2007 Toyota Sienna Navigation Manual
2007 Toyota Sienna Manual
2007 Toyota Sienna manual content summary:
- 2007 Toyota Sienna | Navigation Manual - Page 1
operation ...9 Current position display ...9 Screen scroll operation ...9 Switching the screens ...13 Map scale ...15 Foot print map ...16 Orientation of the map ...18 Example of navigation system operation ...18 Guiding the route ...18 Registering home ...20 1 - 2007 Toyota Sienna | Navigation Manual - Page 2
any foreign objects on the display while it is moving. It could damage your navigation system. INFORMATION Adjustment of the angle of the display can be done by pushing When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION - 2007 Toyota Sienna | Navigation Manual - Page 3
about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in - 2007 Toyota Sienna | Navigation Manual - Page 4
− screen buttons on the screen. To prevent damage to the screen, lightly touch the touch−screen buttons on the screen with the finger. When and numbers can be input via the touch screen. INFORMATION Key layout can be changed. (See "D Input key layout" on page 82.) INFORMATION D If the system does - 2007 Toyota Sienna | Navigation Manual - Page 5
will continue to be erase. : To enter in lower case. To enter in upper case. Enter numerals and symbols by touching the number keys and symbol keys directly. : Touching this button erases one letter. By holding this button, letters will continue to be erased. : Touching this button displays other - 2007 Toyota Sienna | Navigation Manual - Page 6
from the database are listed even if the entered address or name is incomplete. INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or - 2007 Toyota Sienna | Navigation Manual - Page 7
BASIC FUNCTIONS If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A 1. Touch "Sort by". 2. - 2007 Toyota Sienna | Navigation Manual - Page 8
BASIC FUNCTIONS TYPE B Function help Explanations for the functions of the "Destination", "Setup", and "Menu" screens can be viewed. : "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to - 2007 Toyota Sienna | Navigation Manual - Page 9
starting the navigation center of the screen and is shown by the cursor mark ( 1 ). INFORMATION D After battery manually, see "D Current position/tire change calibration" on page 87. The current vehicle position mark ( ) appears in the center or bottom center until the finger is removed. A street name - 2007 Toyota Sienna | Navigation Manual - Page 10
pushed, the current vehicle position mark returns to the center of the screen and the map moves as the changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) If there is already a set destination, "Add to " or "Replace - 2007 Toyota Sienna | Navigation Manual - Page 11
on a POI icon, the name and "Info." are displayed on the top of the screen. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 71. Up to 106 memory points can be registered. If there is an attempt - 2007 Toyota Sienna | Navigation Manual - Page 12
and "Info." are displayed on the top of the screen. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To edit a memory point, touch "Edit". (See " - Editing memory points - 2007 Toyota Sienna | Navigation Manual - Page 13
BASIC FUNCTIONS DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. - Switching the screens Any one of the screen configurations can be selected. Information such as the name, address, and phone number are displayed. - 2007 Toyota Sienna | Navigation Manual - Page 14
map screen. The screen shows the single map. The screen shows the dual map. The map on the left is the main map. The right side map can be edited by touching any specific point on the right - 2007 Toyota Sienna | Navigation Manual - Page 15
the longitude and latitude coordinates and the compass, to make sure that your vehicle is headed in the direction of the destination. Touch or to change the scale of the map display. The scale bar and indicator at the bottom of the screen indicates the map scale menu. The scale range - 2007 Toyota Sienna | Navigation Manual - Page 16
following cities; Detroit, Chicago, N.Y., L.A), you can switch to the foot print map on a scale of 75 feet (25 m). D To switch to the foot print map changes into when the map is scaled down to 150 feet (50 m). INFORMATION D If the map or the current position is moved to the area which - 2007 Toyota Sienna | Navigation Manual - Page 17
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 2. Using an eight−direction arrow, move the cursor to the position of the building to display building information. 3. Touch "Building Info.". 1. Touch " - 2007 Toyota Sienna | Navigation Manual - Page 18
the map The orientation of the map can be changed from north−up to heading−up by touching the of vehicle travel is always up. A red arrow indicates North. Example of navigation system operation - - Guiding the route Guidance to a destination occurs by specifying the destination using the "POI - 2007 Toyota Sienna | Navigation Manual - Page 19
FUNCTIONS 3. Enter the name of the destination. Every touch on a letter key narrows the selection. Letters that cannot be selected in the database are the list. 4. Select the destination from the displayed list. 5. Touch "Enter". The system starts route search and displays recommended routes. 19 - 2007 Toyota Sienna | Navigation Manual - Page 20
by Home" on page 26.) 1. Push the "MENU" button. 6. Touch "Guide". Route guidance starts. Guidance is done by both the screen and voice. (See "Route guidance screen "Register". INFORMATION It is possible to change the route. (See "Starting route guidance" on page 43.) 2. Touch "My Places". 4. - 2007 Toyota Sienna | Navigation Manual - Page 21
BASIC FUNCTIONS 5. Enter the house number. 6. Enter the street name. Every touch on a letter key narrows the selection. Letters that cannot be selected in the database are dimmed out. When there are four or fewer database items, these items are - 2007 Toyota Sienna | Navigation Manual - Page 22
BASIC FUNCTIONS 8. Touch "Enter". Registration of home is complete and the "Memory Point" screen is displayed. Registered "Home" information will be displayed. The icon, quick access, name, location, and phone number can be changed. (See " - Editing memory points" on page 71.) 22 - 2007 Toyota Sienna | Navigation Manual - Page 23
search by "Previous" ...Destination search by "Map" ...Destination search by "Intersection" ...Destination search by "Freeway Ent./Exit" ...Destination search by "Coordinates" ...Destination search by "Phone #" ...Starting route guidance ... 23 - 2007 Toyota Sienna | Navigation Manual - Page 24
destination. (See pages 26 through 43.) INFORMATION When searching the destination, the response to the touch−screen button may be slow. 1. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. (For map database information and updates - 2007 Toyota Sienna | Navigation Manual - Page 25
DESTINATION SEARCH SELECTING THE SEARCH AREA ON THE INPUT SCREEN Change the search area in order to set a destination from a different area by using "Address", "POI Name", "Freeway Ent./Exit", or "Intersection". U.S.A. Button "US1" "US2" States - 2007 Toyota Sienna | Navigation Manual - Page 26
Destination search by Home "US8" "US9" Touch the home touch−screen button on the "Destination" screen. The screen changes and displays the map location for home and the route preference. (See "Starting route guidance" on page 43.) To use this function, it is necessary to set "Home" for the memory - 2007 Toyota Sienna | Navigation Manual - Page 27
name Touch any of the quick access touch− screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See "Starting route guidance" on page 43.) To use this function, it is necessary to set "Quick access" for - 2007 Toyota Sienna | Navigation Manual - Page 28
name. 3. When the desired street name is found, touch the corresponding touch−screen button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) If the same address exists in more than one city, the - 2007 Toyota Sienna | Navigation Manual - Page 29
DESTINATION SEARCH (b) Selecting a city to search If inputting a street name first, the screen changes. The house number can then be input. If the same address exists in more than one city, the current screen changes to the city list screen. Touch "City". If the above screen appears, an address - 2007 Toyota Sienna | Navigation Manual - Page 30
desired city name from the displayed list. "Map": To display the selected destination and the route preference. (See "Starting route guidance" on page 43.) The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on - 2007 Toyota Sienna | Navigation Manual - Page 31
a street name" on page 27.) Touch the touch−screen button of the desired city name. If the navigation has not be used, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street - 2007 Toyota Sienna | Navigation Manual - Page 32
(a) Selecting a city to search 3. Touch the touch−screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) When inputting the name of a specific Point of Interest, and - 2007 Toyota Sienna | Navigation Manual - Page 33
nearest 5 cities 3. Select from the last 5 cities 2. Input the city name. 2. Touch the touch−screen button of the desired city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch−screen button of the desired city - 2007 Toyota Sienna | Navigation Manual - Page 34
not on the screen, touch "List All Categories" to list all POI categories. Touch the touch−screen button of the desired city name. If the navigation has not be used, no cities will be displayed on the screen. Touch "Category". When the desired category is touched, the POI name list screen - 2007 Toyota Sienna | Navigation Manual - Page 35
"Enter". The search point is set and the "POI Category" screen will be displayed. Set the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set the search point via the map screen 4. Set the search point from any destination It is - 2007 Toyota Sienna | Navigation Manual - Page 36
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". SETTING THE SEARCH POINT FROM DESTINATIONS 1. - 2007 Toyota Sienna | Navigation Manual - Page 37
DESTINATION SEARCH D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. Select the desired POI categories. "List": If the desired POI categories have already been selected, a list of POI will be displayed from among the selected - 2007 Toyota Sienna | Navigation Manual - Page 38
touch−screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2007 Toyota Sienna | Navigation Manual - Page 39
Touch the touch−screen button of your desired memory point. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) The previous starting point and up to 100 previously set destinations are displayed on the - 2007 Toyota Sienna | Navigation Manual - Page 40
desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) INFORMATION Guidance starts if "Enter" is touched even while driving. However, the cursor - 2007 Toyota Sienna | Navigation Manual - Page 41
the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) Be sure to use the complete name - 2007 Toyota Sienna | Navigation Manual - Page 42
" screen. 4. Touch the touch−screen button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) "Input Name": An applicable list is displayed by touching this touch - 2007 Toyota Sienna | Navigation Manual - Page 43
". The system starts route search and displays recommended routes. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. "Route Preference": To change the route preference - 2007 Toyota Sienna | Navigation Manual - Page 44
point 3 Type of the route and the distance 4 Distance of the entire route 3. To start guidance, touch "Guide". "3 Routes": To select the desired route from three possible routes. (See page 46.) "Route": To change the route. (See pages 53 and 55.) 1 CAUTION Be sure to obey traffic regulations and - 2007 Toyota Sienna | Navigation Manual - Page 45
DESTINATION SEARCH D To change the route before starting guidance ROUTE PREFERENCE INFORMATION D Even if the incorrect. Upon reception of GPS signals, it is automatically corrected. 1. You can change route preference by touching "Route Preference". 2. Select desired route preferences by touching - 2007 Toyota Sienna | Navigation Manual - Page 46
road Freeway Ferry 2. Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended route. This route is indicated by an orange line. "Quick2": Alternative route. This route is indicated by a purple line. 46 - 2007 Toyota Sienna | Navigation Manual - Page 47
and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destination ...Setting route ...Search condition ...Detour setting ...Route preference ...Starting route from adjacent road ...Map view ...Display POI icons ...Route overview ...Route preview ...Route trace ... 47 - 2007 Toyota Sienna | Navigation Manual - Page 48
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some areas, the roads have not been completely - 2007 Toyota Sienna | Navigation Manual - Page 49
ROUTE GUIDANCE : : : To scroll for farther junctions or exits. To scroll for closer junctions or exits. To scroll for the closest three junctions or exits. D When approaching a freeway exit or junction When the vehicle approaches an entrance, exit, or junction, the guidance screen for the freeway - 2007 Toyota Sienna | Navigation Manual - Page 50
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching turn list. during guidance displays the ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. during guidance displays the - 2007 Toyota Sienna | Navigation Manual - Page 51
ROUTE GUIDANCE INFORMATION On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow time to maneuver. 4.2 miles 0.25 miles One−way road One−way road 1 "Proceed about 4 miles to the traffic circle - 2007 Toyota Sienna | Navigation Manual - Page 52
ROUTE GUIDANCE INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice guidance command, push the "MAP/VOICE" button to hear it again. D To adjust - 2007 Toyota Sienna | Navigation Manual - Page 53
ROUTE GUIDANCE To switch to estimated travel time. Setting and deleting destination - - Adding destinations Adding destinations and searching again for the routes can be done. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION 2. Touch - 2007 Toyota Sienna | Navigation Manual - Page 54
- Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 4. Touch the desired "Add" the destination button. Reordered number of arrival is displayed on the right side of the screen. Touching "Undo" will cancel each selected order - 2007 Toyota Sienna | Navigation Manual - Page 55
ROUTE GUIDANCE - Deleting destinations A set destination can be deleted. Setting route - - Search condition You can designate the route conditions of the route to the destination. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set, a list will be displayed on the screen. - 2007 Toyota Sienna | Navigation Manual - Page 56
. "Whole Route": By touching this touch− screen button, the system will calculate an entire new route to the destination. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 53 and 55.) 2. Touch "Detour". 56 - 2007 Toyota Sienna | Navigation Manual - Page 57
the route to the destination. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of road conditions. 2. Touch "Route Preference" to change the conditions which are to determine the route to the destination. 57 - 2007 Toyota Sienna | Navigation Manual - Page 58
route from adjacent road You can start the route guidance from the adjacent road. (ex. When You can also set their location as a destination and use them for route guidance. 2. Touch "Start from Adjacent Road". When there is no adjacent road, this button will not be displayed. 1. Touch "Map - 2007 Toyota Sienna | Navigation Manual - Page 59
system will list the points within 20 miles (32 km). (See page 60.) A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 84.) Select the desired POI categories. The selected category icon appears on the top left of the screen. By selecting - 2007 Toyota Sienna | Navigation Manual - Page 60
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2007 Toyota Sienna | Navigation Manual - Page 61
to set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the cursor . At this time, the distance route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 53 and 55.) "Turn List - 2007 Toyota Sienna | Navigation Manual - Page 62
name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to the starting point will be displayed with the mileage to the next turn. These marks indicate the direction in which you should turn - 2007 Toyota Sienna | Navigation Manual - Page 63
. : To preview the route to the next destination in fast−forward mode. : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to the previous destination or starting point in fast− forward mode. : To indicate the previous destination or - 2007 Toyota Sienna | Navigation Manual - Page 64
ROUTE GUIDANCE 64 - 2007 Toyota Sienna | Navigation Manual - Page 65
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use IV 66 67 67 69 70 71 75 75 76 76 77 79 80 80 Suspending and resuming guidance ...Volume ...User selection ...My places ...Registering memory points ...Editing memory points ...Deleting memory points ... - 2007 Toyota Sienna | Navigation Manual - Page 66
the current position map without route guidance. 2. Touch "Resume Guidance". 2. Touch "Suspend Guidance". INFORMATION Without route guidance, "Suspend Guidance" cannot be used. The screen will change to the current position map with route guidance. 66 - 2007 Toyota Sienna | Navigation Manual - Page 67
volume, select the desired level by touching the appropriate number. If voice guidance is unneeded, touch "OFF". The selected item is highlighted. INFORMATION 2. Touch "Volume". During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive - 2007 Toyota Sienna | Navigation Manual - Page 68
that is already registered is touched, the following screen appears. 2. Touch "Select User". 1. Touch "Memorize". The confirmation screen will be displayed. To replace, touch "Yes". To cancel the re. placement, touch "No" or 2. To register, touch "Yes". To return to . the previous screen, touch - 2007 Toyota Sienna | Navigation Manual - Page 69
ADVANCED FUNCTIONS D To change user D To delete user My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. ( - 2007 Toyota Sienna | Navigation Manual - Page 70
ADVANCED FUNCTIONS 8 9 10 Deletes previous points. (See " - Deleting previous points" on page 80.) Number of remaining memory points Number of remaining areas to avoid - Registering memory points On this screen, the following operations can be performed. 1 Registers memory points. (See " - - 2007 Toyota Sienna | Navigation Manual - Page 71
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 3. Touch "OK". To edit registered information, see " - Editing memory points" on page 71. INFORMATION Up to 106 memory points can be registered. 1. - 2007 Toyota Sienna | Navigation Manual - Page 72
"Memory Point" screen. SOUND ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. 2. Touch the desired icon. Turn the page by touching "Page 1", "Page 2" or "with Sound". Touch either or to adjust the direction - 2007 Toyota Sienna | Navigation Manual - Page 73
"Quick Access" It is possible to change attributes of the quick access points. Memory points with a . 2. Touch the desired attribute. It is possible to replace a registered attribute. DELETING "Quick Access" 1. Touch "Del.". 3. To replace the attribute, touch "Yes". To return to the previous - 2007 Toyota Sienna | Navigation Manual - Page 74
NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. To show - 2007 Toyota Sienna | Navigation Manual - Page 75
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point - Destination search by Home" on page 26.) 1. Touch "Delete". 2. Enter the number using numeral keys. 3. Touch "OK". The previous screen will be displayed. 1. Touch "Register". 2. Touch the touch− - 2007 Toyota Sienna | Navigation Manual - Page 76
ADVANCED FUNCTIONS - Deleting home - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 2. Enter the location in the same way as for a destination search. (See "Destination search" on page 24.) When - 2007 Toyota Sienna | Navigation Manual - Page 77
to avoid The name, location and/or area size of a registered area can be edited. 3. Set the cursor in the center of the area to avoid, and touch "Enter". 1. Touch "Edit". 4. Touch either or to change the size of the area to be avoided. 5. Touch "OK". 2. Touch the desired area button. 77 - 2007 Toyota Sienna | Navigation Manual - Page 78
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid feature touch "OFF" on the "Edit Area to Avoid" screen. 4. Touch "OK". 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. To show the name - 2007 Toyota Sienna | Navigation Manual - Page 79
− screen button to move the cursor to the desired point on the map. 3. Touch "Enter". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 2. Touch the touch−screen button to be deleted. "Delete - 2007 Toyota Sienna | Navigation Manual - Page 80
ADVANCED FUNCTIONS - Deleting previous points The previous destination can be deleted. Setup Setting the items shown on the "Setup" screen can be done. (See page ix.) 1. Push the "MENU" button. 3. To delete the point, touch "Yes". To cancel the deletion, touch "No". 1. Touch "Delete Previous - 2007 Toyota Sienna | Navigation Manual - Page 81
ADVANCED FUNCTIONS D Distance unit Distance unit can be changed. 1. Touch "Setup" on the "Menu" screen. D Estimated travel time The speed that is used for the calculation of the estimated travel time and the estimated - 2007 Toyota Sienna | Navigation Manual - Page 82
road conditions such as traffic jams, and construction work. D It is possible to display up to 99 hours 59 minutes. D Input key layout Key layout can be changed. 1. Touch "Setup" on the "Menu" screen. 3. Touch or to set the average vehicle speeds for "Residential", "Main street", and "Freeway". To - 2007 Toyota Sienna | Navigation Manual - Page 83
ADVANCED FUNCTIONS LAYOUT TYPE D Time zone Time zone can be changed. 1. Touch "Setup" on the "Menu" screen. " "ABC" type 2. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. 3. Touch the desired time zone. The selected button is highlighted. "Daylight - 2007 Toyota Sienna | Navigation Manual - Page 84
ADVANCED FUNCTIONS D Screen layout function ( Function) D POI category change (Display POI Icons) Select from among the 6 icons displayed on the " be displayed or hidden. 1. Touch "Setup" on the "Menu" screen. 2. Touch "Change" of " Function". 2. Touch "Change" of "Display POI Icons". 84 - 2007 Toyota Sienna | Navigation Manual - Page 85
turn the "Display Building Shapes" on: 1. Touch "Setup" on the "Menu" screen. Then touch up" screen. 3. Touch the category button to be changed. to display page 2 of the "Set- D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of - 2007 Toyota Sienna | Navigation Manual - Page 86
ADVANCED FUNCTIONS D Voice recognition guidance When the "Voice Recognition Guidance" feature is turned on, the voice recognition guidance can be heard automatically. To turn the "Voice Recognition Guidance" on: 1. Touch "Setup" on the "Menu" screen. Then touch up" screen. to display page 2 of the - 2007 Toyota Sienna | Navigation Manual - Page 87
−up Message" is turned off, following messages are not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Touch "Setup" on the "Menu" screen. Then touch - 2007 Toyota Sienna | Navigation Manual - Page 88
GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 3. Touch the desired touch−screen on the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 202. 1. Touch "Position/Direction". 4. Touch either - 2007 Toyota Sienna | Navigation Manual - Page 89
not performed when tires are replaced, the current vehicle position mark may be incorrectly displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later - 2007 Toyota Sienna | Navigation Manual - Page 90
ADVANCED FUNCTIONS 90 - 2007 Toyota Sienna | Navigation Manual - Page 91
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions V Maintenance informationon ...92 Maintenance information setting ...92 Dealer setting ...93 Calendar with memo ...95 Adding a memo ...96 Editing a memo ...98 Memo list ...98 Hands−free system ...99 Speech command system ...142 Help screen - 2007 Toyota Sienna | Navigation Manual - Page 92
engine oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF "SERVICE": Scheduled maintenance "AIR FILTER": Replace air - 2007 Toyota Sienna | Navigation Manual - Page 93
information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions can be input. Notice of "Distance": The driving distance until the next maintenance check can be input. "Delete": To cancel the date and distance conditions. " - 2007 Toyota Sienna | Navigation Manual - Page 94
delete the dealer information displayed on the screen. "Enter ": To set the displayed dealer as a destination. (See "Starting route guidance" on page 43.) 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 2. Touch - 2007 Toyota Sienna | Navigation Manual - Page 95
On this screen, the current date is highlighted in yellow. or 2. Enter the number using numeral keys. 3. Touch "OK". The previous screen will be displayed. 2. Touch "Calendar". or : To change month. : To change year. "Today": To display the current month calendar (if another month will be displayed - 2007 Toyota Sienna | Navigation Manual - Page 96
color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 3.) 1. Touch the date you want to - 2007 Toyota Sienna | Navigation Manual - Page 97
OTHER FUNCTIONS 3. Touch "Memo". 4. Enter text using the keys. Up to 24 letters can be entered. After entering the text, touch "OK" at the bottom right of the screen. 5. When registering information on the - 2007 Toyota Sienna | Navigation Manual - Page 98
. "Memo": To edit a memo. (See " - Adding a memo" on page 96.) "Location": To change a registered location. (See " - Adding a memo" on page 96.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page 43.) "Delete": To delete the memo. 2. Touch the desired - 2007 Toyota Sienna | Navigation Manual - Page 99
taking your hands off the steering wheel by connecting your cellular phone. This system supports Bluetoothr. Bluetoothr is a wireless data cancel the deletion, touch "No". CAUTION 2. Enter the period using the numeral keys. The period from January 1, 2005 through December 31, 2024 can be set - 2007 Toyota Sienna | Navigation Manual - Page 100
on the phone. The other party's voice outputs from the driver's speaker. When the received calls or received voice outputs, the audio from the Audio system or voice guidance from the Navigation system will be muted. INFORMATION D Talk alternately with the other party on the phone. If you talk at - 2007 Toyota Sienna | Navigation Manual - Page 101
on the place where "Blue" indication is displayed. : no connection to Bluetoothr. Indicates the amount of battery charge left. Bluetooth is a trademark owned by Bluetooth SIG, Inc. V Empty Full It is not displayed while the Bluetoothr is connecting or the phone book data is being transferred - 2007 Toyota Sienna | Navigation Manual - Page 102
book data D Dialed numbers and received calls D Speed dial D Bluetoothr phone data D Security code FCC ID: HYQDNNS016 IC ID: 1551A−DNNS016 MADE IN JAPAN This device complies with Part following measures: −Reorient or relocate the receiving antenna. −Increase the separation between the equipment and - 2007 Toyota Sienna | Navigation Manual - Page 103
very low levels of RF radiator and person's body (excluding extremities: hands with any other antenna or transmitter. (a) wheel to display this screen when the vehicle is stopped. 4. Touch "Bluetooth∗" to display the "Bluetooth∗ Settings" screen. ∗: Bluetooth is a registered trademark of Bluetooth - 2007 Toyota Sienna | Navigation Manual - Page 104
or off. 6. When this screen is displayed, input the Passkey displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2007 Toyota Sienna | Navigation Manual - Page 105
When the auto connection fails or is turned off, you have to connect Bluetoothr manually. When the ignition switch is set at ACC or ON, the selected Bluetoothr phone will be automatically connected and the connection result is displayed. This - 2007 Toyota Sienna | Navigation Manual - Page 106
an inputted digit is deleted. When you touch last is inputted. or push the Touch ing wheel. , the number you called switch of the steer- Touch the desired key to input the telephone number. 1. Touch "Phone Book" to display "Phone Book" screen. Touch or push the ing wheel. switch of the steer- 106 - 2007 Toyota Sienna | Navigation Manual - Page 107
is deleted. This cannot be operated while driving. D When you call by phone book, the name (if registered) is displayed. D When you call the same number continuously screen. V Touch or push the ing wheel. switch of the steer2. Touch "Incoming Calls" to display "Incoming Calls" screen. - 2007 Toyota Sienna | Navigation Manual - Page 108
are also memorized in the system and "Abs." is displayed on the left side of the number. D Unnoticed telephone number such as a public telephone is not memorized in the system. Touch or push the switch of the steering wheel. D An international phone call may not be made depending on the cellular - 2007 Toyota Sienna | Navigation Manual - Page 109
name You can call by giving a voice tag registered in the phone book. For setting the voice recognition, see "Setting the voice recognition" on page 126. Example: Call Charlize 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3". When you push - 2007 Toyota Sienna | Navigation Manual - Page 110
. D Keep on pushing the talk switch D Push the switch of the steering wheel. D Touch "Cancel". (Except for recognizing the command) D Say "Cancel" 6 entries can be displayed including the first searched one. Do the following to change the entry to the next one. D Touch "Next" D Push the talk - 2007 Toyota Sienna | Navigation Manual - Page 111
or No." You: "Yes." System: "Sending." Now you are sending the tone. You can call by touching when it is displayed on the screen from Navigation system. (See page 11 for details.) V 111 - 2007 Toyota Sienna | Navigation Manual - Page 112
the Bluetoothr phone You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to manual that comes with your cellular phone. When a call is received, this screen is disor push played with a sound. Touch the switch of the steering wheel - 2007 Toyota Sienna | Navigation Manual - Page 113
for example. You can register the phone number and the code number in the phone book. Touch the desired number to input the key. To hang up the phone: or push the switch of the Touch steering wheel. This cannot be operated while driving. If the continuous tone signal is registered in a phone - 2007 Toyota Sienna | Navigation Manual - Page 114
tone. (For registering the speed tone, see "Registering the speed tone" on page 117.) (e) Change the settings of the Bluetoothr phone (i) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be - 2007 Toyota Sienna | Navigation Manual - Page 115
OTHER FUNCTIONS 2. Touch "Register" of "Speed Dial". 4. Touch the desired telephone number. 6. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to overwrite it. V 3. Select the data you want to register. 5. Touch the touch−screen - 2007 Toyota Sienna | Navigation Manual - Page 116
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. D Deleting all of the speed dial 2. Touch the touch−screen button you want to delete. 1. Touch "Delete All" of "Speed - 2007 Toyota Sienna | Navigation Manual - Page 117
OTHER FUNCTIONS (ii) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 3. Input the number and touch "OK". 5. If you select a touch−screen button you register before, this screen is displayed. Touch "Yes" if you want to overwrite it - 2007 Toyota Sienna | Navigation Manual - Page 118
OTHER FUNCTIONS D Editing the speed tone. You can edit the speed tone. 3. Use the software keyboard to input the name. 1. Touch "Edit" of "Speed Tone". 4. Input the number and touch "OK". 2. Touch the touch−screen button you want to edit. 118 - 2007 Toyota Sienna | Navigation Manual - Page 119
OTHER FUNCTIONS D Deleting the speed tone individually. You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. D Deleting all the speed tone 3. Touch "Yes". 1. Touch "Delete All" of "Speed Tone". 1. Touch "Delete" of "Speed Tone". V 2. Touch - 2007 Toyota Sienna | Navigation Manual - Page 120
OTHER FUNCTIONS (iii) Setting the volume D Automatic volume settings for high speed You can set the volume one step up when the speed is over 80 km/h. (When it is under 70 km/h, previous volume is back.) Each time you touch "Adaptive Volume Control", you can switch on or off. D Initializing the - 2007 Toyota Sienna | Navigation Manual - Page 121
answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) it on the screen. Icon mode ...The message is displayed on the upper side of the screen. You can only operate the steering switch. 2. Do the - 2007 Toyota Sienna | Navigation Manual - Page 122
automatically connected, the connection check is displayed. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. Touch "Yes". Touch "ON" or "OFF" of "Show Bluetooth∗ connection status at start up". ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. You can - 2007 Toyota Sienna | Navigation Manual - Page 123
Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. 2. Select the group you want to transfer to. 4. Transfer the phone book data to the system using the Bluetoothr phone. This screen appears while transferring. To cancel - 2007 Toyota Sienna | Navigation Manual - Page 124
FUNCTIONS D Registering the phone book data You can register the phone book data. When this screen is displayed, try the transfer operation again. 1. Touch "Register" of "Phone Book". 3. When you complete the edit, touch "OK". 2. Touch the desired touch−screen button to edit the phone book. 124 - 2007 Toyota Sienna | Navigation Manual - Page 125
OTHER FUNCTIONS D Editing the name When you don't input the name, the number is displayed. D Editing the phone number You can register the phone number in "TEL1" and "TEL 2" separately. Up to 2 numbers a person can be registered. 3. Select the desired icon. 1. Touch "Name". 1. Touch "TEL 1" or " - 2007 Toyota Sienna | Navigation Manual - Page 126
OTHER FUNCTIONS D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find this contact when needed, by using the group display. You can select "No group" or "Group 01" to "Group 19". "No group" is displayed if you - 2007 Toyota Sienna | Navigation Manual - Page 127
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. 3. Touch "PLAY" to play the voicetag. If you want to delete it, touch "Delete" and "OK". 3. Confirm the added data on the screen and touch " - 2007 Toyota Sienna | Navigation Manual - Page 128
all your data on the system. 1. Touch "Edit". 3. Touch the desired touch−screen button. When you edit the data, touch "OK". 1. Touch "Delete" of "Phone Book". 2. Select the data you want to edit. When you also touch "Edit" on this screen, you can edit it. 2. Touch the desired touch−screen button - 2007 Toyota Sienna | Navigation Manual - Page 129
OTHER FUNCTIONS 3. Touch "Yes". You can also delete it in the following way. 2. Select the desired data. 4. Touch "Yes". V 3. Touch "Delete". 1. Touch "Phone Book". 129 - 2007 Toyota Sienna | Navigation Manual - Page 130
Select Group" screen is displayed. You can also delete it in the following way. 1. Touch "Delete All" of "Phone Book". 4. Select the desired group. 1. Touch "Phone Book". 2. Select the deleting method. Group Data ...Deleting all the phone data in group. All Contact Data ...Deleting all the phone - 2007 Toyota Sienna | Navigation Manual - Page 131
OTHER FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" is registered by default. You can change "Group 01" − "Group 19" into desired names. 3. Touch "Yes". 2. Select the group you want to register. 1. Touch "Register" of "Group Name". V 3. - 2007 Toyota Sienna | Navigation Manual - Page 132
OTHER FUNCTIONS D Selecting a group icon D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting. (excluding "No Group") 1. Touch "Icon". 1. Touch "Name". 1. Touch " - 2007 Toyota Sienna | Navigation Manual - Page 133
OTHER FUNCTIONS D Deleting all the group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. (a) Individually 2. Select the group you want to delete the name of. 1. Touch "Delete All" of "Group Name". - 2007 Toyota Sienna | Navigation Manual - Page 134
the security, you have to input the security code. Be sure to change the default code when you use the security for the first time. 1. Touch " the navigation system, etc. will be deleted. (See "D Initializing the security code" on page 136.) 2. Touch "Yes". 1. Touch "Phone Book Lock". 134 - 2007 Toyota Sienna | Navigation Manual - Page 135
OTHER FUNCTIONS 2. Touch "Change". 4. Input a new code. D Phone Book Lock When you set the phone book lock, you can have the following functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book data. D Display of speed dial screen, - 2007 Toyota Sienna | Navigation Manual - Page 136
OTHER FUNCTIONS D Initializing the security code You can initialize the settings. 1. Touch "ON". 1. Touch "Default". 3. Touch "Yes". 2. Input the security code and touch "OK". 2. Input the security code and touch "OK". 136 - 2007 Toyota Sienna | Navigation Manual - Page 137
OTHER FUNCTIONS (f) Set a Bluetoothr phone D Selecting a Bluetoothr phone In case you register more than one Bluetoothr phone, you need to choose a favorite one. 2. Touch "Select Telephone" to display "Select Telephone" screen. You can select the Bluetoothr phone from a maximum of 6 numbers. " - 2007 Toyota Sienna | Navigation Manual - Page 138
...The name of Bluetoothr phone which is displayed on the screen. You can change it into a desired name. Bluetooth∗ Device Address ...The address peculiar to the system. You cannot change it. 2. Touch "Change". Touch "Yes" or "No". 3. When you complete the setting, touch 1. Select the desired - 2007 Toyota Sienna | Navigation Manual - Page 139
it. Passkey ...The password when you register your cellular phone in the system. You can change it into the figure of 4−8 digits. Bluetooth∗ Device Address ...The address peculiar to the system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or Passkey - 2007 Toyota Sienna | Navigation Manual - Page 140
OTHER FUNCTIONS D Initializing the Bluetoothr settings. You can initialize the settings. 3. Use the software keyboard to input the Device Name. You can input up to 20 characters. 5. When you complete the setting, touch . 1. Touch "Default". 4. Input a Passkey with 4 − 8 digits. When you touch A, - 2007 Toyota Sienna | Navigation Manual - Page 141
phone before you delete it and you can make sure whether the telephone you delete is correct or not. 3. Touch "Yes". 1. Touch "Delete" of phone". "Bluetooth∗ Tele- 1. Select the telephone you want to display the information about. V 2. Select the telephone you want to delete and touch "OK - 2007 Toyota Sienna | Navigation Manual - Page 142
the indicator is shown on the display. If you want to check the command list, touch "Help" to display the help screen. you touch "Cancel", the previous screen returns. If the navigation system does not respond or the confirmation screen does not disappear Start the operation from the beginning. 142 - 2007 Toyota Sienna | Navigation Manual - Page 143
, you will hear "Home is not registered". 4. Touch "Enter" or say "Enter destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add" or "Replace" is displayed on the screen.) Touch or say "Cancel", and the search will be canceled. When you - 2007 Toyota Sienna | Navigation Manual - Page 144
noises such as wind noise, etc. 1. Touch the "Command List" tab on the upper side of the screen and the touch− screen buttons on the right side "OK" after you check it. 1. Touch the "Operating Guide" tab on the upper side of the screen and the touch−screen buttons on the right side of the screen to - 2007 Toyota Sienna | Navigation Manual - Page 145
tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video and video CD are being played. "Color" "R": Strengthens the red color of the screen. "Color" "G": Strengthens the green color of the screen. "Tone" "+": Strengthens the tone of the screen - 2007 Toyota Sienna | Navigation Manual - Page 146
seconds, the previous screen will be displayed. Depending on the position of the headlight switch, the screen changes to either day mode or night mode. To display the screen in the day mode even with the is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 146 - 2007 Toyota Sienna | Navigation Manual - Page 147
to the navigation screen from the audio screen. (b) Switch color You can select a color of touch−screen buttons. (c) Rear system lock (with rear can be locked to prevent rear passengers from operating the entertainment system. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen - 2007 Toyota Sienna | Navigation Manual - Page 148
D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings D Phone book data D Dialed numbers and received calls D Speed dial D Bluetoothr phone data D Security code This function is available only when - 2007 Toyota Sienna | Navigation Manual - Page 149
You can turn the beep sound off. Select language The language of the touch−screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. Touch "Beep Off". "Beep Off" is highlighted. To set the beep sound on, touch "Beep Off" again. 2. Touch "Language". 3. Touch - 2007 Toyota Sienna | Navigation Manual - Page 150
OTHER FUNCTIONS 150 - 2007 Toyota Sienna | Navigation Manual - Page 151
AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/video system VI Quick reference ...152 Using your audio/video system ...153 Audio/video system operating hints ...194 VI 151 - 2007 Toyota Sienna | Navigation Manual - Page 152
5 6 Function menu display screen To control the radio, CD changer or DVD player, touch the touch−screen buttons. For details, see page 154. "TUNE pages 154 and 157. "DISC·AUX" button Push this button to turn the CD changer, DVD player and AUX on. For details, see pages 154, 157, 168 and 177. "SCAN" - 2007 Toyota Sienna | Navigation Manual - Page 153
to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you - 2007 Toyota Sienna | Navigation Manual - Page 154
AUDIO/VIDEO SYSTEM (a) Turning the system on and off "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display touch− screen buttons for audio system (audio control mode). You - 2007 Toyota Sienna | Navigation Manual - Page 155
DVD player operation are displayed on the function touch−screen button display screen when the audio control mode is selected. Touch them lightly front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance - 2007 Toyota Sienna | Navigation Manual - Page 156
adjusts to the optimum volume according to the noise level. Select "ON" of "ASL" and touch "OK". Touching "WIDE" displayed on the screen in the video control mode will display the wide mode control screen. "NORMAL": Displays a 3 4 screen, with either side in black. "WIDE 1": Widens the 3 4 screen - 2007 Toyota Sienna | Navigation Manual - Page 157
AUX mode. For details, refer to the "Owner's Manual". - Radio operation NOTICE D Do not stack up two discs for insertion, or it will cause damage to the changer. Insert only one disc into slot at a time. D Never try to disassemble or oil any part of the changer. Do not insert anything other than - 2007 Toyota Sienna | Navigation Manual - Page 158
prevent the weak signal from creating noise. If the signal becomes extremely up to 6 stations. To change the preset station to a different one, power source is interrupted by battery disconnection or a blown fuse. the "SEEK/TRACK" button on either side. The radio will begin seeking up or - 2007 Toyota Sienna | Navigation Manual - Page 159
on the display. Each time you touch "TYPE A" or "TYPE "", the program type changes as in the following: D ROCK D MISC (Miscellaneous) D INFORM (Information) D ) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D RELIGION D ALARM (Emergency message) "TYPE SEEK" When a program is set - 2007 Toyota Sienna | Navigation Manual - Page 160
genuine Toyota satellite receiver and antenna must be purchased and installed, Additional activation and service subscription fees MSG" or "MSG OFF", indication on the display changes from the band to the station name, a radio the display and the radio will start seeking any traffic program station. - 2007 Toyota Sienna | Navigation Manual - Page 161
the responsibility of the XMr satellite radio and are subject to change. Satellite tuner technology notice: Toyota's satellite radio tuners are a unique radio ID. You will need the radio ID when activating XMr service or when reporting a problem. If you select the "CH 000" using the "TUNE" knob, the - 2007 Toyota Sienna | Navigation Manual - Page 162
button and the name and number of the channel appears on the touch−screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power source is interrupted by - 2007 Toyota Sienna | Navigation Manual - Page 163
AUDIO/VIDEO SYSTEM D Displaying the title and name To scan the currently selected channel category: Touch "TYPE SCAN" or push the "SCAN" button briefly. "SCAN" appears on the display. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan - 2007 Toyota Sienna | Navigation Manual - Page 164
about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. UPDATING NO SIGNAL LOADING OFF AIR The XMr Listener Care Center is also available on the phone, please call (800) 967−2346 during the following hours: Monday - 2007 Toyota Sienna | Navigation Manual - Page 165
pursuant to Part 15 of instructions, or relocate the receiving antenna. - Increase the Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. - CD changer operation INFORMATION This XMr tuner supports "Audio Services - 2007 Toyota Sienna | Navigation Manual - Page 166
side of the slot start blinking. When the indicators change to green, insert only one disc. After the disc is loaded, the amber indicators at either side of the slot start blinking again. When the indicators change injure people in the vehicle during sudden braking or in an accident. D To reduce - 2007 Toyota Sienna | Navigation Manual - Page 167
canceled. When all the discs are removed, the amber indicators change to green. A disc can be inserted. 1. Push the "LOAD· " button. "LOAD·EJECT" screen appears. The 2. Touch "ALL CD ". The display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected - 2007 Toyota Sienna | Navigation Manual - Page 168
SYSTEM Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC·AUX" button "CD CHANGER" appears on the screen. The discs set in the changer are played continuously, starting with the last disc you inserted. The disc number of the disc currently being played, the - 2007 Toyota Sienna | Navigation Manual - Page 169
TRACK" button: Use for a direct access to a desired track. Push either side of the "SEEK/TRACK" button and repeat it until the desired track number appears on the screen. As you release the button, the changer will start playing the selected track from the beginning. "TRACK LIST": The desired - 2007 Toyota Sienna | Navigation Manual - Page 170
changer will resume playing. Touch the desired track number. The changer will start playing the selected track from the beginning. : By touching this touch rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the "SEEK/TRACK" - 2007 Toyota Sienna | Navigation Manual - Page 171
AUDIO/VIDEO SYSTEM Searching for a desired disc - Touch "SCAN" on the screen or push the "SCAN" button for longer than a second while the disc is playing. "D·SCAN" appears on the screen. The program at the beginning of each audio disc will be played for 10 seconds. To continue listening to the - 2007 Toyota Sienna | Navigation Manual - Page 172
the file currently playing is displayed. This function is available only when the vehicle is not moving. Touch the desired folder number. The changer will start playing the first file of the selected folder. : By touching this touch−screen button, the list moves up by 6 folder groups. If this touch - 2007 Toyota Sienna | Navigation Manual - Page 173
"SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until the desired file number appears on the display. As you release the button, the changer will start playing the selected file from the beginning. When "RAND" or "FLD·RPT" is - 2007 Toyota Sienna | Navigation Manual - Page 174
AUDIO/VIDEO SYSTEM Touch the desired file number. The changer will start playing the selected file from the beginning. : By touching this touch−screen button, the list moves up by 6 file groups. If this touch−screen button - 2007 Toyota Sienna | Navigation Manual - Page 175
player malfunctions If "CD ERROR" appears on the screen, audio signals of the disc cannot be read or the system has trouble. Push the "DISC" button once again. If the changer does not operate, check Remove the disc from the changer to cool it. If the changer still does not operate, have it checked - 2007 Toyota Sienna | Navigation Manual - Page 176
. Insert the disc into the slot with the label side up. An adapter must be used for 8 cm (3 in.) discs which are loaded in the same manner as for 12 cm (4.7 in.) discs. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the - 2007 Toyota Sienna | Navigation Manual - Page 177
in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating side of the "SEEK/TRACK" button and repeat it until the desired track number appears on the display. As you release the button, the player will start - 2007 Toyota Sienna | Navigation Manual - Page 178
AUDIO/VIDEO SYSTEM Reverse: Touch "Ɲ" side of the "SEEK/ TRACK" button and hold it to reverse the disc. When you release the button, the player will resume playing. Touch the desired track number. The player will start playing the selected track from the beginning. : By touching this touch−screen - 2007 Toyota Sienna | Navigation Manual - Page 179
listening to. Touch "RPT" while the track is playing. When the track is finished, the player will automatically go back to the beginning of the track and play the track again. To cancel VI Touch the desired folder number. The player will start playing the first file of the selected folder. 179 - 2007 Toyota Sienna | Navigation Manual - Page 180
" button and repeat it until the desired file number appears on the display. As you release the button, the player will start playing the selected file from the beginning. Fast forward: Push "Ɯ" side of the "SEEK/ TRACK" button and hold it to fast forward the disc. When you release the button, the - 2007 Toyota Sienna | Navigation Manual - Page 181
VIDEO SYSTEM Touch the desired file number. The player will start playing the selected file from the beginning. : " on the screen or push the "SCAN" button briefly. "SCAN" appears on the screen. The DVD player will play the next file in the folder for 10 seconds, then scan again. To select a file - 2007 Toyota Sienna | Navigation Manual - Page 182
not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For the detailed information about DVD video discs, see "(h) DVD player and DVD video disc information". Precautions on DVD video disc When recording with a DVD video or video CD, audio tracks may - 2007 Toyota Sienna | Navigation Manual - Page 183
volume assuming that the conversations represent the maximum volume level that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. The louder sounds may have a significant impact on the human body or pose a driving hazard. Keep this in mind - 2007 Toyota Sienna | Navigation Manual - Page 184
the predetermined scene and start playing from there. "AUDIO": The audio changing screen appears. (See page 186.) "Subtitle": The subtitle changing screen appears. (See page 185.) "Angle": The angle selection screen appears. (See page 186.) DISPLAYING DVD CONTROLS If you touch a part of the screen - 2007 Toyota Sienna | Navigation Manual - Page 185
touch "Enter". The player starts playing video for that menu item. (For details, see the manual that comes with the DVD video disc provided separately the title number and touch "Enter". The player starts playing video for that title number. When you push either side of the "SEEK/ TRACK" button, you - 2007 Toyota Sienna | Navigation Manual - Page 186
THE AUDIO LANGUAGE Each time you touch "AUDIO", the language is selected from the ones stored in the discs and changed. When you touch returns. , the previous screen CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the angle mark appears on the screen - 2007 Toyota Sienna | Navigation Manual - Page 187
. the D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4− level (1 - 8) on the "Select Restriction Level". Touch the switch to return to the "Setup Menu" screen. D DVD language You can change the language on the DVD video menu. 1. Touch "DVD - 2007 Toyota Sienna | Navigation Manual - Page 188
Finnish Fiji Faroese Frisian Irish Scots−Gaelic Galician If you touch "Others" on the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the language you want to hear or read by entering a language code. 1. Enter the 4−digit language code. If - 2007 Toyota Sienna | Navigation Manual - Page 189
AUDIO/VIDEO SYSTEM 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian - 2007 Toyota Sienna | Navigation Manual - Page 190
setup menu. If you want to cancel the setup operation from the rear seat, touch "Play". The player will resume normal play. Under the same condition, the rear passenger can cancel the setup operation from the front seat. To lock the operation of the player from the rear seat, see "(c) Rear system - 2007 Toyota Sienna | Navigation Manual - Page 191
appears on the screen. If you touch this while the player is playing video, the previous track is searched and played. changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING VIDEO CD CONTROLS If you touch the part - 2007 Toyota Sienna | Navigation Manual - Page 192
display: It indicates that the DVD region code is not set properly. If "DVD ERROR" appears on the display: It indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove the disc from the player and allow the player to cool down. If the malfunction - 2007 Toyota Sienna | Navigation Manual - Page 193
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating a country where - 2007 Toyota Sienna | Navigation Manual - Page 194
DVD player, you cannot play the disc on the DVD player. For region codes, see page 193. Audio: This DVD player can play liner PCM, Dolby digital and MPEG audio format DVD. Other decoded type cannot be played. Title and chapter: Video and audio programs stored in DVD video disc are divided in parts - 2007 Toyota Sienna | Navigation Manual - Page 195
conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your electrical noise, such as high tension power lines, lightening, or electrical motors. This results in static. CARING FOR YOUR CD CHANGER, DVD PLAYER - 2007 Toyota Sienna | Navigation Manual - Page 196
CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM DVD player D Use only discs marked as shown above. The following products may not be playable on your player. SACD Copy−protected CD CD−ROM DVD−R DVD+R DVD−RW DVD+RW DVD−ROM DVD−RAM " Special shaped discs " Transparent/translucent discs 196 - 2007 Toyota Sienna | Navigation Manual - Page 197
fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store - 2007 Toyota Sienna | Navigation Manual - Page 198
a straight line from the center to the edge of the level 2 and with the Romeo and Joliet file system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise - 2007 Toyota Sienna | Navigation Manual - Page 199
check folders that do not include MP3/WMA files. MP3/WMA files in folders up to 8 levels deep can be played. However, the start of playback may be delayed when using discs containing numerous levels insert a CD−RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional - 2007 Toyota Sienna | Navigation Manual - Page 200
format- This is the international standard for the formatting of CD−ROM folders and files. For the ISO 9660 format, there are two levels of regulations. Level 1: The file name is in 8.3 format (8 character file names, with a 3 character file extension. File names must be composed of one−byte capital - 2007 Toyota Sienna | Navigation Manual - Page 201
APPENDIX SECTION APPENDIX Appendix VII Limitations of the navigation system ...202 Map database information and updates ...204 VII 201 - 2007 Toyota Sienna | Navigation Manual - Page 202
3 to 4 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most of the time, occasional buildings, trucks, or even the placement of objects on the instrument panel may obstruct the GPS signals. The GPS satellites may not send signals - 2007 Toyota Sienna | Navigation Manual - Page 203
. D When driving with tire chains installed. D When the tires are worn. D After replacing a tire or tires. D When using tires that are smaller or larger the current position manually. For information on setting the current position calibration, see "D Current position/tire change calibration" on - 2007 Toyota Sienna | Navigation Manual - Page 204
the latest version. After replacing the tire, implement the operation described in the "D Current position/tire change calibration". (See page 87.) This navigation system uses tire turning data and is designed to work with factory−specified tires for your vehicle. Installing tires that are larger or - 2007 Toyota Sienna | Navigation Manual - Page 205
Data together with the navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service bureau, time−sharing or PDAs. Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources - 2007 Toyota Sienna | Navigation Manual - Page 206
or damages limitations, so to that extent the above may not apply to you. Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export - 2007 Toyota Sienna | Navigation Manual - Page 207
alternative rights in the Data. END USER LICENSE AGREEMENT PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE NAVIGATION Agreement. You shall not alter, obscure or remove any copyright notices, trademark notices or other publish any part of the DATABASE without the prior written consent of TANA - 2007 Toyota Sienna | Navigation Manual - Page 208
of the DATABASE, nor reproduce, copy, duplicate, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You YOUR USE OF THE DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE LIKE, - 2007 Toyota Sienna | Navigation Manual - Page 209
, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time. U.S. GOVERNMENT RIGHTS If you are an agency, department, or other entity of the United States Government, or funded in whole or in part by the United States Government, then use, duplication - 2007 Toyota Sienna | Navigation Manual - Page 210
CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. nor reproduce, copy, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the POI Data. 3. TRANSFER You may not transfer - 2007 Toyota Sienna | Navigation Manual - Page 211
for service bureau, time−sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble or reverse engineer vehicles, capable of vehicle navigation, positioning, dispatch, real - 2007 Toyota Sienna | Navigation Manual - Page 212
in death), demand, action, cost, expense, or claim of any of area, primarily around metropolitan centers, detailed route guidance is available but route guidance is limited. The navigation route might lack precision because the data and their locations are often changed. In some places, construction - 2007 Toyota Sienna | Navigation Manual - Page 213
display, as such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident. D To reduce the chance of injury in the case of an while it is moving. It could damage your navigation system. 3. Insert the new map DVD−ROM with the label side up. VII 213 - 2007 Toyota Sienna | Navigation Manual - Page 214
"Covered Area". Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. 2. Touch "Map DVD". Make sure the version of the database on this screen. (The database version on the screen above may be different from the actual screen.) 214 - 2007 Toyota Sienna | Navigation Manual - Page 215
turn in approaching a fork or intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down. Please be aware that all current vehicle navigation systems have certain limitations that may affect - 2007 Toyota Sienna | Navigation Manual - Page 216
and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch−screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done. CAUTION This is a warning against anything which - 2007 Toyota Sienna | Navigation Manual - Page 217
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2007 Toyota Sienna | Navigation Manual - Page 218
Touch this touch−screen button to register the current position or the cursor position as a memory point...10 6 "Route" Touch this touch−screen button to change the route...53, 55 7 "Map View" Touch this touch−screen button to browse information about guidance route, to set the Points of Interest to - 2007 Toyota Sienna | Navigation Manual - Page 219
Push this button to repeat a voice guidance, cancel one touch scroll, start guidance, and display the current position...9, 10, 52 13 "DEST" 24 14 Screen configuration touch−screen button Touch this touch−screen button to change the screen mode...13 8 "MENU" button Push this button to display - 2007 Toyota Sienna | Navigation Manual - Page 220
street address can be input by using the input keys...27 2 "POI Name" Select one of the the last 100 previously set destinations and from the previous starting point...39 5 "Memory" The location can be the four categories of emergency service points that are already stored in the system's database can - 2007 Toyota Sienna | Navigation Manual - Page 221
freeway (interstate) entrance or exit can be entered...41 10 "?" Function help for the "Destination" screen can be viewed on this screen...8 11 "Change" To change the search area, touch this touch−screen button...24 12 Quick access touch−screen buttons One of 5 preset destinations can be selected by - 2007 Toyota Sienna | Navigation Manual - Page 222
this screen...8 5 "Map DVD" Displays information regarding the disc version or covered area...214 6 "Select User" Up to 3 different settings for different users can be memorized...67 7 "Setup" Enables various settings for the navigation system...ix, 80 8 "My Places" Enables changes to "Memory points - 2007 Toyota Sienna | Navigation Manual - Page 223
to display the travel time and the arrival time to the destination on the route guidance screen can be set...81 3 "Keyboard Layout" Key layout can be changed...82 4 "Time Zone" The desired time zone can be selected...83 5 1 " Function" The choice whether to display each touch− screen button and - 2007 Toyota Sienna | Navigation Manual - Page 224
OFF to display the pop−up message is possible...87 13 "Calibration" Adjustment of the current vehicle position mark can be done manually, or mis−calculation by changing tire will be adjusted...87 14 "Default" This touch−screen button initializes all of the settings...80 15 "?" Function help for the