio. For details, see the "Displaying the radio ID" that follows. All fees and programming are the responsibility of the XM satellite radio and are subject to change. Satellite - 2007 Toyota Camry | Navigation Manual - Page 160
AUDIO SYSTEM D Channel category D Presetting a channel 1. Tune in the desired channel. D Selecting a appears on the touch−screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is - 2007 Toyota Camry | Navigation Manual - Page 161
AUDIO SYSTEM D Displaying the title and name To scan the currently selected channel category: Touch "TYPE SCAN" or push the "SCAN" button briefly. "SCAN" appears on the - 2007 Toyota Camry | Navigation Manual - Page 162
". If it does not change automatically, select another channel. If you want to listen to the premium channel, contact the XM satellite radio. The XM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program - 2007 Toyota Camry | Navigation Manual - Page 163
appropriate discs for this changer, see "Audio system operating hints" on page 175. INFORMATION This XM tuner supports "Audio Services" (Music and Talk) of only XM satellite radio and "Text Information"* linked to the respective "Audio Services". *Text Information includes, Station Name, (Artist - 2007 Toyota Camry | Navigation Manual - Page 164
AUDIO SYSTEM (a) Inserting discs The ignition switch must be set at ACC or ON. Your CD changer can store up to 4 discs. You can set a disc at the lowest empty disc number. 3. The amber indicators at either side of the slot start blinking. When the indicators change to green, insert only one disc. - 2007 Toyota Camry | Navigation Manual - Page 165
of the slot start blinking. After the disc is ejected, the amber indicators change to green. A disc can be inserted. D All the discs: CLOSE" button. The 1. Push the " "LOAD·EJECT" screen appears. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become - 2007 Toyota Camry | Navigation Manual - Page 166
AUDIO SYSTEM 3. Remove the disc. The indicators start blinking again and the next disc is ejected. If a disc is not remove within 15 seconds after it is ejected, the operation will be canceled. When all the discs are removed, the amber indicators change to green. A disc can be inserted. (c) - 2007 Toyota Camry | Navigation Manual - Page 167
AUDIO SYSTEM (d) Selecting a desired disc (e) Operating an audio CD D Playing an audio CD D Selecting a desired track Touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. Push the "AUDIO" - 2007 Toyota Camry | Navigation Manual - Page 168
AUDIO SYSTEM D Searching for a desired track or a disc Searching for a desired disc - While the disc is playing, touch "SCAN" and hold it until the "D·SCAN" appears on the screen. The program at the beginning of each audio disc will be played for 10 seconds. To continue listening to the program of - 2007 Toyota Camry | Navigation Manual - Page 169
AUDIO SYSTEM D Other functions "RPT": Use it for automatic repeat of the track or disc you are currently listening to. Repeating a track - While the track is playing, touch "RPT" briefly. "RPT" appears on the screen. When the track is finished, the changer will automatically go back to the - 2007 Toyota Camry | Navigation Manual - Page 170
AUDIO SYSTEM D Selecting a desired folder "FOLDERY": Touch this button to go to the next folder. "FOLDERB": Touch this button to go to the previous folder. "FOLDER LIST": - 2007 Toyota Camry | Navigation Manual - Page 171
AUDIO SYSTEM Fast forward: Push the " " button of "SEEK·TRACK" and hold it to fast forward the disc. When you release the switch, the changer will resume - 2007 Toyota Camry | Navigation Manual - Page 172
AUDIO SYSTEM D Searching for a desired file D Searching for a desired folder Touch the desired file number. The changer will start playing the selected file from the beginning. : By - 2007 Toyota Camry | Navigation Manual - Page 173
AUDIO SYSTEM D Other functions "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - While the file is playing, touch"RPT" briefly. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the beginning - 2007 Toyota Camry | Navigation Manual - Page 174
remote controls - - Steering switches " 4 spokes type Some parts of the audio system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume control switch 2 " " " " switches 3 "MODE" switch " 3 spokes type - 2007 Toyota Camry | Navigation Manual - Page 175
may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. Radio reception Usually, the problem with radio reception does not mean there is a problem with your radio − it is just the normal result of conditions outside the - 2007 Toyota Camry | Navigation Manual - Page 176
AUDIO SYSTEM causing the radio station to sound alternately strong and weak. Station interference system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise - 2007 Toyota Camry | Navigation Manual - Page 177
AUDIO SYSTEM D The MP3 player is compatible with VBR D (Variable Bit Rate). When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if fast−forward or reverse operations are used. It is not possible to check other storage conditions. The unit - 2007 Toyota Camry | Navigation Manual - Page 178
AUDIO SYSTEM CARING FOR YOUR CD CHANGER AND DISCS D Your CD changer is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperature can keep your CD changer from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or - 2007 Toyota Camry | Navigation Manual - Page 179
AUDIO SYSTEM NOTICE D Do not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system disc up to the light.) D Remove discs from - 2007 Toyota Camry | Navigation Manual - Page 180
AUDIO SYSTEM To clean a the artist's name, the album title, the music genre, the year of production, comments and other data. The contents can be freely edited number of characters, the information can be viewed when the track is played back. WMA Tag- WMA files can contain a WMA tag that is used in - 2007 Toyota Camry | Navigation Manual - Page 181
AUDIO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on - 2007 Toyota Camry | Navigation Manual - Page 182
AUDIO SYSTEM 182 - 2007 Toyota Camry | Navigation Manual - Page 183
APPENDIX SECTION APPENDIX Appendix VII Limitations of the navigation system ...184 Map database information and updates ...186 VII 183 - 2007 Toyota Camry | Navigation Manual - Page 184
, map data, etc. However, the accurate position may not be shown depending on the satellite condition, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current vehicle - 2007 Toyota Camry | Navigation Manual - Page 185
. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown or announced. D A location may have multiple names and the system will announce one or more. D Some routes may not be searched. D If the route to your destination - 2007 Toyota Camry | Navigation Manual - Page 186
replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 89.) This navigation system uses tire turning data and is designed to work - This system uses the SYSTEM SYSTEM. BY USING THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS specific system for - 2007 Toyota Camry | Navigation Manual - Page 187
system for which it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions damages is limited to the price of your copy of the apply to you. WARNINGS The DATABASE reflects reality of time, changing circumstances, and - 2007 Toyota Camry | Navigation Manual - Page 188
READ THIS NOTICE CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. ("infoUSA"). By using the POI Data, you accept and agree to all terms and conditions set forth below. 1. Ownership All rights, title and - 2007 Toyota Camry | Navigation Manual - Page 189
purposes, and not for service bureau, time−sharing or may not decompile, disassemble or reverse engineer any portion of this information, and information with any products, systems, or applications installed or , OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR - 2007 Toyota Camry | Navigation Manual - Page 190
this product to indicate business locations are the marks of their is subject to the following terms and conditions which are agreed to by you, were licensed, and not for service bureau, time−sharing or other similar , modify, decompile, disassemble or reverse engineer any portion of this Data, and - 2007 Toyota Camry | Navigation Manual - Page 191
, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN - 2007 Toyota Camry | Navigation Manual - Page 192
export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations. Entire Agreement. These terms and conditions constitute the entire agreement between - 2007 Toyota Camry | Navigation Manual - Page 193
part change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing - 2007 Toyota Camry | Navigation Manual - Page 194
Changing the map DVD−ROM CLOSE" button to close 4. Push the " the display. The map database is normally updated once a year. Contact your dealer for information about the availability and pricing . It could damage your navigation system. 3. Insert the new map DVD−ROM with the label side up. 194 - 2007 Toyota Camry | Navigation Manual - Page 195
APPENDIX INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. D To confirm the database version and disc coverage area 1. Push the "MENU" button. To display the disc coverage area, touch "Covered Area". Confirm the covered area on the - 2007 Toyota Camry | Navigation Manual - Page 196
APPENDIX 196 - 2007 Toyota Camry | Navigation Manual - Page 197
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching an intersection. These - 2007 Toyota Camry | Navigation Manual - Page 198
become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when - 2007 Toyota Camry | Navigation Manual - Page 199
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2007 Toyota Camry | Navigation Manual - Page 200
guide - - Overview buttons and guidance screen North−up or heading−up symbol This symbol indicates a map view with north−up or heading−up. Touching this symbol changes position as a memory point...10 6 "Route" Touch this button to change the route...51, 54 7 "Map View" Touch this button to browse - 2007 Toyota Camry | Navigation Manual - Page 201
ix, x, 20, 21 13 Screen configuration touch−screen button Touch this button to change the screen mode...13 14 "MENU" button Push this button to display the "Menu 144, 146 17 "GPS" mark (Global Positioning System) Whenever the vehicle is receiving signals from the GPS, this mark is displayed... - 2007 Toyota Camry | Navigation Manual - Page 202
- Registering home 0U5047 2. Touch "My Places". 4. There are 13 different methods to search your home. See "Destination search" on page 21. 1. Push "MENU" button. 3. Touch "Register" of the home. 5. Touch "Enter". The "Memory Point" screen is displayed. vi - 2007 Toyota Camry | Navigation Manual - Page 203
- Registering preset destinations 0U5047 6. Touch "OK". Registration of home is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 72.) 2. Touch "My Places". 1. Push "MENU" button. 3. Touch "Register" of the memory points. - 2007 Toyota Camry | Navigation Manual - Page 204
See "Destination search" on page 21. 6. Touch "Quick Access". 8. Touch "OK". Registration of preset destinations is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 72.) 7. Touch one of preset buttons 1 to 5. 5. Touch "Enter - 2007 Toyota Camry | Navigation Manual - Page 205
the route 0U5048 2. There are 13 different methods to search destinations. See "Destination search" on page 21. 1. Push "DEST" button. 4. Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 40.) 5. Guidance to the - 2007 Toyota Camry | Navigation Manual - Page 206
been registered. (To register "Home", see " - Registering home" on page 76.) 4. Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route 1. Push "DEST" button. 3. Touch "Enter". The navigation system performs a search for the route. x - 2007 Toyota Camry | Navigation Manual - Page 207
xi