2011 Toyota Sienna Owners Manual - Page 78

3-1. When you think a malfunction has occurred If the AUTO ACCESS SEAT retreats a little and then stops Reason The AUTO ACCESS SEAT has hit an obstacle, or operation has been otherwise obstructed. Correction procedure Remove the obstacle and try operating the AUTO ACCESS SEAT again. If the shift lever cannot be moved from P Reason Correction procedure Press and hold the seat raise switch on the wireless remote control or the raise side of the seat raise/lower switch, and confirm that the AUTO ACCESS SEAT stops automatically and the beep sounds once. Then, try shifting the shift lever again. The AUTO ACCESS SEAT has not been locked in place after being stowed. If the seat position or the seatback angle of the AUTO ACCESS SEAT cannot be adjusted Reason An attempt has been made to adjust the AUTO ACCESS SEAT while it is raising, lowering or rotating, or while it is outside the vehicle. Correction procedure Press and hold the seat raise switch on the wireless remote control or the raise side of the seat raise/lower switch, and confirm that the AUTO ACCESS SEAT stops automatically and the beep sounds once. Then, try adjusting the seat again. 46 SIENNA AAS_U (OM45460U)