2011 Toyota Sienna Owners Manual - Page 66

1-2. Operating the AUTO ACCESS SEAT n Jam protection function If the operation of the AUTO ACCESS SEAT is interrupted by collision with an obstacle etc., the beep will sound twice and the seat will retreat slightly and then stop. If this happens, make sure that the hands, feet etc. of the occupant will not hit the body of the vehicle, and operate the seat once again after removing the obstacle. n Conditions which will halt operation If another wireless remote control or the seat raise/lower switch are operated while the AUTO ACCESS SEAT is being operated by wireless remote control, the AUTO ACCESS SEAT will stop operating. n If the AUTO ACCESS SEAT has not been stowed properly The following operations cannot be carried out. l Power sliding door function (right-hand sliding door only) l Shifting l Adjustment of the seat position and seatback angle of the AUTO ACCESS SEAT CAUTION n Before returning the AUTO ACCESS SEAT to the vehicle l Check that the right-hand third seat occupant is safe. Their feet etc. may get caught between the AUTO ACCESS SEAT and the vehicle body, possibly causing an injury. l Make sure that the right-hand sliding door is fully open. Otherwise, the hands or feet of the occupant may hit the door when the AUTO ACCESS SEAT is operated, possibly causing an injury. 32 SIENNA AAS_U (OM45460U)