2013 Toyota 4Runner Owners Manual
2013 Toyota 4Runner Manual
2013 Toyota 4Runner manual content summary:
- 2013 Toyota 4Runner | Owners Manual - Page 1
BEFORE OPERATION Introduction CONFIRMING DISPLAY AUDIO MODEL This manual is made up of 2 sections. The first describing available functions for models without navigation capabilities (WITHOUT NAVIGATION) such as audio and hands-free. The second describing available functions for models with - 2013 Toyota 4Runner | Owners Manual - Page 2
Display Audio system layout, USB port and rear view camera location, etc. has been used. The actual design and button position may differ depending on the vehicles. For the correct location of these items, please refer to Section 3 and the pictorial index of the "Owner's Manual". ENGINE SWITCH - 2013 Toyota 4Runner | Owners Manual - Page 3
pushing, turning, etc.) used to operate switches and other devices. Indicates the outcome of an operation (e.g. a lid opens). HOW TO READ THIS MANUAL No. Name Operational Outlines Main Operations Related Operations Information Description An outline of the operation is explained. The steps of an - 2013 Toyota 4Runner | Owners Manual - Page 4
1. BASIC INFORMATION BEFORE OPERATION iv - 2013 Toyota 4Runner | Owners Manual - Page 5
explains the operation of the Display Audio system. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The screen shots in this document and the actual screens of the Display Audio system differ depending on whether the functions and/or a contract - 2013 Toyota 4Runner | Owners Manual - Page 6
Read the entire Display Audio system Owner's manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons - 2013 Toyota 4Runner | Owners Manual - Page 7
4 - 2013 Toyota 4Runner | Owners Manual - Page 8
from the list display. Press this button to access the audio system. The audio system turns on in the last mode used. Press this button to pause or resume playing the music. Press this button to access the Bluetooth® handsfree system. Press this button to customize the function settings. Press the - 2013 Toyota 4Runner | Owners Manual - Page 9
this button to access the vehicle information system. This button is used for an add-on external navigation system. (If equipped) Press this knob to turn the audio system on and off, and turn it to adjust the volume. Press this button to eject a disc. Page 1 86 QUICK GUIDE - 16 34 *: If equipped - 2013 Toyota 4Runner | Owners Manual - Page 10
the audio system, press the "AUDIO" button. The audio control screen will be displayed. Audio sources: Radio, CDs, iPod, USB, AUX and Bluetooth® audio. For details, see pages 13. SETUP To customize the function settings, press the "SETUP" button. The interface language can also be changed from - 2013 Toyota 4Runner | Owners Manual - Page 11
GUIDE NOTICE ● To prevent the 12-volt battery from being discharged, do not leave the system on longer than necessary when the engine is not running. INFORMATION ● If the system may be slightly distorted when the display is cold. ● Under extremely cold conditions, the screen may not be displayed - 2013 Toyota 4Runner | Owners Manual - Page 12
1. AUDIO SYSTEM OPERATION 1. QUICK REFERENCE To access the audio system, press the "AUDIO" button. The audio system turns on in the last mode used. The actual design and button position may differ depending on the vehicle. For details, see Section 3 of the vehicle "Owner's Manual". No. Name Audio - 2013 Toyota 4Runner | Owners Manual - Page 13
1. AUDIO SYSTEM OPERATION No. Name "PWR/VOL" knob button Function Press to turn the audio system on and off, and turn to adjust the volume. Press to eject a disc. Page 16 34 2 *: If equipped AUDIO SYSTEM 15 - 2013 Toyota 4Runner | Owners Manual - Page 14
may not pertain to your system. Your audio system works when the engine switch is turned to the "ACC" or "ON" position. TURNING THE AUDIO SYSTEM ON OR OFF CAUTION ● For vehicles sold in U.S.A. and Canada: Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not - 2013 Toyota 4Runner | Owners Manual - Page 15
cursor box to select a desired item from the list, and pressing the knob will play it. The track that is being played is highlighted. 3 Touch a desired audio source. 2 AUDIO SYSTEM If a desired source is not displayed on the screen, touch or to scroll to it. Touching the "ALL" will change the - 2013 Toyota 4Runner | Owners Manual - Page 16
according to vehicle speed to compensate for increased vehicle noise. Without JBL sound system 1 2 Press the "AUDIO" button. Touch . 1 2 1 2 Touch "High", "Mid" or "Low" of "Automatic Sound Levelizer". Touch "OK". With JBL sound system Touch "On" of "Automatic Sound Levelizer". Touch "OK". 18 - 2013 Toyota 4Runner | Owners Manual - Page 17
Touch the "Sound" tab to display this screen. 2 AUDIO SYSTEM 4 Touch the desired screen button. "Treble" "+" or "-": To adjust highpitched tones. "Mid" "+" or "-": To adjust mid-pitched tones. "Bass" "+" or "-": To adjust low-pitched tones. "Front" or "Rear": To adjust the sound balance between - 2013 Toyota 4Runner | Owners Manual - Page 18
button. The station's frequency will be displayed in the screen button. The audio system turns on in the last mode used. 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. To change the preset station to a different one, follow the same procedure. Touch page - 2013 Toyota 4Runner | Owners Manual - Page 19
program type, - display messages from radio stations, - search for a stronger signal station. RBDS features are available only when listening to an FM station that broadcasts RBDS information and the "FM info" indicator is on. SELECTING A DESIRED TYPE 2 AUDIO SYSTEM 1 Touch "Options". 21 - 2013 Toyota 4Runner | Owners Manual - Page 20
1. AUDIO SYSTEM OPERATION 2 Touch "TYPE >" or "< TYPE" to move forward and backward through the program list. TRAFFIC ANNOUNCEMENT A station that regularly broadcasts traffic information is automatically located. Once a program type has been set, "TYPE SEEK" will appear on the screen. The - 2013 Toyota 4Runner | Owners Manual - Page 21
button. The station's frequency will be displayed in the screen button. AUDIO SYSTEM The audio system turns on in the last mode used. 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. To change the preset station to a different one, follow the same procedure - 2013 Toyota 4Runner | Owners Manual - Page 22
the scanning, touch "SCAN" again. (To set the HD Radio™ system, see page 116.) RADIO BROADCAST DATA SYSTEM This audio system is equipped with Radio Broadcast Data Systems (RBDS). RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters. When RBDS is on, the - 2013 Toyota 4Runner | Owners Manual - Page 23
A station that regularly broadcasts traffic information is automatically located. 2 AUDIO SYSTEM Once a program type has been set, "TYPE Music • Religion • Rock • R&B (Rhythm and Blues) • Sports • Talk • Traffic (Not available when "HD Radio™ Settings" are set to analog) • Alert (Emergency - 2013 Toyota 4Runner | Owners Manual - Page 24
digital broadcasts provide free, crystal clear audio with no information, and a guide to available radio stations and programming, refer to the digital signal is acquired, the logo will change to a bright orange color. On the FM radio frequency most digital stations have "multiple" or supplemental - 2013 Toyota 4Runner | Owners Manual - Page 25
2 AUDIO SYSTEM 2 Open the cover and connect iPod using an iPod cable. The USB/AUX port is located on the instrument panel, or in the console box or glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of the vehicle "Owner's Manual - 2013 Toyota 4Runner | Owners Manual - Page 26
to digital signals at the moment. The digital multicast content is not available until HD Radio™ broadcast can be decoded and make the audio available. This takes up to 7 seconds. Data service issue by the radio broadcaster. Audio mute delay when selecting an HD2/HD3 multicast channel preset. This - 2013 Toyota 4Runner | Owners Manual - Page 27
broadcast in the vehicle, a subscription to the XM® Satellite Radio service is necessary. An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and some Canadian provinces. HOW - 2013 Toyota 4Runner | Owners Manual - Page 28
AUDIO" button. 2 The audio system turns on in the last mode used. Touch either "TYPE >" or "< TYPE" to go to the next or previous category. 2 Touch "Source" or press "AUDIO" button to display the audio or to scroll to To change the preset channel to a different one, follow the same procedure. 30 - 2013 Toyota 4Runner | Owners Manual - Page 29
on the right side of the screen. Manual tuning: Turn the "TUNE/SCROLL" knob radio will change up or down to a channel within the current channel category. DISPLAYING THE TITLE AND NAME 1 Touching "Text" displays the artist name and song title you are currently listening to. 2 AUDIO SYSTEM - 2013 Toyota 4Runner | Owners Manual - Page 30
required. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. No Signal Loading Ch Off Air ----- Ch Unavail INFORMATION ● Contact the XM® Listener Care - 2013 Toyota 4Runner | Owners Manual - Page 31
1. AUDIO SYSTEM OPERATION NOTICE ● This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This - 2013 Toyota 4Runner | Owners Manual - Page 32
appropriate discs for this player, see "AUDIO SYSTEM OPERATING HINTS" on page 59. a time. ● Never try to disassemble or oil any part of the CD player. Do not insert anything other than correctly inserted into the slot, the CD player will automatically start playing from the first track or the first - 2013 Toyota 4Runner | Owners Manual - Page 33
of the track and disc currently being played will be displayed. The audio system turns on in the last mode used. : Touch to pause the track that position. INFORMATION 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. ● The progress bar indicator does not - 2013 Toyota 4Runner | Owners Manual - Page 34
AUDIO SYSTEM OPERATION SELECTING A DESIRED TRACK Select a desired track using one of the following methods. PLAYING REPEAT AND RANDOM ORDER (Repeat mode): Use it to automatically Random mode): Use it for automatic random selection of the track. The random mode changes as follows each time the - 2013 Toyota 4Runner | Owners Manual - Page 35
OPERATION PLAYING A MP3/WMA DISC SELECTING A DESIRED FILE Select a desired file using one of the following methods. 2 AUDIO SYSTEM The title of the file and folder currently being played will be displayed. : Touch to pause the file. : Touch to resume playing the file. Fast - 2013 Toyota 4Runner | Owners Manual - Page 36
1. AUDIO SYSTEM OPERATION SELECTING A DESIRED FOLDER PLAYING REPEAT AND RANDOM ORDER 1 Touch "Folders" on the screen. The folder list will be displayed. 2 Touch a desired folder from the list. The file list for the folder will be displayed. (Repeat mode): Use it to automatically repeat the - 2013 Toyota 4Runner | Owners Manual - Page 37
the iPod that is connected to the system, certain functions may not be available. If a function is unavailable due to a malfunction, disconnecting the iPod and reconnecting it may resolve the problem. SWITCHING TO iPod MODE 1 Press the "AUDIO" button. The audio system turns on in the last mode - 2013 Toyota 4Runner | Owners Manual - Page 38
1. AUDIO SYSTEM OPERATION 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. Fast forward and Reverse: iPod and songs in the iPod, iPod cover art may be displayed. This function can be changed to "On" or "Off". See "GENERAL SETTINGS" on page 93. If a desired - 2013 Toyota 4Runner | Owners Manual - Page 39
OPERATION SELECTING A DESIRED SONG Select a desired song using one of the following methods. SELECTING A PLAY MODE 1 Touch "Browse" on the screen. 2 AUDIO SYSTEM 2 "SEEK/TRACK" button: Press the " " or " " of "SEEK/TRACK" button to select a desired song. "TUNE/SCROLL" knob: Turn this control - 2013 Toyota 4Runner | Owners Manual - Page 40
1. AUDIO SYSTEM OPERATION PLAYING REPEAT AND SHUFFLE (Repeat mode): Use it to automatically repeat the song you are currently listening to. The repeat mode changes as follows each time the screen button is touched. :Repeating the song :OFF (Shuffle mode): Use it for automatic shuffling of the - 2013 Toyota 4Runner | Owners Manual - Page 41
console box or glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of the vehicle "Owner's Manual". Turn on the power of the USB memory if it is not turned on. INFORMATION ● When USB memory is connected and the audio source is changed - 2013 Toyota 4Runner | Owners Manual - Page 42
1. AUDIO SYSTEM OPERATION 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. Fast forward and Reverse: Press and hold the " " or " " of "SEEK/TRACK" button to fast forward or reverse. When you release the - 2013 Toyota 4Runner | Owners Manual - Page 43
from the list. The file list for the folder will be displayed. 2 AUDIO SYSTEM Touch a desired file. The player will start playing the selected file from Repeat mode): Use it to automatically repeat the file or folder you are currently listening to. The repeat mode changes as follows each time the - 2013 Toyota 4Runner | Owners Manual - Page 44
1. AUDIO SYSTEM OPERATION (Random mode): Use it for automatic random selection of the file. The random mode changes as follows each time the screen button is touched. :Playing the files on the folder in random order :Playing the files in all the folders in random order :OFF 46 - 2013 Toyota 4Runner | Owners Manual - Page 45
to enjoy music via the vehicle speakers. CONNECTING A PORTABLE AUDIO DEVICE 1 CAUTION ● Do not connect a portable audio device or operate the device controls while driving. Open the cover of the USB/AUX port and connect a portable audio device. 2 AUDIO SYSTEM NOTICE ● Do not leave the portable - 2013 Toyota 4Runner | Owners Manual - Page 46
the last mode used. Only the volume can be adjusted using the audio system controls. The remaining controls need to be operated on the portable audio device itself. 2 Touch "Source" or press "AUDIO" button to display the audio source selection screen. 3 Touch "AUX" on the screen. If a desired - 2013 Toyota 4Runner | Owners Manual - Page 47
music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system will not function. Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION 2 AUDIO SYSTEM ● Portable audio players must correspond to the following specifications in order to - 2013 Toyota 4Runner | Owners Manual - Page 48
1. AUDIO SYSTEM OPERATION CAUTION ● FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ● CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits - 2013 Toyota 4Runner | Owners Manual - Page 49
your portable player. Once you have registered it, the system automatically connects to your portable audio player device every time you start your vehicle. The portable audio player information is registered when the Bluetooth® audio system is connected. When you release possession of your vehicle - 2013 Toyota 4Runner | Owners Manual - Page 50
, the device may not be automatically connected. Bluetooth® AUDIO SETTINGS You can change the Bluetooth® settings. See "Bluetooth® SETTINGS" on page 98. "Connection Method" "From Audio Player": Connect the portable audio player to the audio system. This function can be changed to "From Vehicle" or - 2013 Toyota 4Runner | Owners Manual - Page 51
will start playing from that position. INFORMATION ● An antenna for the Bluetooth® connection is built into in the display. The condition of the Bluetooth® connection may not be good and the system may not function when you use the portable audio player in the following conditions. • Your portable - 2013 Toyota 4Runner | Owners Manual - Page 52
players, remaining battery charge is not displayed. ● The amount left does not always correspond to that of the portable audio players. ● This system does not have a charging function. Touch a desired track. The player will start playing the selected track from the beginning. Touch or to scroll - 2013 Toyota 4Runner | Owners Manual - Page 53
1. AUDIO SYSTEM OPERATION 2 Touch a desired album from the list. The track list for the album will be displayed. (Random mode): Use it for automatic random selection of the track. The random mode changes as follows each time the screen button is touched. :Playing the tracks on the album in - 2013 Toyota 4Runner | Owners Manual - Page 54
OPERATION 11. STEERING SWITCHES Some parts of the audio system can be adjusted with the switches on the steering wheel. " " " " switch Radio To select a preset station: Press the " " or " " switch. STEERING SWITCHES (WITH TWO DIRECTION STEERING SWITCH) To seek a radio station: Press and hold the - 2013 Toyota 4Runner | Owners Manual - Page 55
is not available. To select a desired folder (USB memory): Press the " " or " " switch to change to the next or the previous folder. 2 AUDIO SYSTEM The design and switch position may differ depending on the vehicle. For details, see the Pictorial index of the vehicle "Owner's Manual". Details of - 2013 Toyota 4Runner | Owners Manual - Page 56
OPERATION "MODE" switch Press the "MODE" switch to select an audio mode. Each press changes the mode sequentially if the desired mode is ready to use. To turn the audio system on, press the "MODE" switch. Press and hold the "MODE" switch until you hear a beep and the music will pause or be muted - 2013 Toyota 4Runner | Owners Manual - Page 57
of course, radio signals have a limited range, and the farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio. AM Fading - 2013 Toyota 4Runner | Owners Manual - Page 58
AUDIO SYSTEM OPERATION XM® Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM® Satellite Radio iPod" and "Made for iPhone" means that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has - 2013 Toyota 4Runner | Owners Manual - Page 59
2 AUDIO SYSTEM CARING FOR YOUR CD PLAYER AND DISCS Your CD player is intended for use with 12 cm (4.7 in.) discs only. To play 8 cm (3 in.) discs, use an adaptor. Extremely high temperatures can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before - 2013 Toyota 4Runner | Owners Manual - Page 60
AUDIO SYSTEM of a track. (To see a pin hole, hold the disc up to the light.) Remove discs from the CD player when you are not using them. Store them the player, or it may be impossible to eject the disc. ● This system is not designed for use of Dual Disc. Do not use Dual Disc because it may - 2013 Toyota 4Runner | Owners Manual - Page 61
, 24 kHz WMA files for WMA player: Ver. 7, 8, 9 CBR ⎯ 32, 44.1, 48 kHz WMA files for USB memory: Ver. 7, 8, 9 ⎯ HIGH PROFILE 32, 44.1, 48 kHz 2 AUDIO SYSTEM PLAYABLE BIT RATES MP3 files for MP3 player: MPEG1 LAYER3 ⎯ 32 to 320 kbps MPEG2 LSF LAYER3 ⎯ 8 to 160 kbps MP3 files for USB memory - 2013 Toyota 4Runner | Owners Manual - Page 62
1. AUDIO SYSTEM OPERATION MP3/WMA files in folders up to 8 levels deep can be played. However, the start of playback may device: 3000 Maximum number of files in one folder: 255 Maximum number of files in device: 9999 The order changes depending on the PC and MP3/WMA encoding software you use. 64 - 2013 Toyota 4Runner | Owners Manual - Page 63
standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. 2 AUDIO SYSTEM WMA ID3 TAG This is a method of embedding trackrelated information in an MP3 file. This embedded - 2013 Toyota 4Runner | Owners Manual - Page 64
1. AUDIO SYSTEM OPERATION 66 - 2013 Toyota 4Runner | Owners Manual - Page 65
1. Bluetooth® HANDS-FREE SYSTEM OPERATION 1. QUICK REFERENCE This screen can be used to make a phone call. To display the "Phone" screen, press the switch on the steering wheel or the button. The actual design and button position may differ depending on the vehicle. For details, see Section 3 of - 2013 Toyota 4Runner | Owners Manual - Page 66
allows you to make or receive a call without taking your hands off the steering wheel by connecting your cellular phone. This system supports Bluetooth®. Bluetooth® is a wireless data system by which you can call without your cellular phone being connected with a cable or placed on a cradle. The - 2013 Toyota 4Runner | Owners Manual - Page 67
The actual design and button position may differ depending on the vehicle. For details, see the Pictorial index of the vehicle "Owner's Manual". Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION ● This system supports the following service. ● Bluetooth® Specification Ver - 2013 Toyota 4Runner | Owners Manual - Page 68
1. Bluetooth® HANDS-FREE SYSTEM OPERATION INFORMATION ● The other party's voice outputs from the front speaker. When the received calls or received voice outputs, the audio from the audio system will be muted. ● Talk alternately with the other party on the phone. If you talk at the same time, your - 2013 Toyota 4Runner | Owners Manual - Page 69
1. Bluetooth® HANDS-FREE SYSTEM OPERATION CAUTION ● FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ● CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation - 2013 Toyota 4Runner | Owners Manual - Page 70
may not be displayed depending on the phone you have. When you are out of the service area or in a place inaccessible by radio waves, "No Service" is displayed. INFORMATION Bluetooth® HANDS-FREE SYSTEM ● An antenna for the Bluetooth® connection is built into the display. ● The condition of the - 2013 Toyota 4Runner | Owners Manual - Page 71
® phone according to the confirmation message. If you want to cancel it, touch "Cancel". If the Bluetooth® phone to be registered has a Bluetooth® audio function, this can be registered at the same time. 1 Press the button or the switch on the steering wheel. 2 Touch "Yes" to register your - 2013 Toyota 4Runner | Owners Manual - Page 72
. (For automatic connection, see "CHANGING THE Bluetooth® POWER" on page 103.) If the Bluetooth® is disconnected on purpose such as you turned your Bluetooth phone off, this does not happen. Reconnect the Bluetooth® phone manually. INFORMATION Touch "Connect Phone". 3 Bluetooth® HANDS-FREE SYSTEM - 2013 Toyota 4Runner | Owners Manual - Page 73
® HANDS-FREE SYSTEM OPERATION 4. CALL ON THE Bluetooth® PHONE After you register the Bluetooth® phone, you can call by using Bluetooth® hands-free system. BY PHONEBOOK You can make a call using the phonebook data which is transferred from your cellular phone. The system has one phonebook for - 2013 Toyota 4Runner | Owners Manual - Page 74
.) 1 Touch "Contacts". 1 Press the switch on the steering 3 wheel or the button to display the "Phone" screen. If your phone does not support either PBAP or OPP service, you cannot transfer contacts. Bluetooth® HANDS-FREE SYSTEM 2 Touch "Speed Dials". PBAP compatible models 2 Touch "Yes - 2013 Toyota 4Runner | Owners Manual - Page 75
1. Bluetooth® HANDS-FREE SYSTEM OPERATION BY CALL HISTORY You can make a call using the call received Outgoing: calls which you made 4 Touch or press the on the steering wheel. switch 1 Press the switch on the steering wheel or the button to display the "Phone" screen. You can make a call - 2013 Toyota 4Runner | Owners Manual - Page 76
"Cancel", or press and hold the talk switch. The actual design and button position may differ depending on the vehicle. For details, see the Pictorial index of the vehicle "Owner's Manual". INFORMATION 3 Bluetooth® HANDS-FREE SYSTEM 2 After a beep sounds, say the command of your choice. Voice - 2013 Toyota 4Runner | Owners Manual - Page 77
1. Bluetooth® HANDS-FREE SYSTEM OPERATION VOICE COMMAND EXAMPLE: CALL NAME 3 Say "Dial" to Mobile, Work and Other. Short or abbreviated names in the phonebook may not be recognized. Change names in the phonebook to full names. Sometimes a voice recognition result confirmation screen will be - 2013 Toyota 4Runner | Owners Manual - Page 78
candidate list. 3 3 Say "Dial" to call the phone number. Bluetooth® HANDS-FREE SYSTEM INTERNATIONAL CALL To dial a phone number that is not a 3, 7, 10 call can also made by pressing the switch on the steering wheel. Canceling the voice recognition: The voice recognition will be canceled when - 2013 Toyota 4Runner | Owners Manual - Page 79
® HANDS-FREE SYSTEM OPERATION 5. RECEIVE ON THE Bluetooth® PHONE When a call is received, this screen is displayed with a sound. To answer the phone: Press the switch on the steering wheel or touch . To refuse to receive the call: Press the switch on the steering wheel or touch . To adjust - 2013 Toyota 4Runner | Owners Manual - Page 80
YOU TOUCH "0-9" 1 Enter a number by touching the number keys. 3 Bluetooth® HANDS-FREE SYSTEM To adjust the volume of the other party's voice: Touch "-" or hang up the phone: Press the switch on the steering wheel or touch . ● When you change from cellular phone call to Hands-free call, the - 2013 Toyota 4Runner | Owners Manual - Page 81
Bluetooth® HANDS-FREE SYSTEM operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the the switch on the steering wheel or touch . To refuse to receive the call: Press the wheel or touch switch on the steering - 2013 Toyota 4Runner | Owners Manual - Page 82
actual design and button position may differ depending on the vehicle. For details, see Section 3 of the vehicle "Owner's Manual". The "Information" screen shown above is displayed if the vehicle is equipped with both a fuel consumption and a tire pressure warning system. No. Name "Fuel Consumption - 2013 Toyota 4Runner | Owners Manual - Page 83
1. VEHICLE INFORMATION 2. FUEL CONSUMPTION∗ FUEL CONSUMPTION (VEHICLES WITH HYBRID SYSTEM) Fuel consumption such as shown below can be displayed on the screen. For details see Section 1-1 of the vehicle "Owner's Manual". Energy monitor Trip consumption History If the "Trip Information" screen is - 2013 Toyota 4Runner | Owners Manual - Page 84
"History" screen is not displayed, touch "History". No. Name Previous fuel economy record Current fuel economy Best recorded fuel economy The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last reset. "Clear": Past record data can - 2013 Toyota 4Runner | Owners Manual - Page 85
addition to a warning indication on the meter if tire pressure becomes low. For information on the tire pressure warning system, refer to the vehicle "Owner's Manual". 2 Touch "Tire Pressure". 3 The tire pressure value of each tire will be displayed. Type A 4 VEHICLE INFORMATION To confirm tire - 2013 Toyota 4Runner | Owners Manual - Page 86
1. VEHICLE INFORMATION 90 - 2013 Toyota 4Runner | Owners Manual - Page 87
Settings are available for HD Radio™ system. Settings are available for phone sound, phonebook, etc. Page 93 95 96 "Bluetooth*2" 98 93, 95, 96, 98, 106, 116, 117 117 116 106 "SETUP" button "Vehicle"*1 "Audio"*1 "Phone" *1: Vehicles with Premium Display Audio system *2: Bluetooth is a registered - 2013 Toyota 4Runner | Owners Manual - Page 88
SETUP OPERATION 2. GENERAL SETTINGS Settings are available for language selection, operation sounds, screen animation, etc. SCREENS FOR GENERAL SETTINGS 1 Press the "SETUP" button. On this screen, the following functions are operational. No. Function You can change the language. (See "SELECTING - 2013 Toyota 4Runner | Owners Manual - Page 89
region. 5 Touch "Save". ● The following personal data can be deleted or returned to their default settings: • Phone book data • Call history data • Speed dial data • Bluetooth® devices data • Phone sound settings • Detailed - 2013 Toyota 4Runner | Owners Manual - Page 90
1. SETUP OPERATION 3. GUIDANCE SETTINGS (WITH Premium Display Audio SYSTEM) Voice recognition guidance for Bluetooth® hands-free systems can be set. SCREEN FOR VOICE GUIDANCE SETTINGS 1 Press the "SETUP" button. On this screen, the following functions can be performed. 2 Touch "Guidance". No - 2013 Toyota 4Runner | Owners Manual - Page 91
turn it on, press the "AUDIO", "CAR" or "SETUP" button. CHANGING BETWEEN DAY AND NIGHT MODE Depending on the position of the headlight switch, the screen changes to day or night mode. 3 in day mode with the headlight switch turned on, this condition is memorized even with the engine turned off. 96 - 2013 Toyota 4Runner | Owners Manual - Page 92
1. SETUP OPERATION ADJUST CONTRAST/ BRIGHTNESS 1 2 3 Press the "SETUP" button. Touch "Display" on the "Setup" screen. Touch "General" or "Camera", in which you want to make an adjustment. 5 SETUP 4 Select "Contrast" or "Brightness" using the or . 5 Adjust the contrast or brightness using - 2013 Toyota 4Runner | Owners Manual - Page 93
1. SETUP OPERATION 5. Bluetooth® SETTINGS You can confirm and change the Bluetooth® settings. REGISTERED DEVICES 1 Press the "SETUP" button. 1 2 Press the "SETUP" button. Touch "Bluetooth*" on the "Setup" screen. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 3 Touch " - 2013 Toyota 4Runner | Owners Manual - Page 94
or Bluetooth® audio functions. REMOVING A Bluetooth® DEVICE 5 1 Touch "Remove" to remove your SETUP Bluetooth® device from the system. 4 When the connection is completed, this screen is displayed. 2 Select the device to remove. Once you have registered it, the system automatically connects - 2013 Toyota 4Runner | Owners Manual - Page 95
. The address peculiar to the system. You cannot change it. If the same device name is displayed on the screen of your device, refer to it. Phone number of your phone. The number may not be displayed depending on the phones. The profiles which support your Bluetooth® device. (For details of each - 2013 Toyota 4Runner | Owners Manual - Page 96
1. SETUP OPERATION 2 Touch "OK". 4 Select the device to connect. "From Vehicle": Connect the audio system to the portable audio player. "From Audio Player": Connect the portable audio player to the audio system. - 2013 Toyota 4Runner | Owners Manual - Page 97
1. SETUP OPERATION 3 Touch "Connect Audio Player". DETAILED Bluetooth® SETTINGS 1 2 3 4 Select the device to connect. Press the "SETUP" button. Touch "Bluetooth*" on the "Setup" screen. Touch "Detailed Settings". Bluetooth* The Bluetooth® mark is displayed when you connect the device. When you - 2013 Toyota 4Runner | Owners Manual - Page 98
It is available to set whether registered devices will be connected automatically or not. The name in the Bluetooth® network. You cannot change it. The password when you register your Bluetooth device in the system. You can change it. The address peculiar to the system. You can not change it. The - 2013 Toyota 4Runner | Owners Manual - Page 99
and the Bluetooth® phone is automatically connected, the connection check is displayed. 1 Touch "Passcode". 2 Input a passcode and touch "OK". You can select the state of "Display Phone Status". On: The status is displayed. Off: The status is not displayed. CHANGING THE DISPLAY AUDIO PLAYER - 2013 Toyota 4Runner | Owners Manual - Page 100
1. SETUP OPERATION When you start your vehicle and the Bluetooth® portable audio player is automatically connected, the connection check is displayed. You can select the state of "Display Audio Player Status". On: The status is displayed. Off: The status is not displayed. 5 INITIALIZING THE - 2013 Toyota 4Runner | Owners Manual - Page 101
. PHONE SOUND SETTINGS 1 Press the "SETUP" button. 1 Touch "Phone Sound Settings". 2 2 Touch "Phone". Change each setting according to the following procedures. 3 Touch the items to be set. 3 When you complete all settings, touch "Save". CALL VOLUME SETTING 1 2 Please refer - 2013 Toyota 4Runner | Owners Manual - Page 102
1. SETUP OPERATION RING TONE VOLUME SETTING 1 Touch "Default". 1 2 Touch "Ring Tone Volume". Touch "-" or "+" to adjust the ring volume. PHONEBOOK 3 Touch "OK". 1 2 3 Press the "SETUP" button. Touch "Phone". Touch "Phonebook". 5 RING TONE SELECTING SETUP 1 2 Touch "Ring Tone". Touch " - 2013 Toyota 4Runner | Owners Manual - Page 103
pages for each setting. PBAP incompatible but OPP compatible models TRANSFERRING A PHONE NUMBER You can transfer the phone numbers in your Bluetooth® phone to the system. The phonebook manages a maximum of 5 phonebooks each. Up to 1000 person's data (up to 3 numbers a person) can be registered in - 2013 Toyota 4Runner | Owners Manual - Page 104
INFORMATION 5 1 2 3 Press the wheel or the switch on the steering button. Touch "Contacts". Touch "Transfer". ● If you try to manually transfer when transferring automatically, progression display on automatic transfer will be displayed. ● The old phonebook data is available during the transfer - 2013 Toyota 4Runner | Owners Manual - Page 105
of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter "1234" into the Bluetooth® phone. ® 2 Transfer the phonebook data to the system using the Bluetooth® phone. Depending on the type of cellular phone, OBEX authentication may be required when transferring - 2013 Toyota 4Runner | Owners Manual - Page 106
want to delete or touch "All Delete". INFORMATION ● When you delete a Bluetooth® phone, the phonebook data will be deleted at the same time. SPEED can also delete it in the following way. 5 SETUP 1 2 3 4 Press the wheel or the switch on the steering button. 1 2 3 4 Press the "SETUP" button. - 2013 Toyota 4Runner | Owners Manual - Page 107
1. SETUP OPERATION You can also display the "Speed Dials" screen in the following way. - 2013 Toyota 4Runner | Owners Manual - Page 108
1. SETUP OPERATION 4 Touch the screen button you want to register in. You can also register the speed dial in the following ways. From "Speed Dial" screen 1 2 3 - 2013 Toyota 4Runner | Owners Manual - Page 109
number. From "Call History" screen 1 2 3 4 From "Contact" screen Press the wheel or the switch on the steering button. Touch "Call History". Touch the desired phone number. Touch "Add Speed Dial". 1 2 3 4 Press the wheel or the switch on the steering button. Touch "Contacts". Select the - 2013 Toyota 4Runner | Owners Manual - Page 110
Download Contact" to "Off". (See "AUTOMATIC PHONEBOOK DOWNLOAD SETTING" on page 109) You can also delete the call history in the following way. 1 2 3 Press the wheel or the switch on the steering button. Touch "Call History". Touch "Delete". 1 Touch "Delete Call History". 5 4 2 Select - 2013 Toyota 4Runner | Owners Manual - Page 111
SETTINGS (WITH Premium Display Audio SYSTEM) HD Radio™ system can be set using the following procedure: 4 Select the desired setting from "HD Radio/Analog Setting". 1 Press the "SETUP" button. Screen button "All" Function Touch to receive both analog and digital broadcasts. Touch to receive - 2013 Toyota 4Runner | Owners Manual - Page 112
SETUP OPERATION 8. VEHICLE SETTINGS∗ Vehicle customization settings can be changed. 4 After changing the settings, touch "Save". A message indicating that the desired items to be set. For a list of the settings that can be changed, see the vehicle "Owner's Manual". ∗ : If equipped 117 - 2013 Toyota 4Runner | Owners Manual - Page 113
1. SETUP OPERATION 118 - 2013 Toyota 4Runner | Owners Manual - Page 114
check the vehicle surrounding area, because the guide lines are ancillary lines. ● The guide lines are ancillary lines and do not change even if the steering wheel is turned. 1 To display the rear view image on the screen, the shift lever is in the "R" position when the engine switch is in the "ON - 2013 Toyota 4Runner | Owners Manual - Page 115
behind on the ground of the rear bumper of the vehicle. Vehicle center guide lines (blue) These lines indicate the estimated vehicle center on the ground. 6 REAR VIEW MONITOR SYSTEM INFORMATION ● If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud - 2013 Toyota 4Runner | Owners Manual - Page 116
according to vehicle orientation or road conditions. THE REAR VIEW MONITOR SYSTEM CAMERA The rear view monitor system camera is located as shown in the illustration. Corners of bumper INFORMATION ● The area detected by the camera is limited. The camera does not detect objects which are close to - 2013 Toyota 4Runner | Owners Manual - Page 117
when the system is functioning. snow or mud) is adhering to the camera • When the camera has scratches or dirt on it • When the sun or the beam of headlights is shining directly into the camera lens ● When the camera is used under fluorescent lights, sodium lights, or mercury lights etc., the lights - 2013 Toyota 4Runner | Owners Manual - Page 118
MONITOR SYSTEM 2. DRIVING PRECAUTIONS (WITH REAR VIEW MONITOR GUIDE LINES) In any of the following situations, there is a margin of error between the guide lines appear to be farther away than they actually are. When any part of the vehicle sags due to the number of passengers or the distribution of - 2013 Toyota 4Runner | Owners Manual - Page 119
road) and the actual distance differ as follows. • In reality, and = < ( and are equally far away; is farther than REAR VIEW MONITOR SYSTEM ). However, on the screen, the situation appears to be < < . • On the screen, it appears that a truck is parking approximately 1.5 ft. (0.5 m) away. However - 2013 Toyota 4Runner | Owners Manual - Page 120
1. REAR VIEW MONITOR SYSTEM 126 - 2013 Toyota 4Runner | Owners Manual - Page 121
screens of the Display Audio system differ depending on whether the functions and/or a contract existed and the map data available at the time of producing this document. NAVIGATION SYSTEM The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The - 2013 Toyota 4Runner | Owners Manual - Page 122
1. BASIC INFORMATION BEFORE OPERATION IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention with the following marks. CAUTION ● This is a warning against anything which may cause injury to people if the warning is - 2013 Toyota 4Runner | Owners Manual - Page 123
Read the entire Display Audio system Owner's manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons - 2013 Toyota 4Runner | Owners Manual - Page 124
1. BASIC INFORMATION BEFORE OPERATION 5 - 2013 Toyota 4Runner | Owners Manual - Page 125
from the list display. Press this button to access the audio system. The audio system turns on in the last mode used. Press this button to pause or resume playing the music. Press this button to access the Bluetooth® hands-free system. Press this button to customize the function settings. Page 14 - 2013 Toyota 4Runner | Owners Manual - Page 126
station, or to access a desired track or file. Press this button to access the vehicle information system. Press to display a list of applications. Press this knob to turn the audio system on and off, and turn it to adjust the volume. Press this button to eject a disc. Page 107, 114, 119, 121, 124 - 2013 Toyota 4Runner | Owners Manual - Page 127
calls without taking their hands off the steering wheel. For details, see page 153. AUDIO SYSTEM To access the audio system, press the "AUDIO" button. The audio control screen will be displayed. Audio sources: Radio, CDs, iPod, USB, AUX and Bluetooth® audio. For details, see page 99. VOICE COMMAND - 2013 Toyota 4Runner | Owners Manual - Page 128
VIEW MONITOR SYSTEM Shifting into the "R" position will automatically show the view behind the rear of the vehicle on the display screen. For details, see page 213. 1 QUICK GUIDE SETUP To customize the function settings, press the "SETUP" button. The interface language can also be changed from the - 2013 Toyota 4Runner | Owners Manual - Page 129
driving. NOTICE ● To prevent the 12-volt battery from being discharged, do not leave the system on longer than necessary when the engine is not running moving images may be slightly distorted when the display is cold. ● Under extremely cold conditions, the screen may not be displayed and the data - 2013 Toyota 4Runner | Owners Manual - Page 130
1. CONTROLS AND FEATURES - 2013 Toyota 4Runner | Owners Manual - Page 131
stop when the top/bottom of the list is reached. :Touch to have entries that are too long to fit in the current field scrolled automatically from right to left. :This indicates the displayed screen's position. 2 Touch desired item. INFORMATION ● While driving, changing pages will be limited. 16 - 2013 Toyota 4Runner | Owners Manual - Page 132
, "ABC", "DEF" etc., which allow a direct jump to list entries that begin with the same letter as the character screen button. 1 QUICK GUIDE 1 Touch one of the character screen buttons. INFORMATION ● Every time the same character screen button is touched, the list starting with the subsequent - 2013 Toyota 4Runner | Owners Manual - Page 133
"Applications" menu screen. No. Function Press to display a list of applications. "Map" provides the user with navigation, route calculation, destination entry (manually or via voice recognition), turn by turn directions, and real-time traffic. Touch to view pictures stored on a USB memory. Touch - 2013 Toyota 4Runner | Owners Manual - Page 134
options. It can also be added as a waypoint to a destination. Touch to display the "Traffic Messages" screen. Traffic messages function is using Entune service. It contains a list of traffic messages relating to the set route, all traffic messages and warnings. Touch to display the "Route Options - 2013 Toyota 4Runner | Owners Manual - Page 135
guidance screen No. Function This symbol indicates a map layout. Touching this symbol changes the map layout. Displays the distance, the estimated travel time to the destination and/or adjust the volume of voice guidance. Touch to change the map scale. Page 28 44 86 44 46 21 44 20, 74 45 27 22 - 2013 Toyota 4Runner | Owners Manual - Page 136
vehicle position Viewing the current vehicle position vicinity map Changing the scale Changing the map layout Displaying Point of Interest Icons Viewing traffic messages Searching destination Searching the destination Setting the entry registered with the system as the destination Page 25 25 27 27 - 2013 Toyota 4Runner | Owners Manual - Page 137
1. NAVIGATION OPERATION During route guidance Stopping route guidance Adjusting route guidance volume Displaying the entire route map Page 46 45 46 Memory point Memory point Registering the entry Editing the entry Loading the entry from external devices Page 52 58 56 24 - 2013 Toyota 4Runner | Owners Manual - Page 138
screen will be displayed when the screen is changed to the map screen for the first time after the engine switch has been in the "ACC" or CURRENT VEHICLE POSITION DISPLAY When starting the navigation system, the current position is displayed first. This automatically switches to the map screen. 25 - 2013 Toyota 4Runner | Owners Manual - Page 139
1. NAVIGATION OPERATION INFORMATION - 2013 Toyota 4Runner | Owners Manual - Page 140
1. NAVIGATION OPERATION SCREEN SCROLL OPERATION When any point on the map is touched, that point moves to the center of the screen and is shown by the cursor mark . MAP CONFIGURATIONS Any of the following map configurations can be selected. - 2013 Toyota 4Runner | Owners Manual - Page 141
1. NAVIGATION OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 142
1. NAVIGATION OPERATION 4. MAP ICONS POI ICONS DISPLAY POI ICONS Points of Interest such as gas stations and restaurants can be displayed on the map screen. Their location can also be set as a destination. POI icons are displayed on the map. - 2013 Toyota 4Runner | Owners Manual - Page 143
POI Name Highway Exit Bar, Nightlife Airport, Dep. /Arrival, Ground, International, Domestic Bus Terminal, Bus Stop, Transportation, Public , Chinese, German, Greek, Vegetarian, Fast Food, Grill, Sea Food, Sandwich, Steak... Gas Station Rent-a-Car,-Facility, -Parking Ferry Terminal Parking, - 2013 Toyota 4Runner | Owners Manual - Page 144
Factory Outlet Shop, Department Store, Drivethrough-bottle-shop Tourist Attractions, Tourist Attractions Important Park/Recreational Area Yacht Basin, Harbour Camping Ground Grocery Store Historical Monument RV Park, Camping Bookstore Hair & Beauty Photography Shoestore Wine & Liquor 31 - 2013 Toyota 4Runner | Owners Manual - Page 145
1. NAVIGATION OPERATION DISPLAYING POI INFORMATION 1 2 Touch the desired POI icon on the map. Touch One POI . Multiple POI 3 POI information will be displayed. When "Calculate" is touched, the starting route guidance screen is displayed. (See page 42.) When "Save" is touched, the point is - 2013 Toyota 4Runner | Owners Manual - Page 146
BY "Stored" Destinations can be selected from the destinations registered with the system. To use this function, it is necessary to register the entry. ( a message will be displayed and the setting screen will automatically appear. (See page 53.) Please refer to the following pages for a description - 2013 Toyota 4Runner | Owners Manual - Page 147
of a contact from the phone book of a connected cellular phone. Before using this function, connect a Bluetooth® phone with a phone profile. (See page 203.) If a contact does not have address information stored . (See page 42.) INFORMATION ● "Search Contact" cannot be operated while driving. 34 - 2013 Toyota 4Runner | Owners Manual - Page 148
2. DESTINATION SEARCH DESTINATION SEARCH ON THE "Enter Destination" SCREEN There are several ways to search a destination. (a)Destination search by address (b)Destination search by POI (c)Destination search by advanced DESTINATION SEARCH BY "Address" A destination can be searched using a city name - 2013 Toyota 4Runner | Owners Manual - Page 149
2. DESTINATION SEARCH 5 Touch "City" or "Zip" to enter the city name or zip code. DESTINATION SEARCH BY "POI" POIs in a specific area can be searched by category, name or from the map. - 2013 Toyota 4Runner | Owners Manual - Page 150
2. DESTINATION SEARCH 5 Touch for the desired item. - 2013 Toyota 4Runner | Owners Manual - Page 151
2. DESTINATION SEARCH - 2013 Toyota 4Runner | Owners Manual - Page 152
2. DESTINATION SEARCH Selecting "Around" area - 2013 Toyota 4Runner | Owners Manual - Page 153
2. DESTINATION SEARCH DESTINATION SEARCH BY "Advanced" - 2013 Toyota 4Runner | Owners Manual - Page 154
2. DESTINATION SEARCH - 2013 Toyota 4Runner | Owners Manual - Page 155
sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such changed information. ● The default recommended route can be changed. (See pages 43 and 64.) ● The arrival time or the remaining - 2013 Toyota 4Runner | Owners Manual - Page 156
to avoid border crossings. 3 The route will be recalculated. 3 4 Touch . The route will be recalculated. INFORMATION ● Setting the route preference and avoidance can be also changed from the "Route Options" screen. (See page 64.) 43 - 2013 Toyota 4Runner | Owners Manual - Page 157
3. ROUTE GUIDANCE 2. ROUTE GUIDANCE ROUTE GUIDANCE SCREEN While guiding the route, the following screen will be displayed. - 2013 Toyota 4Runner | Owners Manual - Page 158
regulations and keep the road condition in mind especially when you are driving on IPD roads. The route guidance may not have the updated information function. ● On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on city streets - 2013 Toyota 4Runner | Owners Manual - Page 159
3. ROUTE GUIDANCE 3. SETTING AND DELETING THE ROUTE Routes can be checked, changed and recalculated during route guidance. No. Function Touch to change the map setting. (See page 61.) Touch to stop the current route guidance. Touch to set the route preferences and the avoidance criteria for the - 2013 Toyota 4Runner | Owners Manual - Page 160
segments of the route can be displayed. 1 2 Touch "Route Options For Current Route" on the "Options" screen. Touch the desired item to change the route setting. 1 2 Touch "Route List" on the "Options" screen. Touch the desired item to display the segment. 2 APPLICATION-"Map" "Preferences - 2013 Toyota 4Runner | Owners Manual - Page 161
A blocked route will be marked in the map. After the blocked route has been detoured, the block road ahead function will automatically be deactivated. On this screen, the following information is displayed. No. Information Address of destination Selected route preference Selected avoidance criteria - 2013 Toyota 4Runner | Owners Manual - Page 162
3. ROUTE GUIDANCE ADDING DESTINATIONS Destinations can be added and the route changed accordingly. If you search the destination by "Enter Address" 5 Touch "Add as Waypoint". If you search the destination by "Select Point on Map" or "Enter - 2013 Toyota 4Runner | Owners Manual - Page 163
functions can be operated. No. Function Touch to register the point in the "Stored" list on the "My Destinations" screen. (See page 55.) Touch to change the order of the destinations. Touch or to move the destination up or down the order displayed on the next screen. 1 Touch "Show Destination List - 2013 Toyota 4Runner | Owners Manual - Page 164
3. ROUTE GUIDANCE DETOURING A SEGMENT ON THE ROUTE When detouring a segment, the detour route can be changed. DETOURING THE SEGMENT CANCELLING THE DETOURED SEGMENT 1 2 Display the route list. (See page 47.) Touch "Detours". 2 APPLICATION-"Map" 1 2 Display the route list. (See page 47.) - 2013 Toyota 4Runner | Owners Manual - Page 165
A ENTRY REGISTERING A NEW ENTRY Up to 200 destinations can be registered with this system. INFORMATION 5 Input the entry address. (See page 35.) ● This function cannot be operated while driving. REGISTERING FROM THE "My Destinations" SCREEN 6 7 Touch "Save New Entry". Input the entry - 2013 Toyota 4Runner | Owners Manual - Page 166
4. MY DESTINATIONS - 2013 Toyota 4Runner | Owners Manual - Page 167
4. MY DESTINATIONS REGISTERING FROM THE MAP REGISTERING FROM THE LIST 1 2 Touch the desired point on the map. Touch "Save". - 2013 Toyota 4Runner | Owners Manual - Page 168
4. MY DESTINATIONS - 2013 Toyota 4Runner | Owners Manual - Page 169
4. MY DESTINATIONS REGISTERING FROM AN EXTERNAL DEVICE "vCard" formatted data can be transferred from a USB memory to this system. Transferred addresses and numbers will be stored in the "Stored" list on the "My Destinations" screen and "Contacts" screen. (See pages 52 and 165.) 4 5 Touch " - 2013 Toyota 4Runner | Owners Manual - Page 170
4. MY DESTINATIONS INFORMATION ● If a message similar to the one below is displayed, delete X item(s) in the "Stored" list on the "My Destinations" screen and "Contacts" screen to make room for the new destination(s). (See pages 58 and 168.) 2 APPLICATION-"Map" - 2013 Toyota 4Runner | Owners Manual - Page 171
be operated. NO. Function Touch to display the details of the entry information. (See page 59.) The entry options screen of "Stored" list Touch to change the entry name. (See page 59.) Touch to edit the address. (See page 59.) Touch to delete the entry. Touch to delete all entries. The - 2013 Toyota 4Runner | Owners Manual - Page 172
and a picture, if available, of the contact from the system's phone book will be displayed. When you touch "Start", the starting route guidance screen will be displayed. Touch "Save Changes". INFORMATION CHANGING THE ENTRY NAME ● This function cannot be operated while driving. ● If an entry - 2013 Toyota 4Runner | Owners Manual - Page 173
The USB/AUX port is located on the instrument panel, or in the console box or glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". The following screen will be displayed while sending the data. 2 Press the "SETUP - 2013 Toyota 4Runner | Owners Manual - Page 174
the vehicle icon. (See page 62.) 2 1 Touch "Options". APPLICATION-"Map" 2 Touch "Map Settings". Touch to change the screen to "Day" or "Night". (See page 63.) Touch to change the estimated time between "Arrival Time/Distance" and "Remaining Time/ Distance" to the destination. (See page 63 - 2013 Toyota 4Runner | Owners Manual - Page 175
5. NAVIGATION SETTING POIS ON MAP POI categories displayed on the map can be selected. VEHICLE ICONS The vehicle icon can be changed. 1 2 1 2 Touch "POIs on Map" on the "Map Settings" screen. Select the POI categories. Touch "Vehicle Icons" on the "Map Settings" screen. Touch the desired icon. - 2013 Toyota 4Runner | Owners Manual - Page 176
Touch "Arrival Information" on the "Map Settings" screen. Touch the desired item. APPLICATION-"Map" "Automatic": Touch to change the screen to day or night mode depending on the position of the headlight switch. "Day": Touch to always display the map in day mode. "Night": Touch to always display - 2013 Toyota 4Runner | Owners Manual - Page 177
Touch to display 3 routes (fastest, shortest and ecological) on the map after a route calculation. "Make a Round Trip": Touch to have the route automatically calculated back to the starting point after the set destination has been reached. Entered waypoints will also be considered on the way back to - 2013 Toyota 4Runner | Owners Manual - Page 178
5. NAVIGATION SETTING SETTING THE AVOIDANCE CRITERIA FOR THE ROUTE CALCULATION The avoidance criteria for the route calculation can be set. 2 1 2 Touch "Dest" on the map. Touch "Route Options". APPLICATION-"Map" The "Route Options" screen can be displayed by touching "Navigation" screens. on - 2013 Toyota 4Runner | Owners Manual - Page 179
be shown in the following cases: • When driving on a small angled Yshaped road. • When driving on a winding road. • When driving on a slippery road such as in sand, gravel, snow, etc. • When driving on a long straight road. • When motorway and surface streets run in parallel. • After moving by ferry - 2013 Toyota 4Runner | Owners Manual - Page 180
available for the next turn to the right or left. • It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. • After auto reroute, the route may not be changed ● This navigation system uses tire turning data and is designed to work with - 2013 Toyota 4Runner | Owners Manual - Page 181
Landestopographie.. All rights reserved. TERMS AND CONDITIONS PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTEQ DATABASE NOTICE TO THE USER THIS IS A LICENSE AGREEMENT AND NOT AN AGREEMENT FOR SALE - BETWEEN YOU AND NAVTEQ B.V. FOR YOUR COPY OF THE NAVTEQ NAVIGABLE MAP - 2013 Toyota 4Runner | Owners Manual - Page 182
costs, to be determined by NAVTEQ. TRANSFER OF LICENSE You may not transfer the Database to third parties, except when installed in the system for ; these criteria are available from NAVTEQ at your request. If the Database does not perform in accordance with this limited warranty, NAVTEQ will - 2013 Toyota 4Runner | Owners Manual - Page 183
NAVTEQ's liability for direct damages is limited to the price of your copy of the Database. THE LIMITED WARRANTY AND LIMITATION OF LIABILITY, SET FORTH IN THIS or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic - 2013 Toyota 4Runner | Owners Manual - Page 184
6. NAVIGATION SYSTEM INFORMATION 2 APPLICATION-"Map" 71 - 2013 Toyota 4Runner | Owners Manual - Page 185
6. NAVIGATION SYSTEM INFORMATION 72 - 2013 Toyota 4Runner | Owners Manual - Page 186
"Applications" menu screen. No. Function Press to display a list of applications. "Map" provides the user with navigation, route calculation, destination entry (manually or via voice recognition), turn by turn directions, and real-time traffic. Touch to view pictures stored on a USB memory. Touch - 2013 Toyota 4Runner | Owners Manual - Page 187
box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". INFORMATION ● All readable pictures on the device are displayed in chronological order. The slideshow will repeat when it is finished. ● The pictures will be changed - 2013 Toyota 4Runner | Owners Manual - Page 188
. : Touch to display the previous picture. : Touch to display the next picture. INFORMATION ● When the slideshow is playing, the pause and skip screen buttons disappear automatically after a few seconds. 76 - 2013 Toyota 4Runner | Owners Manual - Page 189
® capable phone can be downloaded. Before using this application, connect the Bluetooth® phone with phone profile. (See page 203.) CHECKING "Email" 1 Press the "APPS" button to display the "Applications" menu screen. 3 APPLICATION-THE OTHERS If the "Applications" - 2013 Toyota 4Runner | Owners Manual - Page 190
4 The text of the Email is displayed. : Touch to have the Email read out. To cancel this function, touch . NOTICE ● Do not turn off the engine while downloading. INFORMATION ● Email cannot be sent. 78 - 2013 Toyota 4Runner | Owners Manual - Page 191
notes from a connected Bluetooth® capable phone can be downloaded. Before using this application, connect the Bluetooth® phone with phone display the "Applications" menu screen. NOTICE ● Do not turn off the engine while downloading. If the "Applications" menu screen is not displayed, touch played - 2013 Toyota 4Runner | Owners Manual - Page 192
If the following screen is displayed when you use the Entune service, enter the login information. 1 Touch "enTune Username". When "Remember Password" is on, the entered user login information will be remembered for every login. ∗ : Entune is available in the 48 states, D.C. and Alaska. 80 - 2013 Toyota 4Runner | Owners Manual - Page 193
, an email address can be registered at http://www.toyota.com/ entune/. ● Entune operational procedures can also be confirmed by visiting http:// www.toyota.com/entune/. ● This system supports the following service. • Bluetooth® Specification Ver.1.1 or higher (Recommended: Ver.2.1 + EDR or higher - 2013 Toyota 4Runner | Owners Manual - Page 194
2. ENTUNE SERVICE AVAILABILITY OF SERVICE Entune is available in the 48 states, D.C. and Alaska. INFORMATION to their default settings: • Downloaded contents • Radio stations that were listened to • Input history INFORMATION ● When using Entune, depending on the details of your cellular phone - 2013 Toyota 4Runner | Owners Manual - Page 195
NAVIGATION FUNCTION USING ENTUNE SERVICE ONLINE SEARCH A destination can be selected via online search. Before using this function, connect a Bluetooth® phone with an internet profile. (See page 203.) 1 2 Touch "Dest" on the map. Touch "Enter Destination". When the cost warning or roaming - 2013 Toyota 4Runner | Owners Manual - Page 196
2. ENTUNE SERVICE 7 8 Touch "Enter Search Word". Input the search word and then touch "OK". 11 The starting route guidance screen will be displayed. (See page 42.) INFORMATION ● The color of indicates if online connection is active or not. After a timeout of 1 minute, an active online connection - 2013 Toyota 4Runner | Owners Manual - Page 197
2. ENTUNE SERVICE FUEL PRICES It enables the navigation system to display current fuel prices and gas station locations, which can be set as a destination if desired. Before using this function, connect a Bluetooth® phone with an internet profile. (See page 203.) 5 Touch for the desired item. 3 - 2013 Toyota 4Runner | Owners Manual - Page 198
ENTUNE SERVICE TRAFFIC MESSAGES It contains a list of traffic messages relating to the set route, all traffic messages and warnings. Before using this function, connect a Bluetooth Confirm Login Information". (See page 80.) When the cost warning or roaming warning screen is displayed, touch " - 2013 Toyota 4Runner | Owners Manual - Page 199
2. ENTUNE SERVICE On this screen, the following information is displayed. No. Information Street number Route segment If route segment is not available, information such as street name, city name, region or country will be displayed. : Icon of an incident : Icon of an incident on the route : Icon - 2013 Toyota 4Runner | Owners Manual - Page 200
2. ENTUNE SERVICE DETOURING A SEGMENT FROM A TRAFFIC MESSAGE LIST If a traffic message relates to the route being travelled, the desired segment can be detoured. 5 The route will be recalculated. The mark of the TMC on the "On Route" screen changes into . - 2013 Toyota 4Runner | Owners Manual - Page 201
2. ENTUNE SERVICE RECALCULATING THE ROUTE BY THE TRAFFIC MESSAGES You will be informed about relevant traffic messages on the route by a popup window. A pop-up window may differ depending on the traffic message settings. (See page 91.) If "Consider" is selected 2 Touch "Ignore" or "Detour". 3 - 2013 Toyota 4Runner | Owners Manual - Page 202
2. ENTUNE SERVICE TRAFFIC MESSAGE SETTINGS - 2013 Toyota 4Runner | Owners Manual - Page 203
2. ENTUNE SERVICE - 2013 Toyota 4Runner | Owners Manual - Page 204
2. ENTUNE SERVICE When the cost warning or roaming warning screen is displayed, touch "Continue". This function can be set to on or off. (See page 208.) " list on the "My Destinations" screen and "Contacts" screen. (See pages 52 and 165.) NOTICE ● Do not turn off the engine while downloading. 92 - 2013 Toyota 4Runner | Owners Manual - Page 205
USING ENTUNE SERVICE OPERATING AN APPLICATION Before using applications, connect the Bluetooth® phone with an internet profile. (See page 203.) If a Bluetooth® connection with an internet profile is not currently active, applications will be dimmed. OPENING/CLOSING AN APPLICATION When the cost - 2013 Toyota 4Runner | Owners Manual - Page 206
2. ENTUNE SERVICE DELETING AN APPLICATION 1 Touch . 2 Touch "Delete" on the right side of the application to be deleted. Applications that displayed "Delete" on the right side of the application can be removed. 3 The following confirmation screen will be displayed. Touch "Yes". 94 - 2013 Toyota 4Runner | Owners Manual - Page 207
transferring contacts." "There is a problem with the Bluetooth∗ connection. For troubleshooting assistance, please visit toyota.com or call 1-800-3314331." "This feature is unavailable during a handsfree call." To use the services, an active application needs to be running on your phone. For more - 2013 Toyota 4Runner | Owners Manual - Page 208
2. ENTUNE SERVICE 96 - 2013 Toyota 4Runner | Owners Manual - Page 209
3 APPLICATION-THE OTHERS 97 2. ENTUNE SERVICE - 2013 Toyota 4Runner | Owners Manual - Page 210
1. QUICK REFERENCE To access the audio system, press the "AUDIO" button. The audio system turns on in the last mode used. The actual design and button position may differ depending on the vehicle. For details, see Section 3 of "Owner's Manual". No. Name Audio screen Disc slot "Source" "TUNE - 2013 Toyota 4Runner | Owners Manual - Page 211
" knob button Function Press the " " or " " button to seek up or down for a station, or to access a desired track or file. Press to turn the audio system on and off, and turn to adjust the volume. Press to eject a disc. Page 107, 114, 119, 121, 124, 137 102 117 *: If equipped - 2013 Toyota 4Runner | Owners Manual - Page 212
may not pertain to your system. Your audio system works when the engine switch is turned to the "ACC" or "ON" position. TURNING THE AUDIO SYSTEM ON OR OFF CAUTION ● For vehicles sold in U.S.A. and Canada: Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not - 2013 Toyota 4Runner | Owners Manual - Page 213
OPERATION CONTROLS USING THE "TUNE SCROLL" KNOB Radio mode Radio stations can be tuned in manually using this knob. Modes other than radio Tracks, songs or files can be selected using the knob. SWITCHING AUDIO SOURCE 1 Press the "AUDIO" button. 4 The audio system turns on in the last mode used - 2013 Toyota 4Runner | Owners Manual - Page 214
1. AUDIO SYSTEM OPERATION DSP CONTROL With JBL sound system 1 2 Press the "AUDIO" button. Touch or . USB memory/iPod and Bluetooth® audio modes 4 Touch the desired screen button. AUTOMATIC SOUND LEVELIZER (ASL) The system adjusts to the optimum volume and tone quality according to vehicle - 2013 Toyota 4Runner | Owners Manual - Page 215
. 4 AUDIO SYSTEM 4 Touch the desired screen button. 1 2 Press the "AUDIO" button. Touch or . USB memory/iPod and Bluetooth® audio modes "Treble" "+" or "-": To adjust highpitched tones. "Mid" "+" or "-": To adjust mid-pitched tones. "Bass" "+" or "-": To adjust low-pitched tones. "Front" or - 2013 Toyota 4Runner | Owners Manual - Page 216
the frequency to the screen button. The station's frequency will be displayed in the screen button. The audio system turns on in the last mode used. 2 Touch "Source" on the screen. To change the preset station to a different one, follow the same procedure. 3 Touch "AM" or "FM" on the screen - 2013 Toyota 4Runner | Owners Manual - Page 217
program type, - display messages from radio stations, - search for a stronger signal station. RBDS features are available only when listening to an FM station that broadcasts RBDS information and the "FM info" indicator is on. SELECTING A DESIRED TYPE 4 AUDIO SYSTEM 1 Touch "Options". 107 - 2013 Toyota 4Runner | Owners Manual - Page 218
AUDIO SYSTEM OPERATION 2 Touch "TYPE >" or "< TYPE" to move forward and backward through the program list. TRAFFIC ANNOUNCEMENT A station that regularly broadcasts traffic information is automatically R&B (Rhythm and Blues) • Sports • Talk • Traffic (Not available when "HD Radio™ Settings" are set - 2013 Toyota 4Runner | Owners Manual - Page 219
, and a guide to available radio stations and programming, refer to www.hdradio.com. INFORMATION 1 Touch "Text". 2 Information such as the artist name, song title, album title and music genre being listened to are displayed on the text screen. 4 AUDIO SYSTEM 1 Touch "HD Radio" to turn - 2013 Toyota 4Runner | Owners Manual - Page 220
glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". Turn on the power of the iPod if it is not turned on. Once an iPod is connected, the music tag moves from the radio into the iPod. When the iPod is - 2013 Toyota 4Runner | Owners Manual - Page 221
signals at the moment. The digital multicast content is not available until HD Radio™ broadcast can be decoded and make the audio available. This takes up to 7 seconds. Data service issue by the radio broadcaster. AUDIO SYSTEM Audio mute delay when selecting an HD2/HD3 multicast channel preset - 2013 Toyota 4Runner | Owners Manual - Page 222
broadcast in the vehicle, a subscription to the XM® Satellite Radio service is necessary. An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and some Canadian provinces. HOW - 2013 Toyota 4Runner | Owners Manual - Page 223
Touch either "TYPE >" or "< TYPE" to go to the next or previous category. 4 AUDIO SYSTEM The audio system turns on in the last mode used. 2 Touch "Source" on the screen. PRESETTING A in the screen button. To change the preset channel to a different one, follow the same procedure. 113 - 2013 Toyota 4Runner | Owners Manual - Page 224
1. AUDIO SYSTEM OPERATION its related information appears on the right side of the screen. Manual tuning: Turn the "TUNE SCROLL" knob to select the next Press the " " or " " button of "SEEK/TRACK". The radio will change up or down to a channel within the current channel category. DISPLAYING THE - 2013 Toyota 4Runner | Owners Manual - Page 225
. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. ® 4 AUDIO SYSTEM No Signal Loading Ch Off Air ----- Ch Unavail INFORMATION ● Contact the XM - 2013 Toyota 4Runner | Owners Manual - Page 226
1. AUDIO SYSTEM OPERATION NOTICE ● This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This - 2013 Toyota 4Runner | Owners Manual - Page 227
. ● Never try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot. AUDIO SYSTEM EJECTING A DISC 1 Press the button. When a disc is correctly inserted into the slot, the CD player will automatically start playing from the first track or the - 2013 Toyota 4Runner | Owners Manual - Page 228
. If a CD-TEXT disc is inserted, the title of the track and disc currently being played will be displayed. The audio system turns on in the last mode used. : Touch to pause the track. : Touch to resume playing the track. When you touch , you can adjust sound - 2013 Toyota 4Runner | Owners Manual - Page 229
If appears to the right of titles, the complete titles are too long for the display. Touch this screen button to scroll to titles. AUDIO SYSTEM "SEEK/TRACK" button: Press the " " or " " of "SEEK/TRACK" button to select a desired track. "TUNE SCROLL" knob: Turn this knob to select a desired track - 2013 Toyota 4Runner | Owners Manual - Page 230
1. AUDIO SYSTEM OPERATION PLAYING REPEAT AND RANDOM ORDER PLAYING A MP3/WMA DISC (Repeat mode): Use it to automatically repeat the track you are currently listening to. The repeat mode changes as follows each time the screen button is touched. The title of the file and folder currently being - 2013 Toyota 4Runner | Owners Manual - Page 231
. Touch this screen button to scroll to titles. SELECTING A DESIRED FOLDER 1 Touch "Folders" on the screen. The folder list will be displayed. 4 AUDIO SYSTEM "SEEK/TRACK" button: Press the " " or " " of "SEEK/TRACK" button to select a desired file. "TUNE SCROLL" knob: Turn this knob to select - 2013 Toyota 4Runner | Owners Manual - Page 232
1. AUDIO SYSTEM OPERATION PLAYING REPEAT AND RANDOM ORDER (Repeat mode): Use it to automatically repeat the file or folder you are currently listening to. The repeat mode changes as follows each time the screen button is touched. :Repeating the file :Repeating the folder :OFF (Random mode): Use - 2013 Toyota 4Runner | Owners Manual - Page 233
versions, see page 145. ● This system supports MTP devices. The USB/AUX port is located on the instrument panel, or in the console box or glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". Turn on the power of the - 2013 Toyota 4Runner | Owners Manual - Page 234
1. AUDIO SYSTEM OPERATION SWITCHING TO USB OR iPod MODE PLAYING A USB MEMORY OR iPod PLAYING A SONG The title of the album, song and artist name of the song currently being listened to will be displayed. 1 Press the "AUDIO" button. - 2013 Toyota 4Runner | Owners Manual - Page 235
1. AUDIO SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 236
1. AUDIO SYSTEM OPERATION INFORMATION - 2013 Toyota 4Runner | Owners Manual - Page 237
creates a new playlist containing songs similar to the one currently being listened to. 1 Touch the cover art. 1 Touch "Play More Like This". 4 AUDIO SYSTEM 2 A list of all the songs from the album will be displayed. A pop-up window is displayed until the playlist is created. If you touch - 2013 Toyota 4Runner | Owners Manual - Page 238
1. AUDIO SYSTEM OPERATION 2 Touch "Play More Like This Settings". REPEAT AND RANDOM PLAY FUNCTIONS Repeat and random play functions are available. - 2013 Toyota 4Runner | Owners Manual - Page 239
1. AUDIO SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 240
insert foreign objects into the AUX port as this may damage the portable audio device or its terminal. The USB/AUX port is located on the instrument panel, or in the console box or glove box etc. The location and design are different depending on the vehicle. For details, see the Pictorial index of - 2013 Toyota 4Runner | Owners Manual - Page 241
used. Only the volume can be adjusted using the audio system controls. The remaining controls need to be operated on the portable audio device itself. When you touch , you can adjust sound settings. (See pages 104 and 105) 4 AUDIO SYSTEM 2 Touch "Source" on the screen. 3 Touch "AUX" on the - 2013 Toyota 4Runner | Owners Manual - Page 242
does not support Bluetooth®, the Bluetooth® audio system will not function. Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION CAUTION ● Do not operate the player's controls or connect to the Bluetooth® audio system while driving. ● Portable audio players must correspond - 2013 Toyota 4Runner | Owners Manual - Page 243
TO Bluetooth® AUDIO MODE 1 Press the "AUDIO" button. 4 AUDIO SYSTEM The audio system turns on in the last mode used. 2 Touch "Source" on the screen. 3 Touch "Bluetooth∗". If a Bluetooth® audio device is not connected, the connecting Bluetooth® audio screen will automatically appear - 2013 Toyota 4Runner | Owners Manual - Page 244
1. AUDIO SYSTEM OPERATION CONNECTING Bluetooth® AUDIO In order to use the Bluetooth® audio system, it is necessary to pair a portable player and connect the audio profile (A2DP) with the system. (In this manual, pairing refers to a Bluetooth® device connecting with the system. Connecting refers to - 2013 Toyota 4Runner | Owners Manual - Page 245
screen will be displayed. Touch "Connect for Music". 4 AUDIO SYSTEM Connectable Bluetooth® devices are listed on the display. 6 The following screen will be displayed. Once a portable player has been connected, it will be automatically connected whenever the engine switch is in the "ACC" or "ON - 2013 Toyota 4Runner | Owners Manual - Page 246
1. AUDIO SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 247
1. AUDIO SYSTEM OPERATION RECONNECTING Bluetooth® AUDIO If a portable player is disconnected due to poor reception from the Bluetooth® network when the engine switch is in the "ACC" or "ON" position, the system will automatically reconnect the portable player. If the Bluetooth device is - 2013 Toyota 4Runner | Owners Manual - Page 248
1. AUDIO SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 249
1. AUDIO SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 250
1. AUDIO SYSTEM OPERATION REPEAT AND RANDOM PLAY FUNCTIONS Repeat and random play functions are available. - 2013 Toyota 4Runner | Owners Manual - Page 251
song: Press the " " STEERING SWITCHES (WITH TWO DIRECTION STEERING SWITCH) 4 AUDIO SYSTEM The design and switch position may differ depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". Details of the specific switches, controls, and features are described below. No - 2013 Toyota 4Runner | Owners Manual - Page 252
be canceled. To change the preset page: The radio's preset page can be changed by pressing the " switch until you hear a beep. Bluetooth® audio player To select a desired song: Press design and switch position may differ depending on the vehicle. For details, see the Pictorial index of "Owner's Manual - 2013 Toyota 4Runner | Owners Manual - Page 253
OPERATION "MODE/HOLD" switch Press the "MODE/HOLD" switch to select an audio mode. Each press changes the mode sequentially if the desired mode is ready to use. To turn the audio system on, press the "MODE/HOLD" switch. Press and hold the "MODE/HOLD" switch until you hear a beep and the music - 2013 Toyota 4Runner | Owners Manual - Page 254
of course, radio signals have a limited range, and the farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio. AM Fading - 2013 Toyota 4Runner | Owners Manual - Page 255
2.0.4 1.3.1 1.1.3 1.0.4 AUDIO SYSTEM 1.0.2 1.0.0 iOS 3.1.3 4 iPod ABOUT iPod iPod nano 1G 3G 4G 5G 6G 1G 2G iPod touch 2009 (8GB) 3G 4G iPhone iPhone 3G iPhone iPhone 3GS iPhone 4 "Made for iPod" and "Made for iPhone" means that an electronic accessory has been designed to connect specifically to - 2013 Toyota 4Runner | Owners Manual - Page 256
class Audio CDs CARING FOR YOUR CD PLAYER AND DISCS Your CD player is intended for use with 4.7 in. (12 cm) discs only. To play 3 in. (8 cm) discs, use an adaptor. Extremely high temperatures can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before - 2013 Toyota 4Runner | Owners Manual - Page 257
and direct sunlight. 4 AUDIO SYSTEM NOTICE ● Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. ● This system is not designed for use of - 2013 Toyota 4Runner | Owners Manual - Page 258
1. AUDIO SYSTEM OPERATION MP3/WMA FILES MP3 (MPEG Audio Layer 3) and WMA (Windows Media Audio) are audio compression standards. The MP3/WMA player can play MP3 and WMA files on CD-ROM, CD-R and CDRW discs. The unit can play disc recordings - 2013 Toyota 4Runner | Owners Manual - Page 259
be played using the DDCD (Double Density CD) system. 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.mp3 005.wma Folder 3 006.mp3 4 AUDIO SYSTEM The play order of the compact disc with the of files in device: 9999 The order changes depending on the PC and MP3/WMA encoding software you use. 149 - 2013 Toyota 4Runner | Owners Manual - Page 260
1. AUDIO SYSTEM OPERATION TERMS PACKET WRITE This is a general term that describes the process of writing data on-demand to CDR, etc., in the same way that - 2013 Toyota 4Runner | Owners Manual - Page 261
for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. 4 AUDIO SYSTEM 151 - 2013 Toyota 4Runner | Owners Manual - Page 262
1. AUDIO SYSTEM OPERATION The Gracenote Software and each item of Gracenote Data are licensed to you "AS IS." Gracenote makes is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY - 2013 Toyota 4Runner | Owners Manual - Page 263
was last displayed is returned to display the "Phone" menu screen. "Phone" menu screen The actual design and button position may differ depending on the vehicle. For details, see Section 3 of "Owner's Manual". No. Function Touch to display the "Dial By Number" screen. A call can be made by dialing - 2013 Toyota 4Runner | Owners Manual - Page 264
on the steering wheel. "Dial By Number" screen 5 Bluetooth® HANDS-FREE SYSTEM No. Name Shortcut keys The Name of phone and provider Number keys Save the number screen button Delete button screen Function Touch the corresponding icon to change - 2013 Toyota 4Runner | Owners Manual - Page 265
may not be displayed depending on the phone. • If this information is not available from the connected phone, the icon will be shown with a question mark. The ● An antenna for the Bluetooth® connection is built into the instrument panel. The system may not function when you use the Bluetooth® phone - 2013 Toyota 4Runner | Owners Manual - Page 266
allows you to make or receive a call without taking your hands off the steering wheel by connecting your cellular phone. This system supports Bluetooth®. Bluetooth® is a wireless data system by which you can call without your cellular phone being connected with a cable or placed on a cradle. The - 2013 Toyota 4Runner | Owners Manual - Page 267
SWITCH The actual design and switch position may differ depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION ● This system supports the following service. • Bluetooth® Specification Ver.1.1 or - 2013 Toyota 4Runner | Owners Manual - Page 268
from the front speaker. When the received calls or received voice outputs, the audio from the audio system will be Driving on an unpaved road. (Due to traffic noise.) • Driving at high speed. • A window is open. • Turning the air-conditioning vents towards the microphone. • The sound of the air - 2013 Toyota 4Runner | Owners Manual - Page 269
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ● CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits with any other antenna or transmitter. 160 - 2013 Toyota 4Runner | Owners Manual - Page 270
to pair the phone and connect the phone's profile (HFP) with the system. (In this manual, pairing refers to a Bluetooth® device connecting with the system. Connecting refers to the paired device's profile(s) being connected to the system.) Once the profile has been connected, hands-free calls can be - 2013 Toyota 4Runner | Owners Manual - Page 271
will be displayed. Once the Bluetooth® phone has been connected, it will be automatically connected whenever the engine switch is in the "ACC" operation of your cellular phone, see the manual that comes with the cellular phone. If the device does not supports SSP (Secure Simple Pairing) Input the - 2013 Toyota 4Runner | Owners Manual - Page 272
1. BASIC INFORMATION BEFORE OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 273
poor reception from the Bluetooth® network when the engine switch is in the "ACC" or "ON" position, the system will automatically reconnect the Bluetooth® phone. If the Bluetooth® phone is disconnected on purpose, such as it was turned off, this does not happen. Reconnect it manually using either of - 2013 Toyota 4Runner | Owners Manual - Page 274
function cannot be operated while driving. REGISTERING FROM THE "Contacts" SCREEN 1 : Touch to delete one number. Touch and hold to continue deleting numbers. You can enter a number for each phone type. 5 Touch "Contacts". 5 6 Touch . Bluetooth® HANDS-FREE SYSTEM Input the entry name. The - 2013 Toyota 4Runner | Owners Manual - Page 275
(See pages 52 and 165.) You can also press the switch on the steering wheel to display the "Dial By Number" screen. REGISTERING FROM THE "Call History" vCard" formatted data can be transferred from a USB memory to this system. Transferred addresses and numbers will be stored in the "Stored" list - 2013 Toyota 4Runner | Owners Manual - Page 276
can be displayed by touching screens. on any of the "Phone" If there are 2 or more phone numbers, touch the desired number in the list. Bluetooth® HANDS-FREE SYSTEM 2 3 Touch "Speed Dials" on the "Contacts" screen. Touch the desired speed dial screen button the phone number is to be registered to - 2013 Toyota 4Runner | Owners Manual - Page 277
" screen. Entry options screen of the "Stored" and "Speed Dials" list INFORMATION ● "Rename XX" and "Edit Phone Numbers" cannot be operated while driving. CHANGING THE ENTRY NAME 1 Entry options screen of the "Phone Book" list Touch "Rename XX" on the entry options screen. Input the entry name - 2013 Toyota 4Runner | Owners Manual - Page 278
and hold to continue deleting numbers. You can edit a number for each phone type. 5 Bluetooth® HANDS-FREE SYSTEM 3 Touch . INFORMATION ● If an entry that is transferred from a cellular phone is edited, the change will affect the entry in the "Stored" list on the "My Destinations" screen and - 2013 Toyota 4Runner | Owners Manual - Page 279
a Bluetooth® phone has been connected, a call can be made using the hands-free system. There are several methods by which a call can be made. These are described below. 3 4 Touch . The connecting screen will be displayed. BY DIAL You can call by inputting the phone number. 1 Press the wheel - 2013 Toyota 4Runner | Owners Manual - Page 280
the phone book data of the connected cellular phone. The phone book changes depending on the phone connected. If a contact does not have phone book list. (See page 209.) 1 Touch "Contacts". 5 Bluetooth® HANDS-FREE SYSTEM The "Contacts" screen can be displayed 4 The connecting screen will - 2013 Toyota 4Runner | Owners Manual - Page 281
2. TELEPHONE OPERATION Touch "Search Contact" to search by the contact's name. This function cannot be operated while driving. Touch to display and edit the entry information. (See page 168.) BY SPEED DIALS You can call by "Speed Dial" number list. Registering number in - 2013 Toyota 4Runner | Owners Manual - Page 282
Calls can be made to a short message sender's phone number. (See page 179.) 5 2 Touch the desired list. 1 Touch "Call Sender". Bluetooth® HANDS-FREE SYSTEM "All": Touch to display all numbers (missed, received and dialed). "Missed": Touch to display missed calls. "Received": Touch to display - 2013 Toyota 4Runner | Owners Manual - Page 283
2. TELEPHONE OPERATION BY POI CALL Calls can be made to a POI when its details are displayed on the screen. (See pages 32 and 36.) 1 Touch . 2 The connecting screen will be displayed. To cancel the call, touch "End Call". 174 - 2013 Toyota 4Runner | Owners Manual - Page 284
wheel. switch on the steering The ongoing screen is displayed. (See page 176.) "Accept": Touch to talk on the phone. "Reject": Touch to reject the call. The layout of the incoming call screen may differ depending on the information available . Bluetooth® HANDS-FREE SYSTEM Single call 2 The - 2013 Toyota 4Runner | Owners Manual - Page 285
Bluetooth® phone, the ongoing screen is displayed. The operations outlined below can be performed on this screen. Single call NO. Function Touch to transfer the call. Touch "Transfer to Phone" to change on the information available from your phone. Touch to change parties. Touch to change to a - 2013 Toyota 4Runner | Owners Manual - Page 286
other party's voice. If "Dial Number" is selected 3 Input the number and then touch . 5 Bluetooth® HANDS-FREE SYSTEM The receiver volume can also be adjusted using the switch on the steering wheel. If "Dial From Contacts" is selected 3 Touch the desired method and then touch the desired - 2013 Toyota 4Runner | Owners Manual - Page 287
2. TELEPHONE OPERATION If "Dial From Call History" is selected - 2013 Toyota 4Runner | Owners Manual - Page 288
The state of a message is shown by the following icons. : New message : Read message : Unread message 5 4 The short message will be displayed. Bluetooth® HANDS-FREE SYSTEM This function can be set to "On" or "Off". (See page 209.) CHECKING RECEIVED SHORT MESSAGES On this screen, the following - 2013 Toyota 4Runner | Owners Manual - Page 289
. INFORMATION : Touch to have the short message read out. To cancel this function, touch . ● "Reply Free Text" cannot be selected while driving. CHECKING SENT SHORT MESSAGES SENDING A NEW SHORT MESSAGES 1 1 Touch "Messages" on the "Phone" menu screen. The "Messages" screen can be displayed - 2013 Toyota 4Runner | Owners Manual - Page 290
message will be sent. If a recipient is selected The short message will be sent immediately. INFORMATION 5 Bluetooth® HANDS-FREE SYSTEM ● "Create Message" cannot be selected while driving. "Enter Number", "Select Contact" and a list of former recipients will be displayed. If "Enter Number" is - 2013 Toyota 4Runner | Owners Manual - Page 291
3. SHORT MESSAGE FUNCTION CREATE A NEW SHORT MESSAGE 2 Edit the short message. - 2013 Toyota 4Runner | Owners Manual - Page 292
registered. 1 Touch "Prepare Template Message". 2 3 4 Input the short message. Touch "OK". The message is registered in the template list on the "Use Template" screen. INFORMATION 5 Bluetooth® HANDS-FREE SYSTEM ● This function is unavailable while driving. 183 - 2013 Toyota 4Runner | Owners Manual - Page 293
3. SHORT MESSAGE FUNCTION 184 - 2013 Toyota 4Runner | Owners Manual - Page 294
changed.(See "SELECTING A LANGUAGE" on page 198) MICROPHONE USING THE VOICE COMMAND SYSTEM The actual design and switch position may differ depending on the vehicle. For details, see the Pictorial index of "Owner's Manual". STEERING SWITCHES FOR THE VOICE COMMAND SYSTEM - 2013 Toyota 4Runner | Owners Manual - Page 295
windows are open. • Passengers are talking while voice commands are spoken. • The air conditioning speed is set high. • The air conditioning vents are turned towards the microphone. ● In the following conditions, the system may not recognize the command properly and using voice commands may not be - 2013 Toyota 4Runner | Owners Manual - Page 296
1. VOICE COMMAND SYSTEM OPERATION - 2013 Toyota 4Runner | Owners Manual - Page 297
The actual design and button position may differ depending on the vehicle. For details, see Section 3 of "Owner's Manual". The "Information" screen shown above is displayed if the vehicle is equipped with both a fuel consumption and a tire pressure warning system. No. Name "Fuel Consumption"* "Tire - 2013 Toyota 4Runner | Owners Manual - Page 298
1. VEHICLE INFORMATION 2. FUEL CONSUMPTION∗ FUEL CONSUMPTION (VEHICLES WITH HYBRID SYSTEM) Fuel consumption such as shown below can be displayed on the screen. For details see Section 1-1 of "Owner's Manual". Energy monitor Trip consumption History If the "Trip Information" screen is not displayed, - 2013 Toyota 4Runner | Owners Manual - Page 299
"History" screen is not displayed, touch "History". No. Name Previous fuel economy record Current fuel economy Best recorded fuel economy The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last reset. "Clear": Past record data can - 2013 Toyota 4Runner | Owners Manual - Page 300
screen in addition to a warning indication on the meter if tire pressure becomes low. For information on the tire pressure warning system, refer to "Owner's Manual". 2 Touch "Tire Pressure". 3 The tire pressure value of each tire will be displayed. Type A To confirm tire pressure values, touch - 2013 Toyota 4Runner | Owners Manual - Page 301
1. VEHICLE INFORMATION 194 - 2013 Toyota 4Runner | Owners Manual - Page 302
phone sound, phone book, etc. Press this button to display the "Setup" screen. Settings are available for vehicle customization. Settings are available for HD Radio™ system. Page 197 "Bluetooth*" 202 "Display" "Phone" "SETUP" button "Vehicle" "Audio" 200 209 197, 200, 202, 209, 210, 211 211 210 - 2013 Toyota 4Runner | Owners Manual - Page 303
SETTINGS Settings are available for language selection, operation sounds, etc. SCREENS FOR GENERAL SETTINGS 1 Press the "SETUP" button. 2 Touch "General". 3 Touch the items to be set. 8 On this screen, the following functions are operational. No. Function You can change the language. (See - 2013 Toyota 4Runner | Owners Manual - Page 304
1. SETUP OPERATION No. Function Touch to change a keyboard layout. (See "SELECTING A KEYBOARD LAYOUT" MEMORY" on page 60.) "vCard" formatted data can be transferred from a USB memory to this system. Transferred addresses and numbers will be stored in the "Stored" list on the "My Destinations" - 2013 Toyota 4Runner | Owners Manual - Page 305
data can be deleted or returned to their default settings: • Phone book data • Call history data • Speed dial data • Bluetooth® devices data • Phone sound setting • Bluetooth® setting • Sound setting "QWERTY": Latin characters, "QWERTY"-Layout "ABC": Latin characters, "ABC"-Layout 8 SETUP 199 - 2013 Toyota 4Runner | Owners Manual - Page 306
the "Setup" screen. Touch "Screen Off". 1 Press the "SETUP" button. 2 Touch "Display". The display screen will be turned off. To turn it on, press the "AUDIO", "CAR" or "SETUP" button. 3 Touch the items to be set. Please refer to the following pages for each setting. 200 - 2013 Toyota 4Runner | Owners Manual - Page 307
"Contrast" or "Brightness" using the or . ● If the screen is set in day mode with the headlight switch turned on, this condition is memorized even with the engine turned off. 8 SETUP 5 Adjust the contrast or brightness using the "+" or "-". Screen button "Contrast" "+" "Contrast" "-" Function - 2013 Toyota 4Runner | Owners Manual - Page 308
® function switched on or off. can be 1 Touch "Bluetooth∗". 2 Touch "Bluetooth∗". 2 Touch "On" or "Off". INFORMATION 3 The following screen will be displayed. ● When Bluetooth® function is off, "Search for Bluetooth∗ Devices", "Make Discoverable", "Paired Device List", "Set PIN for Pairing - 2013 Toyota 4Runner | Owners Manual - Page 309
can be connected to any of its supported profiles such as phone, music and/or internet. CONNECTING FROM THE SYSTEM 3 Touch the device to be paired. Connectable Bluetooth® devices will be displayed in the list. 1 Touch "Search for Bluetooth∗ Devices". 4 The following screen will be displayed - 2013 Toyota 4Runner | Owners Manual - Page 310
to connect the internet profile. The screen will be changed to the login process. (See page 205.) "Connect All": Touch to connect all supported profiles. Once you have connected the Bluetooth® device, it is automatically connected whenever the engine switch is in the "ACC" or "ON" position. 204 - 2013 Toyota 4Runner | Owners Manual - Page 311
Touch "Make Discoverable". 1 Touch "Connect for Internet". When a Bluetooth® device is currently connected, a pop-up window is displayed. To when making the first connection. 3 Confirm the PIN. If the device supports SSP (Secure Simple Pairing) Confirm the PIN displayed on the screen, and - 2013 Toyota 4Runner | Owners Manual - Page 312
can be paired at the same time. User login information can be changed on this screen. INFORMATION 1 Touch "Paired Device List". ● When making tone of the icons show which profiles the device supports. (Dimmed icons are not available.) The device's currently connected profiles are highlighted. - 2013 Toyota 4Runner | Owners Manual - Page 313
THE DEVICE NAME SETTING PIN To change the PIN. 1 2 3 Touch "Rename XX". Input the device name. Touch "OK". 1 Touch "Set PIN for Pairing". or disconnected. A 4 to 8-digit PIN can be selected. 3 "Connect All": Touch to connect all supported profiles. "Disconnect All": Touch to disconnect all - 2013 Toyota 4Runner | Owners Manual - Page 314
settings. No. Function Touch to turn the automatic download of addresses function on or off. Touch to turn the show cost warning function on or off. When this function is activated, a pop-up window will be displayed before using Entune service. Touch to turn the show roaming warning function - 2013 Toyota 4Runner | Owners Manual - Page 315
screen, the following functions can be set. No. Function Touch to select a ringtone. No ringtone, the phone's ringtone and the system's 4 ringtones are available for selection. Touch to turn the incoming short message announcement function "On" or "Off". Touch to turn the incoming Email announcement - 2013 Toyota 4Runner | Owners Manual - Page 316
1. SETUP OPERATION 6. AUDIO SETTINGS HD Radio™ system can be set using the following procedure: 4 Select the desired setting from "HD Radio/Analog Setting". 1 Press the "SETUP" button. Screen button "All" Function Touch to receive both analog and digital broadcasts. Touch to receive only - 2013 Toyota 4Runner | Owners Manual - Page 317
" button. 2 Touch "Vehicle". 3 Touch the desired items to be set. 8 SETUP For a list of the settings that can be changed, see "Owner's Manual". 4 After changing the settings, touch "Save". A message indicating that the settings are being saved will appear. Do not perform any other operations - 2013 Toyota 4Runner | Owners Manual - Page 318
1. SETUP OPERATION 212 - 2013 Toyota 4Runner | Owners Manual - Page 319
check the vehicle surrounding area, because the guide lines are ancillary lines. ● The guide lines are ancillary lines and do not change even if the steering wheel is turned. 1 To display the rear view image on the screen, the shift lever is in the "R" position when the engine switch is in the "ON - 2013 Toyota 4Runner | Owners Manual - Page 320
ft. (0.5 m) behind on the ground of the rear bumper of the vehicle. Vehicle center guide lines (blue) These lines indicate the estimated vehicle center on the ground. 9 INFORMATION ● If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud adhere to the - 2013 Toyota 4Runner | Owners Manual - Page 321
according to vehicle orientation or road conditions. THE REAR VIEW MONITOR SYSTEM CAMERA The rear view monitor system camera is located as shown in the illustration. Corners of bumper INFORMATION ● The area detected by the camera is limited. The camera does not detect objects which are close to - 2013 Toyota 4Runner | Owners Manual - Page 322
when the system is functioning. snow or mud) is adhering to the camera • When the camera has scratches or dirt on it • When the sun or the beam of headlights is shining directly into the camera lens ● When the camera is used under fluorescent lights, sodium lights, or mercury lights etc., the lights - 2013 Toyota 4Runner | Owners Manual - Page 323
MONITOR SYSTEM 2. DRIVING PRECAUTIONS (WITH REAR VIEW MONITOR GUIDE LINES) In any of the following situations, there is a margin of error between the guide lines appear to be farther away than they actually are. When any part of the vehicle sags due to the number of passengers or the distribution of - 2013 Toyota 4Runner | Owners Manual - Page 324
1. REAR VIEW MONITOR SYSTEM Approx. 1.5 ft. (0.5 m) The distance that appears on the screen between three-dimensional objects (such as vehicles) and flat surfaces ( 1.5 ft. (0.5 m) away. However, in reality if you back up to point , you will hit the truck. REAR VIEW MONITOR SYSTEM 219 - 2013 Toyota 4Runner | Owners Manual - Page 325
1. REAR VIEW MONITOR SYSTEM 220 - 2013 Toyota 4Runner | Owners Manual - Page 326
driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving experience. 4 Maintenance and care Cleaning and protecting your vehicle, performing do-ityourself maintenance, and maintenance information. 5 When trouble - 2013 Toyota 4Runner | Owners Manual - Page 327
this manual are to make changes at any fuel evaporation leakage check and, it does not indicate a malfunction. Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available problems resulting from the - 2013 Toyota 4Runner | Owners Manual - Page 328
fuel injection system/sequential multiport fuel injection system ● Cruise control system ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or special instructions if the vehicle is leased • In response to - 2013 Toyota 4Runner | Owners Manual - Page 329
services, please refer to the Safety Connect Telematics Subscription Service air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems normal driving - 2013 Toyota 4Runner | Owners Manual - Page 330
party except when: • An agreement from the vehicle's owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your - 2013 Toyota 4Runner | Owners Manual - Page 331
CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 332
Symbols used throughout this manual Cautions & Notices CAUTION This is a warning against something which, if ignored, may cause death or serious injury to people. You are informed about what you - 2013 Toyota 4Runner | Owners Manual - Page 333
30 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 334
provided with the vehicle. Vehicles without a smart key system Master keys Operating the wireless remote control function (→P. 49) Valet key Key number plate Vehicles with a smart key system Electronic keys Operating the smart key system (→P. 35) • Operating the wireless remote control function - 2013 Toyota 4Runner | Owners Manual - Page 335
1-1. Key information Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push the release button and take the key out. After using the is depleted or the entry function does not operate properly, you will need the mechanical key. (→P. 625) 1 Before driving - 2013 Toyota 4Runner | Owners Manual - Page 336
1-1. Key information NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 337
by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) 1 Before driving Electronic key Electronic key Electronic key Electronic key CTH12AS053 Locks and unlocks the side doors (→P. 36) Locks, unlocks and opens the back - 2013 Toyota 4Runner | Owners Manual - Page 338
and locking the doors Unlocking and locking the side doors (front door handles only) Grip the handle to unlock the door. 3 seconds after the doors are locked. Touch the lock sensor (the indentation on the upper part of the door handle) to lock the doors. Opening the back door Press the back door - 2013 Toyota 4Runner | Owners Manual - Page 339
locking the back door Press the button to unlock the door. The back window can be opened by pressing and holding this button. (→P. 101) 1 Before driving Press the button to lock the door. The back window can be closed by pressing and holding this button. (→P. 101) 37 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 340
1-2. Opening, closing and locking the doors Antenna location and effective range - 2013 Toyota 4Runner | Owners Manual - Page 341
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 342
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 343
seconds An attempt was made to lock either front door by opening a door and putting the ENGINE START STOP" switch was in ACCESSORY mode.) Retrieve the electronic key from the vehicle and lock the doors again. Correction procedure 1 Before driving Exterior alarm sounds once for 5 seconds Interior - 2013 Toyota 4Runner | Owners Manual - Page 344
doors were unlocked with the mechanical key. The "ENGINE START STOP" switch was pressed two consecutive times without the electronic key being present. Correction procedure Interior alarm sounds once. Touch the electronic key to the "ENGINE START STOP" switch while depressing the brake pedal. - 2013 Toyota 4Runner | Owners Manual - Page 345
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 346
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 347
doors. ● The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock sensor on the lower part of the door handle. ● Fingernails may scrape against the door during operation of the door - 2013 Toyota 4Runner | Owners Manual - Page 348
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 349
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 350
1-2. Opening, closing and locking the doors CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 351
the driver's door. Pressing the button again within 3 seconds unlocks the other doors. 1 Before driving CTH12AS045 Opens the windows and moon roof (press and hold)* *: This Vehicles with a smart key system setting must be customized at your Toyota dealer. Locks all the doors Unlocks all the - 2013 Toyota 4Runner | Owners Manual - Page 352
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 353
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 354
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 355
1 -2 . Ope ning, c losing a nd loc k ing t he doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. - 2013 Toyota 4Runner | Owners Manual - Page 356
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 357
the door. 1 Vehicles without a smart key system The door cannot be locked if either of the front doors is open and the key is in the engine switch. Vehicles with a smart key system The door cannot be locked if the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, or the electronic key - 2013 Toyota 4Runner | Owners Manual - Page 358
Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or are unlocked when the driver's door is opened within 10 seconds after turning the engine switch to "ACC" or "LOCK". All the doors are unlocked when the driver's door is - 2013 Toyota 4Runner | Owners Manual - Page 359
following table. Use the same procedure to cancel the function. Function Shift lever position Driver's door lock switch position 1 Before driving CTH12AS016 Shift position linked door locking function Shift position linked door unlocking function Speed linked door locking function Driver's door - 2013 Toyota 4Runner | Owners Manual - Page 360
1-2. Opening, closing and locking the doors CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 361
Aut om at ic running boa rds ∗ The Automatic running boards are linked to the side door operations, extending and retracting when a side door is opened and closed. When a door is opened or closed, the board on the same side extends or retracts. 1 Before driving CTH12AS059 Opening a door: The - 2013 Toyota 4Runner | Owners Manual - Page 362
Turning off the Automatic running boards system Press "OFF" on the Automatic running boards switch to turn off the Automatic running boards system. On (Automatic mode) Off The orange line at the top of the switch illuminates to indicate that the Automatic running boards system is on. CTH12AS056 - 2013 Toyota 4Runner | Owners Manual - Page 363
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 364
1-2. Opening, closing and locking the doors CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 365
1 -2 . Ope ning, c losing a nd loc k ing t he doors Ba ck door The back door can be locked/unlocked and opened by the following procedures: - 2013 Toyota 4Runner | Owners Manual - Page 366
1-2. Opening, closing and locking the doors Rear step bumper The rear step bumper is intended for rear end protection and easier step-up loading. CTH12AS019 - 2013 Toyota 4Runner | Owners Manual - Page 367
1-2. Opening, closing and locking the doors - 2013 Toyota 4Runner | Owners Manual - Page 368
1-2. Opening, closing and locking the doors CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 369
the back door, it may suddenly shut again after being opened, causing someone's hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. 1 Before driving NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 370
. Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Front se at s Manual seat Seat position lever adjustment Vertical height adjustment lever (driver's side only) Seatback angle adjustment lever Lumber support adjustment switch (driver's side only) CTH13AS055 68 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 371
, steering wheel) Power seat Seat position switch adjustment 1 Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver's side only) Vertical height adjustment switch (driver's side only) Lumber support adjustment switch (driver's side only) Before driving CTH13AS010 - 2013 Toyota 4Runner | Owners Manual - Page 372
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 373
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 374
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Re a r se at s Vehicles without third row seats - 2013 Toyota 4Runner | Owners Manual - Page 375
1-3. Adjustable components (seats, mirrors, steering wheel) Vehicles with third row seats - 2013 Toyota 4Runner | Owners Manual - Page 376
1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the rear seats (vehicles without third row seats) - 2013 Toyota 4Runner | Owners Manual - Page 377
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 378
1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the second row seats (vehicles with third row seats) - 2013 Toyota 4Runner | Owners Manual - Page 379
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 380
1-3. Adjustable components (seats, mirrors, steering wheel) Moving a second row seat for access to the third row seats (vehicles with third row seats) - 2013 Toyota 4Runner | Owners Manual - Page 381
1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third row seats (vehicles with third row seats) - 2013 Toyota 4Runner | Owners Manual - Page 382
1-3. Adjustable components (seats, mirrors, steering wheel) STEP 3 Pull the lever to unlock the seatback and then fold the seatback down. CTH13AS027 From outside STEP 1 Pull the strap to fold down the - 2013 Toyota 4Runner | Owners Manual - Page 383
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 384
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 385
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) H e a d re st ra int s Head restraints are provided for all seats. - 2013 Toyota 4Runner | Owners Manual - Page 386
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 387
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 388
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Se at be lt s Make sure that all occupants are wearing their seat belts before driving the vehicle. - 2013 Toyota 4Runner | Owners Manual - Page 389
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 390
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 391
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 392
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failure to do so may cause death or serious injury. - 2013 Toyota 4Runner | Owners Manual - Page 393
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 394
1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 395
a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) St e e ring w he e l The steering wheel can be adjusted to a comfortable position. STEP 1 Hold the steering wheel and push the lever down. 1 Before driving CTH13AS007 STEP 2 Adjust to the ideal position by moving the steering - 2013 Toyota 4Runner | Owners Manual - Page 396
to detect the headlights of vehicles behind and the reflected light is automatically reduced. Turns automatic mode on/off The indicator comes on when automatic mode is turned on. Vehicles without a smart key system The mirror will revert to the automatic mode each time the engine switch is turned - 2013 Toyota 4Runner | Owners Manual - Page 397
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. 1 Before driving CTH13AS074 - 2013 Toyota 4Runner | Owners Manual - Page 398
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Out side re a r vie w m irrors Mirror angle can be adjusted using the switch. STEP 1 To select a mirror to adjust, press the switch. Left Right CTH13AS004 STEP 2 To adjust the mirror, press the switch. Up Right Down - 2013 Toyota 4Runner | Owners Manual - Page 399
1-3. Adjustable components (seats, mirrors, steering wheel) - 2013 Toyota 4Runner | Owners Manual - Page 400
1 -4 . Ope ning a nd c losing t he w indow s a nd m oon roof Pow e r w indow s The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing* Opening One-touch opening* *: Pushing CTH14AS010 the switch in the opposite - 2013 Toyota 4Runner | Owners Manual - Page 401
1-4. Opening and closing the windows and moon roof - 2013 Toyota 4Runner | Owners Manual - Page 402
1-4. Opening and closing the windows and moon roof STEP 3 Hold the power window switch in the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed. If you release the switch while the window is moving, start again from the beginning - 2013 Toyota 4Runner | Owners Manual - Page 403
can be opened and closed using the switch or key. From inside the vehicle Closing One-touch closing* Opening One-touch opening* 1 Before driving *: Pressing the switch in the opposite direction will stop window travel partway. CTH14AS019 From outside the vehicle (vehicles without a smart key - 2013 Toyota 4Runner | Owners Manual - Page 404
1-4. Opening and closing the windows and moon roof From outside the vehicle (vehicles with a smart key system) Opening (push and hold) Closing (push and hold) This operation can only be performed when the electronic key is within the detection range. CTH14AS018 - 2013 Toyota 4Runner | Owners Manual - Page 405
1-4. Opening and closing the windows and moon roof - 2013 Toyota 4Runner | Owners Manual - Page 406
1-4. Opening and closing the windows and moon roof If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. - 2013 Toyota 4Runner | Owners Manual - Page 407
1 -4 . Ope ning a nd c losing t he w indow s a nd m oon roof M oon roof ∗ Use the overhead switches to open and close the moon roof and tilt it up and down. - 2013 Toyota 4Runner | Owners Manual - Page 408
1-4. Opening and closing the windows and moon roof - 2013 Toyota 4Runner | Owners Manual - Page 409
1-4. Opening and closing the windows and moon roof - 2013 Toyota 4Runner | Owners Manual - Page 410
1-4. Opening and closing the windows and moon roof - 2013 Toyota 4Runner | Owners Manual - Page 411
1 -5 . Re fue ling Ope ning t he fue l t a nk c a p Perform the following steps to open the fuel tank cap: - 2013 Toyota 4Runner | Owners Manual - Page 412
1-5. Refueling STEP 3 Hang the fuel tank cap on the back of the fuel filler door. CTH15AS003 Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction. CTH15AS004 110 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 413
1-5. Refueling CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 414
1-5. Refueling NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 415
been canceled. Vehicles with a smart key system The indicator light flashes after the "ENGINE START STOP" switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the "ENGINE START STOP" switch has been turned to ACCESSORY or IGNITION ON mode to - 2013 Toyota 4Runner | Owners Manual - Page 416
1-6. Theft deterrent system - 2013 Toyota 4Runner | Owners Manual - Page 417
1-6. Theft deterrent system CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 418
1 -6 . T he ft de t e rre nt syst e m Ala r m ∗ The system sounds the alarm and flashes the lights when forced entry is detected. - 2013 Toyota 4Runner | Owners Manual - Page 419
1-6. Theft deterrent system - 2013 Toyota 4Runner | Owners Manual - Page 420
1-6. Theft deterrent system NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 421
Sa fe t y inform a t ion Corre c t driving post ure Drive with a good posture as follows: Sit upright and well so that the controls are easily operable. Adjust the tilt and telescopic positions of the steering wheel downward so the airbag is facing your chest. (→P. 93) Lock the head restraint in - 2013 Toyota 4Runner | Owners Manual - Page 422
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 423
belts to help reduce the risk of death or serious injury. 1 Before driving CTH17AS103 SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front passenger from impact with interior components SRS knee airbags Can help provide driver and - 2013 Toyota 4Runner | Owners Manual - Page 424
Safety information SRS airbag system components CTH17AS155 Side airbags "AIR BAG ON" and "AIR BAG OFF" indicator lights Curtain shield airbags Front passenger airbag Knee airbags Side and curtain shield airbag sensors Seat belt pretensioners and force limiters Front airbag sensors Airbag sensor - 2013 Toyota 4Runner | Owners Manual - Page 425
Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc. shown in the system components diagram above. This information includes - 2013 Toyota 4Runner | Owners Manual - Page 426
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 427
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 428
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 429
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 430
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 431
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 432
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 433
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 434
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 435
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 436
the curtain shield airbags and seat belt pretensioners will turn back on automatically each time the engine switch is turned to the "ON" position. Vehicles with a smart key system: The "RSCA OFF" indicator comes on. (only when the "ENGINE START STOP" switch is in IGNITION ON mode). The roll sensing - 2013 Toyota 4Runner | Owners Manual - Page 437
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 438
front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. Type A Type B CTH17AS108 SRS warning light Front passenger's seat belt reminder light "AIR BAG OFF" indicator light "AIR - 2013 Toyota 4Runner | Owners Manual - Page 439
1-7. Safety information Condition and operation in the front passenger occupant classification system - 2013 Toyota 4Runner | Owners Manual - Page 440
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 441
1-7. Safety information - 2013 Toyota 4Runner | Owners Manual - Page 442
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 443
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 444
front passenger seat. ● Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child. ● For installation details, follow the instructions provided with the child restraint system. General installation instructions are provided in this manual. (→P. 146 - 2013 Toyota 4Runner | Owners Manual - Page 445
1-7. Safety information Forward facing - Convertible seat 1 Before driving CTH17AS144 Booster seat CTH17AS112 - 2013 Toyota 4Runner | Owners Manual - Page 446
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 447
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 448
1 -7 . Sa fe t y inform a t ion I nst a lling child re st ra int s Follow the child restraint system manufacturer's instructions. Firmly secure the child restraints using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt - 2013 Toyota 4Runner | Owners Manual - Page 449
Safety information Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver's seat belt) (→P. 86) 1 Before driving CTH17AS114 Vehicles without third row seats Anchor brackets (for top tether strap) An anchor bracket is provided for each rear seat. CTH17AS115 - 2013 Toyota 4Runner | Owners Manual - Page 450
1-7. Safety information Installation with LATCH system (rear/second row seats only) - 2013 Toyota 4Runner | Owners Manual - Page 451
a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. 1 Before driving Canada only CTH17AS118 - 2013 Toyota 4Runner | Owners Manual - Page 452
tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only CTH17AS086 Type B STEP 3 Latch the buckles onto the LATCH anchors. If the child restraint has a top tether - 2013 Toyota 4Runner | Owners Manual - Page 453
1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) - 2013 Toyota 4Runner | Owners Manual - Page 454
1-7. Safety information STEP 4 While pushing the child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check - 2013 Toyota 4Runner | Owners Manual - Page 455
pull the belt to check that it cannot be extended. 1 Before driving CTH17AS126 STEP 5 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (→P. 154) Place the child restraint system on the seat facing the front of the vehicle. - 2013 Toyota 4Runner | Owners Manual - Page 456
installed with a seat belt Push the buckle release button and fully retract the seat belt. CTH17AS048 Child restraint systems with a top tether strap STEP 1 Secure the child restraint system using a seat belt or the lower anchors, and remove the head restraint. CTH17AS129 154 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 457
1-7. Safety information STEP 2 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. 1 Make sure the top tether strap is securely latched. Before driving CTH17AS071 STEP 3 Replace the head restraint. CTH17AS130 - 2013 Toyota 4Runner | Owners Manual - Page 458
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 459
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 460
1-7. Safety information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 461
2 -1 . Driving proc e dure s Driving t he ve hicle The following procedures should be observed to ensure safe driving: - 2013 Toyota 4Runner | Owners Manual - Page 462
2-1. Driving procedures Starting off on a steep uphill STEP 1 Make sure that the parking brake is set and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. STEP 2 STEP 3 - 2013 Toyota 4Runner | Owners Manual - Page 463
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 464
the transmission. Engine braking is not available when N is selected. ● During normal driving, do not turn off the engine. Turning the engine off while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost. This will make it more difficult - 2013 Toyota 4Runner | Owners Manual - Page 465
procedures CAUTION ● Do not drive in excess of the speed limit. Even if the legal speed limit permits it, do not drive over 85 mph (140 km/h) unless your vehicle has highspeed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury. Be - 2013 Toyota 4Runner | Owners Manual - Page 466
2-1. Driving procedures CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 467
leave the vehicle unattended while the engine is running. ● Do not touch the exhaust pipes while the engine is running or immediately after turning the engine off. Doing so may cause burns. ● Do not leave the engine running in an area with snow build-up, or where it is snowing. If snowbanks build up - 2013 Toyota 4Runner | Owners Manual - Page 468
2-1. Driving procedures CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 469
2-1. Driving procedures NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 470
2-1. Driving procedures NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 471
2 -1 . Driving proc e dure s Engine (ignition) sw itch (vehicles w ithout a smart key system) - 2013 Toyota 4Runner | Owners Manual - Page 472
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 473
2-1. Driving procedures CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 474
2 -1 . Driving proc e dure s Engine (ignition) sw itch (vehicles w ith a smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes "ENGINE START STOP" switch modes. - 2013 Toyota 4Runner | Owners Manual - Page 475
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 476
2-1. Driving procedures When stopping the engine with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the "ENGINE START STOP" switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure - 2013 Toyota 4Runner | Owners Manual - Page 477
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 478
2-1. Driving procedures CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 479
2-1. Driving procedures NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 480
2 -1 . Driving proc e dure s Aut om at ic t ra nsm ission Select a shift position appropriate for the driving conditions. - 2013 Toyota 4Runner | Owners Manual - Page 481
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 482
operated as follows: Non-Optitron type meter For upshifting For downshifting 2 When driving CTH21AS025 Optitron type meter For upshifting For downshifting CTH21AS015 The initial shift range in S mode is set automatically to "4" according to vehicle speed. However, the initial shift range may be - 2013 Toyota 4Runner | Owners Manual - Page 483
2-1. Driving procedures - 2013 Toyota 4Runner | Owners Manual - Page 484
used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. 2 When driving Lane change to the left (push and hold the lever partway) The left hand signals will - 2013 Toyota 4Runner | Owners Manual - Page 485
2 -1 . Driving proc e dure s Pa rk ing bra ke U.S.A. Canada To set the parking brake, fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) CTH21AS031 - 2013 Toyota 4Runner | Owners Manual - Page 486
2 -1 . Driving proc e dure s H or n To sound the horn, press on or close to the mark. CTH21AS022 2 When driving - 2013 Toyota 4Runner | Owners Manual - Page 487
2 -2 . I nst rum e nt c lust e r Ga uge s a nd m e t e rs Non-Optitron type meters Optitron type meters 186 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 488
minute Speedometer Displays the vehicle speed Display change button →P. 188 Engine coolant temperature gauge Displays the engine coolant temperature 2 When driving Fuel gauge Displays the quantity of fuel remaining in the tank Eco Driving Indicator Zone Display →P. 189 Odometer, trip meter - 2013 Toyota 4Runner | Owners Manual - Page 489
2-2. Instrument cluster Switching the display Items displayed can be switched by pressing the display change button. - 2013 Toyota 4Runner | Owners Manual - Page 490
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 491
to exceed Zone of Eco driving, the right of Eco Driving Indicator Zone Display will blink and Eco Driving Indicator Light will turn off. CTH22AS055 Average fuel consumption Displays the average fuel consumption since the function was reset. Pressing and holding the display change button will reset - 2013 Toyota 4Runner | Owners Manual - Page 492
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 493
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 494
r I ndic at ors a nd w a r ning light s The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle's various systems. Instrument cluster (non-Optitron type meters) 2 When driving CTH22AS068 Instrument cluster (Optitron type meters - 2013 Toyota 4Runner | Owners Manual - Page 495
2-2. Instrument cluster Center panel CTH22AS015 194 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 496
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 497
(if equipped) Intuitive parking assist indicator (→P. 221) Automatic running boards indicator (→P. 59) *1 *1, 2 (if equipped) *1: These lights turn on when the "ENGINE START STOP" switch is turned to IGNITION ON mode (vehicles with a smart key system) or the engine switch is turned to the "ON - 2013 Toyota 4Runner | Owners Manual - Page 498
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 499
2-2. Instrument cluster CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 500
Ac c e ssor y m e t e r The accessory meter presents the driver with a variety of drivingrelated data including the current outside air temperature. 2 When driving "MODE/ "SET/ " button " button Trip information (→P. 200) Displays driving range and average fuel consumption Outside temperature - 2013 Toyota 4Runner | Owners Manual - Page 501
2-2. Instrument cluster Trip information Items displayed can be switched by pressing the "MODE/ - 2013 Toyota 4Runner | Owners Manual - Page 502
control The daytime brightness of the accessory meter can be adjusted. STEP 1 STEP 2 STEP 3 Turn the headlight switch off. Press and hold the "MODE/ Press the "MODE/ " button. " button. 2 " or "SET/ Vehicles without Multi-terrain Select When driving Vehicles with Multi-terrain Select STEP - 2013 Toyota 4Runner | Owners Manual - Page 503
2-2. Instrument cluster - 2013 Toyota 4Runner | Owners Manual - Page 504
headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A The daytime running lights turn on. The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all the lights - 2013 Toyota 4Runner | Owners Manual - Page 505
and wipers Type B The headlights, parking lights, daytime running lights and so on turn on and off automatically (when the "ENGINE START STOP" switch is in IGNITION ON mode). The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. CTH23AS047 The - 2013 Toyota 4Runner | Owners Manual - Page 506
2-3. Operating the lights and wipers Type C The daytime running lights turn on. The side marker, parking, tail, license plate and instrument panel lights turn on. The headlights and all the lights listed above turn on. 2 When driving CTH23AS048 205 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 507
D The daytime running lights turn on. The headlights, parking lights, daytime running lights and so on turn on and off automatically (when the "ENGINE START STOP" switch is in IGNITION ON mode). The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on - 2013 Toyota 4Runner | Owners Manual - Page 508
2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off. When driving - 2013 Toyota 4Runner | Owners Manual - Page 509
2-3. Operating the lights and wipers - 2013 Toyota 4Runner | Owners Manual - Page 510
2 -3 . Ope ra t ing t he light s a nd w ipe rs Fog light sw it ch The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. Type A Turns the front fog lights off Turns the front fog lights on 2 When driving CTH23AS041 209 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 511
2-3. Operating the lights and wipers Type B Turns the front fog lights off Turns the front fog lights on CTH23AS010 - 2013 Toyota 4Runner | Owners Manual - Page 512
Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation 2 When driving CTH23AS042 Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency CTH23AS043 211 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 513
2-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. CTH23AS044 Type B Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary - 2013 Toyota 4Runner | Owners Manual - Page 514
2-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. CTH23AS029 2 When driving - 2013 Toyota 4Runner | Owners Manual - Page 515
2 -3 . Ope ra t ing t he light s a nd w ipe rs Re a r w indow w ipe r a nd w a she r Before operating Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The wiper will automatically operate a couple of times after the washer squirts. (After operating several times, - 2013 Toyota 4Runner | Owners Manual - Page 516
2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The wiper will automatically operate a couple of times after the washer squirts. (After operating several times, the wiper operates - 2013 Toyota 4Runner | Owners Manual - Page 517
2-3. Operating the lights and wipers - 2013 Toyota 4Runner | Owners Manual - Page 518
2 -4 . U sing ot he r driving syst e m s Cruise c ont rol Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch 2 When driving CTH24AS001 - 2013 Toyota 4Runner | Owners Manual - Page 519
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 520
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 521
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 522
ot he r driving syst e m s I nt uit ive pa rk ing a ssist ∗ The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via an indicator and a buzzer. Always check the surrounding area when using this system. - 2013 Toyota 4Runner | Owners Manual - Page 523
2-4. Using other driving systems The indicator and buzzer When a sensor detects an obstacle, the direction of the obstacle is indicated and the buzzer sounds. - 2013 Toyota 4Runner | Owners Manual - Page 524
driving systems Detection range of the sensors Approximately 1.6 ft. (50 cm) Approximately 4.9 ft. (150 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obstacles that are extremely close to the vehicle. The range of the sensors may change depending - 2013 Toyota 4Runner | Owners Manual - Page 525
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 526
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 527
2 -4 . U sing ot he r driving syst e m s Rear view monitor system (rear view mirror-attached type) ∗ The rear view monitor assists the driver by displaying an image of the area behind the vehicle while reversing. The - 2013 Toyota 4Runner | Owners Manual - Page 528
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 529
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 530
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 531
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 532
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 533
2-4. Using other driving systems The distance that appears on the screen between three-dimensional objects (such as vehicles) and flat surfaces (such as the road) and the actual distance - 2013 Toyota 4Runner | Owners Manual - Page 534
2-4. Using other driving systems ● The sun or headlights are shining directly into the camera lens. ● A bright object such as a white wall is reflected in the mirror surface over the monitor. - 2013 Toyota 4Runner | Owners Manual - Page 535
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 536
2-4. Using other driving systems NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 537
heel drive system (part-time 4WD models) Use the front-wheel drive control lever or switch to select the following transfer modes: Type A CTH24AS015 The four-wheel drive indicator comes on when H4, N or L4 mode is selected. H2 (high speed position, two-wheel drive) Use this for normal driving on - 2013 Toyota 4Runner | Owners Manual - Page 538
on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear. H4 (high speed position, four-wheel drive) Use this for driving only on tracks that permit the tires slide, like offroad, icy or snow-covered roads. This position provides greater traction than two - 2013 Toyota 4Runner | Owners Manual - Page 539
2-4. Using other driving systems Shifting between H2 and H4 - 2013 Toyota 4Runner | Owners Manual - Page 540
2-4. Using other driving systems Shifting between H4 and L4 - 2013 Toyota 4Runner | Owners Manual - Page 541
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 542
-t im e 4 WD m ode ls) Use the four-wheel drive control switch to select the following transfer modes: 2 When driving CTH24AS016 H4F (high speed position) Use this for normal driving on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear. H4L (high speed - 2013 Toyota 4Runner | Owners Manual - Page 543
2-4. Using other driving systems Shifting between H4F and H4L Push the "UNLOCK" button and turn the four-wheel drive control switch to H4L or H4F. This can be done at any speed. The center differential lock indicator will turn on (H4L) or go off (H4F). CTH24AS017 Shifting between H4L and L4L - 2013 Toyota 4Runner | Owners Manual - Page 544
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 545
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 546
2 -4 . U sing ot he r driving syst e m s Ac t ive t ra c t ion c ont rol syst e m ∗ The active traction control system automatically helps prevent the spinning of 4 wheels when the vehicle is started or accelerated on slippery road surfaces. - 2013 Toyota 4Runner | Owners Manual - Page 547
2-4. Using other driving systems When the active traction control system is operating If all wheels spin, the slip indicator flashes to indicate that the active traction control system has been engaged. CTH24AS047 - 2013 Toyota 4Runner | Owners Manual - Page 548
. U sing ot he r driving syst e m s AU TO LSD syst e m (2 WD m ode ls) The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when wheel spinning occurs in a ditch or - 2013 Toyota 4Runner | Owners Manual - Page 549
2-4. Using other driving systems When the AUTO LSD system is operating If the rear wheels spin, the slip indicator flashes to indicate that the AUTO LSD system has controlled the spinning of the rear wheels. CTH24AS047 - 2013 Toyota 4Runner | Owners Manual - Page 550
2-4. Using other driving systems NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 551
ot he r driving syst e m s Re a r diffe re nt ia l lock syst e m ∗ The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rear wheels is spinning. Press - 2013 Toyota 4Runner | Owners Manual - Page 552
the vehicle, shift the shift lever to N and shift the frontwheel drive control lever into L4 to see if this is sufficient. If this has no effect, additionally use the rear differential lock system. Be sure the wheels have stopped spinning. Press the rear differential lock switch. Gently depress the - 2013 Toyota 4Runner | Owners Manual - Page 553
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 554
2 -4 . U sing ot he r driving syst e m s Dow nhill a ssist c ont rol syst e m ∗ With the downhill assist control system, the vehicle is able to descend a steep hill while maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation. - 2013 Toyota 4Runner | Owners Manual - Page 555
2-4. Using other driving systems While the downhill assist control system is operating The slip indicator will flash to indicate that the downhill assist control system is operating, and the stop lights and high mounted stoplight will turn on. CTH24AS047 - 2013 Toyota 4Runner | Owners Manual - Page 556
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 557
2 -4 . U sing ot he r driving syst e m s Cra w l Cont rol ∗ Allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. Minimizes loss of traction or vehicle slip when driving on slippery road surfaces, allowing for stable driving. - 2013 Toyota 4Runner | Owners Manual - Page 558
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 559
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 560
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 561
mode is selected in accordance with terrain conditions, engine power and active traction control system is controlled to enhance off-road drivability. Additionally, guidance messages such as transfer mode selection advice are displayed on the accessory meter to assist the driver in operating the - 2013 Toyota 4Runner | Owners Manual - Page 562
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 563
2-4. Using other driving systems The following table shows some typical terrains and the recommended Multi-terrain Select modes. Mode Road condition Rock Mogul Bump, groove Slope/ V-ditch Uphill/ downhill Riverbed Gravel Bush Deep snow Sand Mud Dirt ROCK MOGUL LOOSE ROCK MUD & SAND - 2013 Toyota 4Runner | Owners Manual - Page 564
2 When driving STEP 2 Turn the dial to select the desired mode. The indicator of the selected mode will come on and the applicable road conditions will be displayed on the accessory meter. If the mode indicator flashes, Multi-terrain Select cannot be operated. Follow the instructions displayed on - 2013 Toyota 4Runner | Owners Manual - Page 565
or L4. Indicates that the transfer mode needs to be changed to L4. Procedure Shift the front-wheel drive control lever or switch to H4 or L4. Shift the front-wheel drive control lever or switch to L4. Indicates that the transfer mode cannot be changed to H4 or L4. Indicates that the transfer mode - 2013 Toyota 4Runner | Owners Manual - Page 566
Select cannot be operated because the VSC and/or 4WD system may be malfunctioning. Procedure CANNOT BE SELECTED (When pressing the switch) Multi-terrain Select NOT AVAILABLE (When pressing the "ON/OFF" switch) 2 Turn Crawl Control off. When driving - Contact your Toyota dealer. - 2013 Toyota 4Runner | Owners Manual - Page 567
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 568
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 569
2 -4 . U sing ot he r driving syst e m s Driving a ssist syst e m s To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too - 2013 Toyota 4Runner | Owners Manual - Page 570
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 571
2-4. Using other driving systems Disabling the TRAC/VSC systems (2WD models) If the vehicle gets stuck in fresh snow or mud, the TRAC/VSC systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. - 2013 Toyota 4Runner | Owners Manual - Page 572
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 573
2-4. Using other driving systems Disabling the TRAC/VSC systems (4WD models) If the vehicle gets stuck in fresh snow or mud, the TRAC/VSC systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. - 2013 Toyota 4Runner | Owners Manual - Page 574
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 575
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 576
2-4. Using other driving systems - 2013 Toyota 4Runner | Owners Manual - Page 577
2-4. Using other driving systems CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 578
Driving inform a t ion Off-roa d pre c a ut ions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height the higher ground clearance is a better view of the road allowing you to anticipate problems. ● It is not designed for - 2013 Toyota 4Runner | Owners Manual - Page 579
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 580
private property. ● Do not enter areas that are closed. Honor gates, barriers and signs that restrict travel. ● Stay on established roads. When conditions are wet, driving techniques should be changed or travel delayed to prevent damage to roads. 2 When - 2013 Toyota 4Runner | Owners Manual - Page 581
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 582
2-5. Driving information NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 583
, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ● To maintain vehicle balance while driving, position luggage evenly within the luggage compartment. ● For better fuel economy, do not carry unnecessary weight - 2013 Toyota 4Runner | Owners Manual - Page 584
2-5. Driving information Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit⎯ (1)Locate the statement "The combined weight of occupants and cargo should - 2013 Toyota 4Runner | Owners Manual - Page 585
Driving information Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 638) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. (kg), the available - 2013 Toyota 4Runner | Owners Manual - Page 586
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 587
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 588
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 589
2 -5 . Driving inform a t ion Ve hicle loa d lim it s Vehicle load limits include total load capacity, seating capacity, trailer weight rating and cargo capacity. - 2013 Toyota 4Runner | Owners Manual - Page 590
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 591
2 -5 . Driving inform a t ion Wint e r driving t ips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. - 2013 Toyota 4Runner | Owners Manual - Page 592
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 593
2-5. Driving information Selection tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain (0. - 2013 Toyota 4Runner | Owners Manual - Page 594
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 595
2-5. Driving information NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 596
Driving inform a t ion Tra ile r t ow ing Your vehicle is designed primarily as a passenger-and-load-carrying vehicle. Towing a trailer can have an adverse impact on handling, performance, braking, durability, and fuel systems (if equipped). To tow a trailer safely, use extreme care and drive the - 2013 Toyota 4Runner | Owners Manual - Page 597
2-5. Driving information Towing related terms - 2013 Toyota 4Runner | Owners Manual - Page 598
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 599
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 600
GAWR indicated on the Certification Label. 2 When driving CTH61AS002 ● If the gross trailer weight is over the unbraked TWR, trailer service brakes are required. ● If the gross trailer weight is over 2000 lb. (907 kg), a sway control device with sufficient capacity is required. 299 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 601
2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. - 2013 Toyota 4Runner | Owners Manual - Page 602
Gross trailer weight Tongue weight 2 When driving CTH25AS022 If using a weight distributing hitch when towing, return the front axle to the same weight as before the trailer connection. If front axle weight cannot be measured directly, measure the front fender height above the front axle before - 2013 Toyota 4Runner | Owners Manual - Page 603
2-5. Driving information Hitch Trailer hitch assemblies have different weight capacities. Toyota recommends the use of Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact - 2013 Toyota 4Runner | Owners Manual - Page 604
the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers are stamped with the required trailer ball size. Trailer class IV II and III I Typical trailer ball size 2 5/16 in. 2 in. 1 7/8 in. 2 When driving Shank length Protrudes beyond the - 2013 Toyota 4Runner | Owners Manual - Page 605
2-5. Driving information Positions for towing hitch receiver and hitch ball Weight carrying ball position: 50.1 in. (1272 mm) Hitch receiver pin hole position: 43.7 in. (1109 mm) CTH25AS026 Connecting trailer lights Use the wire harness stored in the rear end under body. CTH25AS011 - 2013 Toyota 4Runner | Owners Manual - Page 606
manual, whichever is lowest. Instability of the towing vehicle-trailer combination (trailer sway) increases as speed increases. Exceeding speed limits may cause loss of control. ● Before starting out, check the trailer lights the steering wheel and move guide vehicle and trailer length. ● Avoid - 2013 Toyota 4Runner | Owners Manual - Page 607
considerable distance. After passing a vehicle, do not forget the length of your trailer, and be sure you have plenty of room before changing lanes. ● To maintain engine braking efficiency and charging system performance when using engine braking, do not put the transmission in D. ● Instability - 2013 Toyota 4Runner | Owners Manual - Page 608
under both the vehicle's and trailer's wheels. When the wheel blocks are in place, release the brakes slowly until the blocks absorb the load. Apply the parking brake firmly. Shift into P and turn off the engine. 2 STEP 3 STEP 4 STEP 5 When driving ● When restarting after parking on a slope - 2013 Toyota 4Runner | Owners Manual - Page 609
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 610
2-5. Driving information - 2013 Toyota 4Runner | Owners Manual - Page 611
the tongue weight is appropriate, if possible. • Check the load in the vehicle. Make sure the vehicle is not overloaded after occupants get in. If you cannot find any problems, the speed at which trailer swaying occurred is beyond the limit of your particular vehicle-trailer combination. Drive at - 2013 Toyota 4Runner | Owners Manual - Page 612
control. This is especially true on wet or slippery surfaces. ● Do not exceed the trailer hitch assembly weight, gross vehicle weight, gross axle weight and trailer tongue weight capacities. ● Do not use cruise control when towing. ● Slow down and downshift before descending steep or long downhill - 2013 Toyota 4Runner | Owners Manual - Page 613
2-5. Driving information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 614
2 -5 . Driving inform a t ion Dinghy t ow ing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. 2 When driving NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 615
3 -1 . U sing t he a ir c ondit ioning syst e m a nd de fogge r M a nua l a ir c ondit ioning syst e m ∗ Outside/recirculated air mode button Air outlet selector knob Cooling and dehumidification function on/off button Fan speed control knob Temperature control knob Adjusting the settings - 2013 Toyota 4Runner | Owners Manual - Page 616
(warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the temperature control knob to "MAX A/C". The air conditioning will automatically turn on and, if an air outlet position other than or is selected, the - 2013 Toyota 4Runner | Owners Manual - Page 617
3-1. Using the air conditioning system and defogger Mainly air flows to the feet. CTH31AS006 Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. Pressing CTH31AS007 to turn the cool- ing and dehumidification function on - 2013 Toyota 4Runner | Owners Manual - Page 618
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 619
3-1. Using the air conditioning system and defogger Rear outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. CTH31AS016 - 2013 Toyota 4Runner | Owners Manual - Page 620
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 621
sing t he a ir c ondit ioning syst e m a nd de fogge r Aut om at ic a ir c ondit ioning syst e m ∗ Air outlets and fan speed are automatically adjusted according to the temperature setting. Driver's side temperature control dial Cooling and dehumidification function on/off button Fan speed display - 2013 Toyota 4Runner | Owners Manual - Page 622
3-1. Using the air conditioning system and defogger Using the automatic air conditioning system Press . STEP 1 The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. STEP 2 Turn clockwise to increases the - 2013 Toyota 4Runner | Owners Manual - Page 623
3-1. Using the air conditioning system and defogger Adjusting the settings manually - 2013 Toyota 4Runner | Owners Manual - Page 624
Using the air conditioning system and defogger Air flows to the upper body and feet. CTH31AS010 Mainly air flows to the feet. 3 Interior features CTH31AS011 Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. CTH31AS012 - 2013 Toyota 4Runner | Owners Manual - Page 625
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 626
or down. Turn the knob to open or close the vent. CTH31AS014 Front side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. 3 Interior features CTH31AS015 Rear outlets Direct air flow to the left or right, up or down. Turn the knob - 2013 Toyota 4Runner | Owners Manual - Page 627
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 628
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 629
3-1. Using the air conditioning system and defogger CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 630
with a manual air conditioning system Turns the defoggers on/off The defoggers will automatically turn off after their operation time. The operation time varies depending on the ambient temperature and vehicle speed. 3 Interior features Vehicles with an automatic air conditioning system Turns the - 2013 Toyota 4Runner | Owners Manual - Page 631
3-1. Using the air conditioning system and defogger - 2013 Toyota 4Runner | Owners Manual - Page 632
to prevent ice from building up on the windshield and wiper blades. Turns the windshield wiper deicer on/off The windshield wiper de-icer will automatically turn off after approximately 15 minutes. CTH31AS020 3 - 2013 Toyota 4Runner | Owners Manual - Page 633
3 -2 . U sing t he a udio syst e m Audio syst e m t ype s Without navigation system and Display Audio system Type A: CD player with changer controller and AM/FM radio Type B: CD player with changer controller and AM/FM radio 334 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 634
Using the audio system Type C: CD player with changer and AM/FM radio 3 Interior features Title Using the radio Using the CD player Playing MP3 and WMA discs Operating an iPod Operating a USB memory Optimal use of the audio system Using the AUX port Using the steering wheel audio switches Page - 2013 Toyota 4Runner | Owners Manual - Page 635
Using the audio system With Display Audio system Owners of models equipped with a Display Audio system should refer to the "Display Audio System Owner's Manual". With navigation system Owners of models equipped with a navigation system should refer to the "Navigation System Owner's Manual". 336 - 2013 Toyota 4Runner | Owners Manual - Page 636
3-2. Using the audio system Language settings (type B and C) The language used for all voice guidance, voice recognition and messages may be changed. STEP 1 STEP 2 STEP 3 STEP 4 Press Press Press Press guage. . (MORE). (LANG). or as corresponds to the desired lan- For vehicles sold in the U.S.A. - 2013 Toyota 4Runner | Owners Manual - Page 637
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 638
3-2. Using the audio system CAUTION: This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment - 2013 Toyota 4Runner | Owners Manual - Page 639
3-2. Using the audio system Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 640
(AM, FM mode) or channel Station selector (SAT mode) 3 Scanning for receivable stations AM⋅SAT/FM mode buttons Interior features Displaying radio text messages Changing the channel category Type B and C Power Volume Seeking a frequency Adjusting the frequency (AM, FM mode) or channel (SAT - 2013 Toyota 4Runner | Owners Manual - Page 641
Using the audio system Setting station presets (excluding XM® Satellite Radio) STEP 1 Search for desired stations by turning pressing "∧" or "∨" on . to or or STEP 2 Press and hold a button (from a beep. ) until you hear Type B and C: Each time is pressed, station pages are changed. There - 2013 Toyota 4Runner | Owners Manual - Page 642
3-2. Using the audio system XM® Satellite Radio (if equipped) - 2013 Toyota 4Runner | Owners Manual - Page 643
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 644
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 645
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 646
3-2. Using the audio system --or CHANNEL NOT AVAILABLE The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Contact the XM® Listener Care Center at 1-800- - 2013 Toyota 4Runner | Owners Manual - Page 647
3 -2 . U sing t he a udio syst e m U sing t he CD pla ye r Type A Power Volume CD eject Displaying text messages Selecting a track Rewinding Selecting a track Repeat play Random playback Searching playback Playback Fast-forwarding Type B and C Power Volume CD eject Displaying text messages - 2013 Toyota 4Runner | Owners Manual - Page 648
3-2. Using the audio system Loading CDs - 2013 Toyota 4Runner | Owners Manual - Page 649
3-2. Using the audio system Ejecting CDs - 2013 Toyota 4Runner | Owners Manual - Page 650
3-2. Using the audio system Scanning tracks STEP 1 Press . The first ten seconds of each track will be played. To cancel, press STEP 2 again. Press again when the desired track is reached. Selecting a CD (type C only) - 2013 Toyota 4Runner | Owners Manual - Page 651
3-2. Using the audio system Random playback - 2013 Toyota 4Runner | Owners Manual - Page 652
3-2. Using the audio system Switching the display Press Each time order: . is pressed, the display changes in the following Type A: Track no./Elapsed time → CD title → Track name. Type B and C: Track title → Track name/Artist name → Track name/ Elapsed time. - 2013 Toyota 4Runner | Owners Manual - Page 653
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 654
3-2. Using the audio system NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 655
3-2. Using the audio system NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 656
Volume CD eject Selecting a file Selecting a file Selecting a folder and files Fast-forwarding 3 Searching playback Displaying text messages Rewinding Playback Interior features Repeat play Random playback Type B and C Power Volume CD eject Selecting a file CD load Selector buttons (type C only - 2013 Toyota 4Runner | Owners Manual - Page 657
3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 349 Selecting MP3 and WMA discs (type C only) →P. 350 Selecting and scanning a folder - 2013 Toyota 4Runner | Owners Manual - Page 658
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 659
3-2. Using the audio system Repeat play - 2013 Toyota 4Runner | Owners Manual - Page 660
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 661
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 662
related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file with the extension .mp3 or .wma. ● Multi-sessions As the audio system is compatible with multi-sessions, it is possible to play discs Interior features 363 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 663
3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check - 2013 Toyota 4Runner | Owners Manual - Page 664
3 -2 . U sing t he a udio syst e m Ope rat ing a n iPod ∗ Connecting an iPod enables you to enjoy music from the vehicle speakers. - 2013 Toyota 4Runner | Owners Manual - Page 665
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 666
3-2. Using the audio system Selecting a play mode STEP 1 STEP 2 Press (BROWSE) to select iPod menu mode. or as corresponds to the Press , , desired play mode. Pressing (MORE) to change to the second selection list. - 2013 Toyota 4Runner | Owners Manual - Page 667
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 668
3-2. Using the audio system Selecting songs or press "∧" or "∨" on Turn to select the desired song. Playing and pausing songs Press . Fast-forwarding and rewinding songs Press and hold "∧" or "∨" on Shuffle playback - 2013 Toyota 4Runner | Owners Manual - Page 669
3-2. Using the audio system Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time - 2013 Toyota 4Runner | Owners Manual - Page 670
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 671
3 -2 . U sing t he a udio syst e m Ope rat ing a U SB m e m or y ∗ Connecting a USB memory enables you to enjoy music from the vehicle speakers. - 2013 Toyota 4Runner | Owners Manual - Page 672
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 673
3-2. Using the audio system Selecting and scanning files - 2013 Toyota 4Runner | Owners Manual - Page 674
3-2. Using the audio system Repeat play - 2013 Toyota 4Runner | Owners Manual - Page 675
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 676
the audio system ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII create any unnecessary folders. 377 3 Interior features 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 677
3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played - 2013 Toyota 4Runner | Owners Manual - Page 678
3 -2 . U sing t he a udio syst e m Opt im a l use of t he a udio syst e m Type A Adjusting the sound quality and ASL 3 Type B and C Adjusting the sound quality and ASL Interior features Selector buttons Menu button 379 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 679
3-2. Using the audio system Using the audio control function - 2013 Toyota 4Runner | Owners Manual - Page 680
3-2. Using the audio system Type B and C Mode displayed BASS MID TREB FADE Sound quality mode Bass* Mid-range* (type C only) Treble* Front/rear volume balance Left/right volume balance Level -5 to 5 -5 to 5 -5 to 5 F7 to R7 Shifts to rear Shifts to front Low High Turn to the left Turn to the right - 2013 Toyota 4Runner | Owners Manual - Page 681
3-2. Using the audio system Type B and C STEP 1 STEP 2 STEP 3 STEP 4 Press Press Press . (MORE). (ASL). (type B Press , , (type B only) or only) as corresponds to the desired mode. Type B: "LOW", "MID", "HIGH", or "OFF" Type C: "ON" or "OFF" ASL automatically adjusts the volume and tone quality - 2013 Toyota 4Runner | Owners Manual - Page 682
3-2. Using the audio system Party mode switch You can switch the sounds quality types by pressing the switch. Base mode Party mode In party mode, the sound volume from - 2013 Toyota 4Runner | Owners Manual - Page 683
3 -2 . U sing t he a udio syst e m U sing t he AU X por t This port can be used to connect a portable audio device and listen to it through the vehicle's speakers. STEP 1 Pull up the lid. STEP 2 Type A Open the cover and connect the portable audio device. Type B STEP 3 Press or . - 2013 Toyota 4Runner | Owners Manual - Page 684
the audio system or navigation system. Increases/decreases ume vol- Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs (type C only) CTH32AS046 3 iPod mode: Selects a song USB memory mode: Selects a file folder and Interior features Bluetooth® audio mode - 2013 Toyota 4Runner | Owners Manual - Page 685
you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time the switch is pressed. If no discs are inserted in the player, that mode will be skipped. FM→SAT→CD (type B only)→CD changer (type C only)→Bluetooth® Audio→AUX→USB/iPod - 2013 Toyota 4Runner | Owners Manual - Page 686
3-2. Using the audio system Selecting a track/file or song STEP 1 Press audio mode. to select CD, iPod, USB memory or Bluetooth® to select the desired track/file or STEP 2 Press "∨" or "∧" on song. Selecting a folder or album STEP 1 Press to select the CD, USB memory or Bluetooth® audio mode. - 2013 Toyota 4Runner | Owners Manual - Page 687
3 -2 . U sing t he a udio syst e m De t a cha ble pole a nt e nna The antenna can be removed. - 2013 Toyota 4Runner | Owners Manual - Page 688
3-2. Using the audio system - 2013 Toyota 4Runner | Owners Manual - Page 689
3-2. Using the audio system NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 690
a Display Audio system should refer to the "Display Audio System Owner's Manual". Owners of models equipped with a navigation system should refer to the "Navigation System Owner's Manual". Title Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Page Interior features - 2013 Toyota 4Runner | Owners Manual - Page 691
3-3. Using the Bluetooth® audio system - 2013 Toyota 4Runner | Owners Manual - Page 692
3-3. Using the Bluetooth® audio system CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 693
3 -3 . U sing t he Blue t oot h ® a udio syst e m U sing t he Blue t oot h ® a udio syst e m - 2013 Toyota 4Runner | Owners Manual - Page 694
3-3. Using the Bluetooth® audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system without the need to check the display or operate - 2013 Toyota 4Runner | Owners Manual - Page 695
to register a Bluetooth® enabled portable player in the system. Follow the procedure below to register (pair) a portable player: STEP 1 STEP 2 Press and hold Press until "BT AUDIO" is displayed. (SETUP). The introductory guidance and portable player name registration instructions are heard. STEP - 2013 Toyota 4Runner | Owners Manual - Page 696
. (→P. 414) Menu list of the Bluetooth® audio system Second menu First menu Third menu Pair Audio Players (Pair audio player) Select Audio Player Operation detail 3 Registering a portable player Interior features Selecting a portable player to be used Changing the registered name of a portable - 2013 Toyota 4Runner | Owners Manual - Page 697
3-3. Using the Bluetooth® audio system - 2013 Toyota 4Runner | Owners Manual - Page 698
h ® a udio syst e m Ope rat ing a Blue t oot h ® e na ble d port a ble pla ye r Power Volume Selecting a track/ fast-forwarding and reversing Selector knob Selecting an album 3 Playback Playback/pause Displaying text messages Interior features Selecting an album Press "∨" or "∧" on Selecting - 2013 Toyota 4Runner | Owners Manual - Page 699
3-3. Using the Bluetooth® audio system Fast-forwarding and reversing tracks Press and hold "∧" or "∨" on Switching the display Press . . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time - 2013 Toyota 4Runner | Owners Manual - Page 700
3 -3 . U sing t he Blue t oot h ® a udio syst e m Setting up a Bluetooth ® ena bled porta ble player Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for registered portable players: - 2013 Toyota 4Runner | Owners Manual - Page 701
3-3. Using the Bluetooth® audio system Registering a portable player Select "Pair Audio Players (Pair audio player)" using a voice command or , and perform the procedure for registering a portable player. (→P. 396) Selecting a portable player to be used STEP 1 Select "Select Audio Player" using a - 2013 Toyota 4Runner | Owners Manual - Page 702
either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If "From car" is selected, the portable player will be automatically connected whenever the engine switch is in either the "ACC" or "ON" position. Changing the registered name of a portable player 3 Interior features STEP - 2013 Toyota 4Runner | Owners Manual - Page 703
, the system returns to "BT Audio Setup". Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: "Select Audio Player" ● Changing a registered name: "Change Name - 2013 Toyota 4Runner | Owners Manual - Page 704
Using the Bluetooth® audio system Deleting a registered portable player STEP 1 Select "Delete Audio Player" using audio players". When the name of the desired portable player is read aloud, press the talk switch. 3 Interior features If the portable player to be deleted is paired as a Bluetooth - 2013 Toyota 4Runner | Owners Manual - Page 705
3 -3 . U sing t he Blue t oot h ® a udio syst e m Blue t oot h ® a udio syst e m se t up - 2013 Toyota 4Runner | Owners Manual - Page 706
system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a Display Audio system should refer to the "Display Audio System Owner's Manual". Owners - 2013 Toyota 4Runner | Owners Manual - Page 707
3-4. Using the hands-free phone system (for cellular phone) Title Using the hands-free phone system - 2013 Toyota 4Runner | Owners Manual - Page 708
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 709
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 710
3-4. Using the hands-free phone system (for cellular phone) CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 711
3 -4 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 712
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 713
3-4. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone system without the need to check the display or operate - 2013 Toyota 4Runner | Owners Manual - Page 714
. 3 Registration to the hands-free phone system only Interior features STEP 5 Select "Phone Only" using a voice command or . Registration to the hands-free phone system and Bluetooth® audio system at the same time STEP 5 Select "Int. Audio (Internal audio)" using a voice command or . STEP - 2013 Toyota 4Runner | Owners Manual - Page 715
3-4. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system - 2013 Toyota 4Runner | Owners Manual - Page 716
Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Setting a Hands-free power on/off Setting voice guidance volume Displaying a device information Initialization 3 Interior features Setup (Setup) Delete Phone Phone Setup List Phones Select Phone - 2013 Toyota 4Runner | Owners Manual - Page 717
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 718
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 719
3 -4 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) M a k ing a phone c a ll - 2013 Toyota 4Runner | Owners Manual - Page 720
3-4. Using the hands-free phone system (for cellular phone) Dialing by inputting a name STEP 1 STEP off-hook switch. b. Press the talk switch and say "Dial". 3 c. Select "Dial" using . Interior features Speed dialing STEP 1 STEP 2 Press the off-hook switch. Press the preset button to which the - 2013 Toyota 4Runner | Owners Manual - Page 721
phone) Transferring a phone call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone - 2013 Toyota 4Runner | Owners Manual - Page 722
system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select "Dial" using a voice command or . Storing the number in the phone book: Select "Store" using a voice command or . Deleting: Select "Delete" using a voice command or . 3 Interior - 2013 Toyota 4Runner | Owners Manual - Page 723
3 -4 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Se t t ing a c e llula r phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for registered cellular phones: - 2013 Toyota 4Runner | Owners Manual - Page 724
3-4. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used STEP the talk switch. 3 Interior features Pattern B STEP 2 Select the cellular phone to be used using . Changing a registered name STEP 1 Select "Change Phone Name (Change name)" using a voice - 2013 Toyota 4Runner | Owners Manual - Page 725
listing is complete, the system returns to "Phone Setup". Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available Selecting a cellularphone: "Select Phone" Changing a registered name: "Change Name" Deleting - 2013 Toyota 4Runner | Owners Manual - Page 726
3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP 1 the name of the desired cellular phone is being read aloud, press the talk switch. 3 Interior features Changing the passkey STEP 1 Select "Set Passkey" using a voice command or . STEP 2 Press - 2013 Toyota 4Runner | Owners Manual - Page 727
3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off - 2013 Toyota 4Runner | Owners Manual - Page 728
3 -4 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Se c urit y a nd syst e m se t up To enter the menu of each setting, follow the steps below: - 2013 Toyota 4Runner | Owners Manual - Page 729
3-4. Using the hands-free phone system (for cellular phone) STEP 2 Enter a PIN using a voice command or . When using - 2013 Toyota 4Runner | Owners Manual - Page 730
the hands-free phone system (for cellular phone) Setting voice guidance volume STEP 1 STEP 2 Select "Guidance Volume" using Change the voice guidance volume. To decrease the volume: Turn . counterclockwise. To increase the volume: Turn clockwise. 3 Initialization Interior features STEP - 2013 Toyota 4Runner | Owners Manual - Page 731
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 732
speed dial)" ● Changing a registered name 1. "Phonebook" → 2. "Change Name" ● Deleting registered data 1. "Phonebook" → 2. "Delete Entry" ● Deleting speed dial 1. "Phonebook" → 2. "Delete Speed Dial" ● Listing the registered data 1. "Phonebook" → 2. "List Names" 3 Interior features Adding a new - 2013 Toyota 4Runner | Owners Manual - Page 733
3-4. Using the hands-free phone system (for cellular phone) - 2013 Toyota 4Runner | Owners Manual - Page 734
Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1 Select "Manual Input" using . STEP2-2 Input or "Incoming Call History (Incoming)" using a voice command or . 3 Interior features STEP2-3 Select the data to be registered by either of the following - 2013 Toyota 4Runner | Owners Manual - Page 735
3-4. Using the hands-free phone system (for cellular phone) STEP 3 Select the name to be registered by either of the following methods, and select "Confirm" using a voice command or : a. Press the - 2013 Toyota 4Runner | Owners Manual - Page 736
3-4. Using the hands-free phone system (for cellular phone) Setting speed dials STEP 1 Select "Speed read aloud, press the talk switch, and select "Confirm" using a voice command or . Interior features c. Select the desired data using STEP 3 . Select the desired preset button, and register - 2013 Toyota 4Runner | Owners Manual - Page 737
3-4. Using the hands-free phone system (for cellular phone) Changing a registered name STEP 1 STEP 2 Select "Change Name" using a voice command or . Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select "Confirm" using a voice - 2013 Toyota 4Runner | Owners Manual - Page 738
3-4. Using the hands-free phone system (for cellular phone) Deleting registered data STEP 1 Select "Delete the desired phone number is being read aloud, press the talk switch. Deleting speed dials 3 Interior features STEP 1 Select "Delete Speed Dial" using a voice command or . STEP 2 Press - 2013 Toyota 4Runner | Owners Manual - Page 739
be read aloud. When listing is complete, the system returns to "Phonebook". Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available Dialing: "Dial" Changing a registered name: "Change Name" Deleting an entry: "Delete Entry - 2013 Toyota 4Runner | Owners Manual - Page 740
e rior light s list 3 Interior features CTH35AS003 Rear interior light (→P. 442) Front interior light/front personal lights (→P. 442) Shift lever light (when the engine switch is in the "ACC" or "ON" position [without a smart key system] or "ENGINE START STOP" switch is in ACCESSORY or IGNITION - 2013 Toyota 4Runner | Owners Manual - Page 741
3-5. Using the interior lights Interior lights and personal lights Interior lights Front Turns the lights off Turns the door position on CTH36AS022 Rear Turns the door position on Turns the light off Turns the light on CTH36AS024 Personal lights Turns the lights on/off CTH36AS034 442 - 2013 Toyota 4Runner | Owners Manual - Page 742
3-5. Using the interior lights Personal lights - 2013 Toyota 4Runner | Owners Manual - Page 743
3 -6 . U sing t he st ora ge fe a t ure s List of st ora ge fe at ure s Auxiliary boxes Glove box Bottle holders Tissue pocket Cup holders Pen holder Console box Coin holder 444 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 744
3-6. Using the storage features Glove box CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 745
3-6. Using the storage features Console box Console box Lift the lid while pulling up the knob to release the lock. CTH36AS011 - 2013 Toyota 4Runner | Owners Manual - Page 746
3-6. Using the storage features Coin holder Coin holder Lift the lid while pulling up the knob to release the lock. 3 Interior features CTH36AS013 CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 747
3-6. Using the storage features Tissue pocket Tissue pocket Lift the lid while pulling up the knob to release the lock. CTH36AS014 CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 748
3-6. Using the storage features Pen holder Pen holder Lift the lid while pulling up the knob to release the lock. 3 Interior features CTH36AS015 CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 749
3-6. Using the storage features Auxiliary box Auxiliary box Type A Pull up the lid. CTH36AS017 Type B (if equipped) Push the lid. CTH36AS016 450 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 750
3-6. Using the storage features Auxiliary box CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 751
3-6. Using the storage features Cup holders Cup holders Front seats CTH36AS009 Rear seats (without third row seats) Pull down the rear seat center armrest. CTH36AS005 Second row seats (with third row seats) Pull down - 2013 Toyota 4Runner | Owners Manual - Page 752
3-6. Using the storage features Cup holders Third row seats (if equipped) CTH36AS020 - 2013 Toyota 4Runner | Owners Manual - Page 753
3-6. Using the storage features Cup holders CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 754
3-6. Using the storage features Bottle holders Bottle holders Front seats CTH36AS018 Rear seats (without third row seats)/Second row seats (with third row seats) 3 Interior features CTH36AS019 - 2013 Toyota 4Runner | Owners Manual - Page 755
3-6. Using the storage features Bottle holders NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 756
down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward. CTH37AS007 3 Interior features 457 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 757
3 -7 . Ot he r int e rior fe a t ure s Va nit y m irrors Slide the cover to open. The light turns on when the cover is opened. CTH37AS008 NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 758
3 -7 . Ot he r int e rior fe a t ure s Clock Adjusts the hours Adjusts the minutes 3 Interior features 459 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 759
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 760
3 -7 . Ot he r int e rior fe a t ure s Out side t e m pe rat ure displa y The temperature display shows temperatures within the ranges of -40° F (-40° C) an d 122° F (50° C). Vehicles without Multi-terrain Select 3 Interior features 461 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 761
3-7. Other interior features Vehicles with Multi-terrain Select - 2013 Toyota 4Runner | Owners Manual - Page 762
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 763
3 -7 . Ot he r int e rior fe a t ure s Pow e r out le t s (1 2 V DC) The power outlet can be used for 12 V accessories that run on less than 10 A. Center panel CTH37AS006 464 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 764
3-7. Other interior features Glove box 3 Interior features CTH37AS096 Luggage compartment (vehicles without the 120 V AC) CTH37AS085 465 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 765
3-7. Other interior features Luggage compartment (vehicles with the 120 V AC) CTH37AS086 - 2013 Toyota 4Runner | Owners Manual - Page 766
outlet, turn on the main switch. The power supply starts a few seconds after the main switch is pressed. CTH37AS055 Power outlet socket (in the console box) 3 Interior features CTH37AS023 ∗: If equipped 467 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 767
3-7. Other interior features Power outlet socket (luggage compartment) CTH37AS087 Maximum available capacity of the power outlet - 2013 Toyota 4Runner | Owners Manual - Page 768
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 769
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 770
3-7. Other interior features CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 771
3-7. Other interior features NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 772
3-7. Other interior features NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 773
3 -7 . Ot he r int e rior fe a t ure s Se at he at e rs ∗ Front passenger's seat On The indicator light comes on. Adjusts the seat temperature The further you move the dial forward, the warmer the seat becomes. Driver's seat CTH37AS005 - 2013 Toyota 4Runner | Owners Manual - Page 774
3-7. Other interior features CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 775
3 -7 . Ot he r int e rior fe a t ure s Ar m re st Fold down the armrest for use. CTH37AS088 NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 776
3 -7 . Ot he r int e rior fe a t ure s Assist grips An assist grip (type A) installed on the ceiling can be used to support your body while sitting on the seat. An assist grip (type B) installed on the pillar can be used when getting in or out of the - 2013 Toyota 4Runner | Owners Manual - Page 777
. Ot he r int e rior fe a t ure s Floor m at Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. STEP 1 Insert the retaining hooks (clips) into the floor mat eyelets. STEP 2 * Turn the upper knob of - 2013 Toyota 4Runner | Owners Manual - Page 778
3-7. Other interior features CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident - 2013 Toyota 4Runner | Owners Manual - Page 779
3 -7 . Ot he r int e rior fe a t ure s Com pa ss The compass on the accessory meter display indicates the direction in which the vehicle is heading. "MODE/ "SET/ " button " button Direction display - 2013 Toyota 4Runner | Owners Manual - Page 780
features Calibrating the compass 3 Samoa: 5 Guam: 8 Saipan: 8 CTH37AS072 Interior features The direction display deviates from the true direction determined by the earth's magnetic field. The amount of deviation varies depending on the geographic position - 2013 Toyota 4Runner | Owners Manual - Page 781
3-7. Other interior features Deviation calibration STEP 1 STEP 2 Stop the vehicle. Change the accessory meter display to deviation calibration mode by doing the following. When the parking lights are turned on: Press and hold the "MODE/ " button. A number (1 to 15) will appear on the display. When - 2013 Toyota 4Runner | Owners Manual - Page 782
pressed for more than 6 seconds, the number will automatically be confirmed and the display returned to normal.) Interior features STEP 1 STEP 2 Stop the vehicle in a place where it is safe to drive in a circle. In deviation calibration mode (→P. 482), press and hold the "MODE/ " button to change - 2013 Toyota 4Runner | Owners Manual - Page 783
3-7. Other interior features STEP 3 Drive the vehicle in a circle completing at least one full circle within 20 - 120 seconds. If there is not enough space to drive in a circle, drive around the block until a direction is displayed. STEP 4 Press and hold the "SET/ " button to confirm the - 2013 Toyota 4Runner | Owners Manual - Page 784
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 785
3 -7 . Ot he r int e rior fe a t ure s Lugga ge c om pa r t m e nt fe at ure s - 2013 Toyota 4Runner | Owners Manual - Page 786
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 787
3-7. Other interior features Vehicles without third seats (pattern 2) Raise the cargo hook to use. CTH37AS091 - 2013 Toyota 4Runner | Owners Manual - Page 788
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 789
3-7. Other interior features Type B (if equipped) To use the grocery bag hooks, slide the slide deck to the fullslide locked position. (→P. 489) CTH37AS095 CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 790
3-7. Other interior features NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 791
3 -7 . Ot he r int e rior fe a t ure s Ga ra ge door ope ne r The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. The garage door opener (HomeLink® Universal Transceiver) is manufactured under - 2013 Toyota 4Runner | Owners Manual - Page 792
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 793
3-7. Other interior features STEP 3 Test the HomeLink® operation by pressing the newly programmed ® button. The remote control transmitter is of the rolling code type if the HomeLink® indicator light flashes rapidly for 2 seconds and then remains lit. If your transmitter is the rolling code type - 2013 Toyota 4Runner | Owners Manual - Page 794
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 795
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 796
button and press and hold the transmitter button until the HomeLink® indicator light changes from a slow to a rapid flash. Release the buttons. Erasing until the indicator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory. 3 Interior features - 2013 Toyota 4Runner | Owners Manual - Page 797
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 798
service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Toyota's designated response center, which operates 24 hours per day, 7 days per week. Safety Connect service is available - 2013 Toyota 4Runner | Owners Manual - Page 799
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 800
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 801
3-7. Other interior features Safety Connect LED light Indicators When the "ENGINE START STOP" switch is turned to IGNITION ON mode (vehicles with a smart key system) or the engine switch is turned to the "ON" position (vehicles without a smart key system), the red indicator light comes on for 2 - 2013 Toyota 4Runner | Owners Manual - Page 802
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 803
3-7. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. - 2013 Toyota 4Runner | Owners Manual - Page 804
3-7. Other interior features - 2013 Toyota 4Runner | Owners Manual - Page 805
3-7. Other interior features 506 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 806
Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such as a chamois - 2013 Toyota 4Runner | Owners Manual - Page 807
4-1. Maintenance and care - 2013 Toyota 4Runner | Owners Manual - Page 808
4-1. Maintenance and care NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 809
4 -1 . M a int e na nc e a nd c a re Cle a ning a nd prot e c t ing t he ve hicle int e rior The following procedures will help protect your vehicle's interior and keep it in top condition: - 2013 Toyota 4Runner | Owners Manual - Page 810
4-1. Maintenance and care - 2013 Toyota 4Runner | Owners Manual - Page 811
4-1. Maintenance and care NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 812
4 -2 . M a int e na nc e M a int e na nc e re quire m e nt s To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner's responsibility to perform regular checks. Toyota recommends performing the following maintenance: - 2013 Toyota 4Runner | Owners Manual - Page 813
4-2. Maintenance - 2013 Toyota 4Runner | Owners Manual - Page 814
4-2. Maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 815
"Owner's Manual Supplement/Scheduled Maintenance Guide". It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Battery Brake fluid Engine coolant Engine oil Exhaust system Power steering - 2013 Toyota 4Runner | Owners Manual - Page 816
interior smoothly? • Does the brake pedal have appropriate clearance from the floor? • Does the brake pedal have the floor when the brakes are applied. • Do the head restraints move smoothly and lock securely? • Do the indicators and buzzers function properly? • Do all the lights come on? Automatic - 2013 Toyota 4Runner | Owners Manual - Page 817
stopped? • Do the seat belts operate smoothly? • The seat belts should not be damaged. • Do the seat controls operate properly? • Does the steering wheel rotate smoothly? • Does the steering wheel have the correct amount of free play? • There should not be any strange sounds coming from the steering - 2013 Toyota 4Runner | Owners Manual - Page 818
Check points • Do the doors operate smoothly? • Does the engine hood lock system work properly? • There should not be any signs of fluid leakage after the vehicle or excessively worn. • Have the tires been rotated according to the maintenance schedule? • The wheel nuts should not be loose. CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 819
4 -2 . M a int e na nc e Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. - 2013 Toyota 4Runner | Owners Manual - Page 820
be sure to follow the correct procedure as given in these sections. Items Parts and tools Warm water Baking soda Grease Conventional wrench (for terminal clamp bolts water. • Funnel (used only for adding engine coolant) • "Toyota Genuine Motor Oil" or equivalent • Rag or paper towel • Funnel - 2013 Toyota 4Runner | Owners Manual - Page 821
Items Fuses (→P. 560) Parts and tools • Fuse with same amperage rating as original • Bulb with same number and wattage rating as original • Phillips-head screwdriver • Flathead screwdriver • Wrench • Automatic transmission fluid DEXRON® II or III • Rag or paper towel • Clean funnel Light bulbs - 2013 Toyota 4Runner | Owners Manual - Page 822
4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: - 2013 Toyota 4Runner | Owners Manual - Page 823
-yourse lf m a int e na nc e H ood Release the lock from the inside of the vehicle to open the hood. STEP 1 Pull the hood release lever. The hood will pop up slightly. CTH43AS009 STEP 2 Push the auxiliary catch lever to the left and lift the hood. 4 CTH43AS142 Maintenance and care CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 824
om pa r t m e nt CTH43AS117 Washer fluid tank (→P. 540) Power steering fluid reservoir (→P. 535) Engine oil level dipstick (→P. 528) Engine coolant reservoir (→P. 531) Engine oil filler cap (→P. 528) Brake fluid reservoir (→P. 533) Fuse box Battery Condenser Radiator (→P. 560) (→P. 537) (→P. 532 - 2013 Toyota 4Runner | Owners Manual - Page 825
4-3. Do-it-yourself maintenance Engine compartment cover - 2013 Toyota 4Runner | Owners Manual - Page 826
4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. - 2013 Toyota 4Runner | Owners Manual - Page 827
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 828
4-3. Do-it-yourself maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 829
4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the "F" and "L" lines on the reservoir when the engine is cold. Reservoir cap "F" line "L" line If the level is on or below the "L" line, add coolant up to the "F" line. (→P. 631) CTH43AS108 - 2013 Toyota 4Runner | Owners Manual - Page 830
4-3. Do-it-yourself maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 831
4-3. Do-it-yourself maintenance Brake fluid - 2013 Toyota 4Runner | Owners Manual - Page 832
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 833
4-3. Do-it-yourself maintenance Power steering fluid - 2013 Toyota 4Runner | Owners Manual - Page 834
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 835
4-3. Do-it-yourself maintenance Battery Check the battery as follows: Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp CTH43AS118 - 2013 Toyota 4Runner | Owners Manual - Page 836
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 837
4-3. Do-it-yourself maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 838
4-3. Do-it-yourself maintenance Washer fluid Type A If any washer does not work or the low washer fluid warning light comes on, the washer tank may be empty. Add washer fluid. CTH43AS119 Type B If the washer fluid level is at "LOW", add washer fluid. CTH43AS071 - 2013 Toyota 4Runner | Owners Manual - Page 839
4-3. Do-it-yourself maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 840
4 -3 . Do-it -yourse lf m a int e na nc e T ire s Replace or rotate tires in accordance with maintenance schedules and treadwear. - 2013 Toyota 4Runner | Owners Manual - Page 841
pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves and transmitters must also be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes - 2013 Toyota 4Runner | Owners Manual - Page 842
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 843
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 844
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 845
4-3. Do-it-yourself maintenance NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 846
4 -3 . Do-it -yourse lf m a int e na nc e T ire inflat ion pre ssure - 2013 Toyota 4Runner | Owners Manual - Page 847
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 848
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 849
4-3. Do-it-yourself maintenance CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 850
4 -3 . Do-it -yourse lf m a int e na nc e Whe e ls If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. - 2013 Toyota 4Runner | Owners Manual - Page 851
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 852
4-3. Do-it-yourself maintenance NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 853
4 -3 . Do-it -yourse lf m a int e na nc e Air c ondit ioning filt e r The air conditioning filter must be changed regularly to maintain air conditioning efficiency. - 2013 Toyota 4Runner | Owners Manual - Page 854
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 855
4 -3 . Do-it -yourse lf m a int e na nc e Wire le ss re m ot e c ont rol/e le c t ronic ke y bat t e r y Replace the battery with a new one if it is depleted. - 2013 Toyota 4Runner | Owners Manual - Page 856
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 857
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 858
necessary. STEP 1 Vehicles without a smart key system Turn the engine switch off. Vehicles with a smart key system Turn the "ENGINE START STOP" switch off. STEP 2 Open the fuse box cover. Push the tab in and lift the lid off. Engine compartment CTH43AS123 Driver's side instrument panel Remove - 2013 Toyota 4Runner | Owners Manual - Page 859
5 Check if the fuse is blown. Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. CTH43AS030 Type A 4 Maintenance and care Type B Normal fuse Blown fuse Replace the blown fuse with a new fuse of an - 2013 Toyota 4Runner | Owners Manual - Page 860
be found on the fuse box lid. CTH43AS073 Type D Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. CTH43AS074 Type E Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate - 2013 Toyota 4Runner | Owners Manual - Page 861
4-3. Do-it-yourself maintenance Type F Normal fuse Blown fuse Contact your Toyota dealer. CTH43AS076 4 Maintenance and care 563 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 862
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings - 2013 Toyota 4Runner | Owners Manual - Page 863
fuel injection system Automatic running boards system Trailer stop/turn lights No circuit Audio system Starter system MAYDAY Audio system ABS, VSC ABS, VSC AIR PMP MTR Interior lights, vanity lights Multiplex communication system, meter and gauge Right-hand headlight (low beam) Left-hand headlight - 2013 Toyota 4Runner | Owners Manual - Page 864
WIP, WASHER, KDSS, 4WD, BKUP LP, TOWING BKUP, DOOR P, DOOR RL, DOOR RR, DOOR D, P/SEAT FL, P/SEAT FR, DOOR, A/C, OBD, DOOR BACK, S/ROOF, PANEL, TAIL, FOG FR, D/L NO.2 fuses, AIR PMP HTR IG2, EFI, A/F, HORN fuses Multiport fuel injection system/ sequential multiport fuel injection system Smart key - 2013 Toyota 4Runner | Owners Manual - Page 865
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 866
Starter system Air conditioning system On-Board diagnosis Fog lights Multiplex communication system Front driver's power seat Four wheel drive system Kinetic dynamic suspension system Trailer back-up lights Back-up lights Multiport fuel injection system/ sequential multiport fuel injection system - 2013 Toyota 4Runner | Owners Manual - Page 867
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 868
4 -3 . Do-it -yourse lf m a int e na nc e Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other - 2013 Toyota 4Runner | Owners Manual - Page 869
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 870
4-3. Do-it-yourself maintenance STEP 2 Unplug the connector while depressing the lock release. High beam Low beam CTH43AS091 - 2013 Toyota 4Runner | Owners Manual - Page 871
4-3. Do-it-yourself maintenance STEP 4 Turn the bulb base counterclockwise. CTH43AS114 STEP 5 Remove the light bulb. CTH43AS115 4 - 2013 Toyota 4Runner | Owners Manual - Page 872
4-3. Do-it-yourself maintenance STEP 3 Partly remove the fender liner. CTH43AS093 STEP 4 Unplug the connector while depressing the lock release. CTH43AS094 STEP 5 Turn the bulb base counterclockwise. CTH43AS095 574 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 873
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 874
4-3. Do-it-yourself maintenance STEP 4 Turn the bulb base counterclockwise. CTH43AS060 STEP 5 Remove the light bulb. CTH43AS125 576 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 875
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 876
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 877
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 878
4-3. Do-it-yourself maintenance - 2013 Toyota 4Runner | Owners Manual - Page 879
5 -1 . Esse nt ia l inform a t ion Em e rge ncy fla she rs Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. CTH51AS005 NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 880
towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/provincial and local laws. Before towing The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. ● The engine is running but - 2013 Toyota 4Runner | Owners Manual - Page 881
5-1. Essential information Vehicles with a front spoiler only: Before using the front emergency towing eyelet(s), remove the cover(s). CTH51AS007 Removing the clips Installing the clips CTH51AS008 Towing with a sling-type truck Do not tow with a sling-type - 2013 Toyota 4Runner | Owners Manual - Page 882
) Full-time 4WD models: Use a towing dolly under the front wheels. Part-time 4WD models: When not using a towing dolly, turn the engine switch to the "ACC" position, shift the shift lever to N and shift the front-wheel drive control lever or switch to H2. 5 When trouble arises 585 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 883
5-1. Essential information Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. CTH51AS011 - 2013 Toyota 4Runner | Owners Manual - Page 884
5-1. Essential information CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 885
5-1. Essential information NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 886
5 -1 . Esse nt ia l inform a t ion I f you t hink som e t hing is w rong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. - 2013 Toyota 4Runner | Owners Manual - Page 887
or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated. Vehicles without a smart key system STEP 1 STEP 2 Turn the engine switch to the "ACC" or "LOCK" position - 2013 Toyota 4Runner | Owners Manual - Page 888
vehicle may be dangerous. The following warning indicates a possible problem in the brake system. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* • Low brake fluid • Malfunction in the brake - 2013 Toyota 4Runner | Owners Manual - Page 889
emission control system; • The electronic engine control system; • The electronic throttle control system; or • The electronic automatic transmission control system SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The - 2013 Toyota 4Runner | Owners Manual - Page 890
-wheel drive system Center differential lock indicator light (if equipped) Indicates a malfunction in the four-wheel drive system Multi-terrain Select indicator light (if equipped) Indicates a malfunction in the Multi-terrain Select system 593 (Flashes) (Flashes rapidly) 5 When trouble arises - 2013 Toyota 4Runner | Owners Manual - Page 891
. KDSS warning light (if equipped) Indicates a malfunction in KDSS Automatic running boards indicator light (if equipped) Indicates a malfunction in Automatic running boards Automatic transmission fluid temperature warning light Indicates a malfunction in the automatic transmission system (Flashes - 2013 Toyota 4Runner | Owners Manual - Page 892
to fasten his/her seat belt Front passenger's seat belt reminder light (warning buzzer)*2 Warns the front passenger to fasten his/her seat belt Correction procedure Check that all the doors are closed. Refuel the vehicle. Fasten the seat belt. 5 When trouble arises (On the center panel) Fasten - 2013 Toyota 4Runner | Owners Manual - Page 893
Malfunction in the tire pressure warning system (→P. 603) Automatic transmission fluid temperature warning light Indicates that the automatic transmission fluid temperature is too high Low windshield washer fluid warning light Low level of washer fluid Have the system checked by your Toyota dealer - 2013 Toyota 4Runner | Owners Manual - Page 894
5-2. Steps to take in an emergency Warning light Warning light/Details Maintenance required reminder light Indicates that maintenance is required according to the driven distance on Please reset the maintenance data after the maintenance is performed. (→P. 515) 5 When trouble arises 597 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 895
/h]). *2:Driver's and front passenger's seat belt buzzer: The driver's and front passenger's seat belt buzzer sounds to alert the driver and front passenger that his or separate "Scheduled Maintenance Guide" or "Owner's Manual Supplement" for the maintenance interval applicable to your vehicle. 598 - 2013 Toyota 4Runner | Owners Manual - Page 896
the specified steps to correct the suspected problem, check that the warning light goes off. Interior buzzer Exterior buzzer Warning light Warning light/Details Smart key system warning light Indicates that the electronic key is not present when the "ENGINE START STOP" switch is pressed Smart key - 2013 Toyota 4Runner | Owners Manual - Page 897
5-2. Steps to take in an emergency Interior buzzer Exterior buzzer Warning light Warning light/Details Smart key system warning light Indicates that the driver's door has been opened and closed with the shift lever not in P, the "ENGINE START STOP" switch in any mode other than off and the - 2013 Toyota 4Runner | Owners Manual - Page 898
5-2. Steps to take in an emergency - 2013 Toyota 4Runner | Owners Manual - Page 899
5-2. Steps to take in an emergency - 2013 Toyota 4Runner | Owners Manual - Page 900
5-2. Steps to take in an emergency - 2013 Toyota 4Runner | Owners Manual - Page 901
5-2. Steps to take in an emergency CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 902
5-2. Steps to take in an emergency CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 903
with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pressure warning system) - 2013 Toyota 4Runner | Owners Manual - Page 904
5 -2 . St e ps t o t a k e in a n e m e rge nc y I f you have a flat t ire Remove the flat tire and replace it with the spare tire provided. - 2013 Toyota 4Runner | Owners Manual - Page 905
5-2. Steps to take in an emergency Taking out the jack and tool bag STEP 1 Remove the cover. CTH52AS020 STEP 2 Unhook and take out the tool bag. CTH52AS004 STEP 3 Take out the jack. For loosening For tightening CTH52AS035 608 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 906
handle or a screwdriver. CTH52AS051 Assemble the jack handle extension bars and tighten the bolt. Check that the bolt is firmly tightened. 5 CTH52AS052 When trouble arises Assemble the jack handle and the jack handle extension bar and tighten the screw. Check that the screw is firmly tightened - 2013 Toyota 4Runner | Owners Manual - Page 907
5-2. Steps to take in an emergency STEP 2 Insert the end of the jack handle extension into the lowering screw and turn it counterclockwise. Lower the spare tire completely to the ground. CTH52AS008 STEP 3 Pull out the spare tire and remove the holding bracket. CTH52AS009 610 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 908
lefthand side tire In front of the front right-hand side tire In front of the front left-hand side tire 5 Flat tire CTH52AS038 Lefthand side Front Righthand side Lefthand side Rear Righthand side When trouble arises STEP 2 Remove the wheel ornament using the wheel ornament remover. To protect - 2013 Toyota 4Runner | Owners Manual - Page 909
5-2. Steps to take in an emergency STEP 3 Slightly loosen the wheel nuts (one turn). CTH52AS012 STEP 4 Assembling the jack handle. Remove the jack handle, jack handle extension bar and jack handle bar from the tool bag - 2013 Toyota 4Runner | Owners Manual - Page 910
5 Position the jack at the jack points as shown. Front - Under the chassis frame side rail Rear - Under the rear axle housing 5 When trouble arises CTH52AS039 STEP 6 Raise the vehicle until the tire is slightly raised off the ground. When positioning the jack under the rear axle housing, make - 2013 Toyota 4Runner | Owners Manual - Page 911
5-2. Steps to take in an emergency STEP 7 Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. CTH52AS016 Installing the spare tire STEP 1 Remove any dirt or foreign matter from the - 2013 Toyota 4Runner | Owners Manual - Page 912
wheel, tighten the wheel nuts until the washers comes into contact with the disc wheel. STEP 3 Lower the vehicle. CTH52AS019 STEP 4 Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 81 ft• lbf (110 N• m, 11.2 kgf• m) 5 When trouble - 2013 Toyota 4Runner | Owners Manual - Page 913
tire with the outer side facing up, and install the holding bracket. Insert the holding bracket tab into one of the holes in the wheel. CTH52AS059 STEP 2 Raise the tire. Vehicles with kinetic dynamic suspension: Pull the tire toward the rear of the vehicle when raising. After raising, visually - 2013 Toyota 4Runner | Owners Manual - Page 914
5-2. Steps to take in an emergency CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 915
5-2. Steps to take in an emergency CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 916
5-2. Steps to take in an emergency NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 917
5 -2 . St e ps t o t a k e in a n e m e rge nc y I f t he e ngine w ill not st a r t If the engine will not start even though correct starting procedures are being followed (→P. 170, 173), consider each of the following points: - 2013 Toyota 4Runner | Owners Manual - Page 918
5-2. Steps to take in an emergency - 2013 Toyota 4Runner | Owners Manual - Page 919
foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have smart key system Turn the engine switch to the "ACC" position. Vehicles with a smart key system Turn the "ENGINE START STOP" switch to ACCESSORY mode. STEP - 2013 Toyota 4Runner | Owners Manual - Page 920
can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key number stamped on the key number plate. 5 When trouble arises 623 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 921
e in a n e m e rge nc y If you cannot operate back door opener If the back door opener does not operate, there may be a problem with the back door opener system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the - 2013 Toyota 4Runner | Owners Manual - Page 922
because the battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below. the key once again unlocks the other doors. 5 CTH52AS001 When trouble arises 625 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 923
depress the brake pedal. Touch the Toyota emblem side of the electronic key to the "ENGINE START STOP" switch. If any of the doors is opened or closed while the cannot detect the key. CTH52AS002 STEP 3 Press the "ENGINE START STOP" switch within 10 seconds of the buzzer sounding, keeping the brake pedal - 2013 Toyota 4Runner | Owners Manual - Page 924
t he ve hicle bat t e r y is discha rge d The following procedures may be used to start the engine if the vehicle's battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have moving parts, as shown in the illustration. 5 When trouble arises 627 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 925
START STOP" switch to IGNITION ON mode (vehicles with a smart key system) or turning the engine switch to the "ON" position (vehicles without a smart key system). Once the vehicle's engine has started, remove the jumper cables in the exact reverse order from which they were connected. STEP 3 STEP - 2013 Toyota 4Runner | Owners Manual - Page 926
5-2. Steps to take in an emergency - 2013 Toyota 4Runner | Owners Manual - Page 927
5-2. Steps to take in an emergency CAUTION - 2013 Toyota 4Runner | Owners Manual - Page 928
turn off the air conditioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine. Carefully lift the hood after the steam subsides and then restart the engine. If you do not see steam: Leave the engine running and carefully lift the hood. STEP 2 STEP - 2013 Toyota 4Runner | Owners Manual - Page 929
5-2. Steps to take in an emergency STEP 5 Add engine coolant if necessary. Water can be used in an emergency if engine coolant is unavailable. (→P. 643) CTH52AS033 Have the vehicle inspected at the nearest Toyota dealer as soon as possible. - 2013 Toyota 4Runner | Owners Manual - Page 930
5-2. Steps to take in an emergency NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 931
out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: STEP 1 Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow or sand from around the stuck tire. Place wood, stones or some other material under the tires - 2013 Toyota 4Runner | Owners Manual - Page 932
After slowing down, stop the vehicle in a safe place by the road. Stop the engine. STEP 4 If the shift lever cannot be shifted to N STEP 3 Keep depressing the a smart key system: Stop the engine by turning the engine switch to the "ACC" position. STEP 4 5 When trouble arises 635 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 933
STEP 4 Press and hold for 2 seconds or more, or press briefly 3 times or more STEP 5 Vehicles with a smart key system: To stop the engine, press and hold the "ENGINE START STOP" switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession. Stop the vehicle in - 2013 Toyota 4Runner | Owners Manual - Page 934
6 -1 . Spe c ific a t ions M a int e na nc e dat a (fue l, oil leve l, e t c .) Dimensions and weights Overall length Overall width Overall height Wheelbase Tread Front Rear 189.8 in. (4820 mm) 75.8 in. (1925 mm) *1 70.1 in. (1780 mm) 109.8 in. (2790 mm) 63.2 in. (1605 mm) 63.2 in. (1605 mm) - 2013 Toyota 4Runner | Owners Manual - Page 935
6-1. Specifications Vehicle identification - 2013 Toyota 4Runner | Owners Manual - Page 936
and stroke Displacement Valve clearance (engine cold) Drive belt tension 1GR-FE 6-cylinder V type, 4-cycle, gasoline 3.70 × 3.74 in. (94.0 × 95.0 mm) 241.4 cu.in. (3956 cm3) Automatic adjustment Automatic adjustment Fuel Fuel type Octane rating Fuel tank capacity (Reference) Unleaded gasoline only - 2013 Toyota 4Runner | Owners Manual - Page 937
Specifications Lubrication system Oil capacity (Drain and refill ⎯ reference*) With filter Without filter 6.6 qt. (6.2 L, 5.5 Imp. qt.) 6.0 qt. (5.7 L, 5.0 Imp. qt.) *: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait - 2013 Toyota 4Runner | Owners Manual - Page 938
6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use. CTH61AS018 642 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 939
6-1. Specifications Cooling system Capacity 11.1 qt. (10.5 L, 9.2 Imp. qt.) Use either of the following: • "Toyota Super Long Life Coolant" • hybrid organic acid technology Do not use plain water alone. Coolant type Ignition system Spark plug Make Gap DENSO SK20HR11 0.043 in. (1.1 mm) NOTICE - 2013 Toyota 4Runner | Owners Manual - Page 940
after the engine and all the lights are turned off.) 5 A max. Charging rates Transfer (4WD models) Part-time 4WD models 1.1 qt. (1.0 L, 0.9 Imp. qt.) Full-time 4WD models 1.5 qt. (1.4 L, 1.2 Imp. qt.) Toyota Genuine Transfer gear oil LF or equivalent SAE 75W Oil capacity Oil type* Recommended - 2013 Toyota 4Runner | Owners Manual - Page 941
6-1. Specifications Front differential (4WD models) Part-time 4WD models 1.6 qt. (1.55 L, 1.4 Imp. qt.) Full-time 4WD models 1.5 qt. (1.40 L, 1.2 Imp. qt.) Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent Oil capacity Oil type and viscosity* *: Your Toyota vehicle is filled with - 2013 Toyota 4Runner | Owners Manual - Page 942
6-1. Specifications Automatic transmission Fluid capacity* Fluid type tact your Toyota dealer. 11.3 qt. (10.7 L, 9.4 Imp. qt.) Toyota Genuine ATF WS *: The fluid capacity is a reference quantity. If replacement is necessary, conNOTICE - 2013 Toyota 4Runner | Owners Manual - Page 943
base chassis grease, NLGI No.2 Steering Free play Power steering fluid type Less than 1.2 in. (30 mm) Automatic transmission fluid DEXRON® II or III Tires and wheels Tire size P265/70R17 113S, P245/60R20 107H Front: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm2 or bar - 2013 Toyota 4Runner | Owners Manual - Page 944
bulbs Headlights Low beam High beam Front turn signal and daytime running lights Parking lights and front side marker lights Exterior Fog lights Rear turn signal lights Back-up lights License plate lights Stop/tail and rear side marker lights Outer foot lights* Front personal/ front interior lights - 2013 Toyota 4Runner | Owners Manual - Page 945
87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada - 2013 Toyota 4Runner | Owners Manual - Page 946
6-1. Specifications - 2013 Toyota 4Runner | Owners Manual - Page 947
6-1. Specifications - 2013 Toyota 4Runner | Owners Manual - Page 948
materials (→P. 653) Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Location of treadwear indicators Load limit at maximum cold tire inflation pressure (→P. 542) (→P. 544) 652 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 949
Maximum cold tire inflation pressure This means the pressure to which a tire may be inflated. (→P. 647) TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure - 2013 Toyota 4Runner | Owners Manual - Page 950
6-1. Specifications Tire size - 2013 Toyota 4Runner | Owners Manual - Page 951
rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers - 2013 Toyota 4Runner | Owners Manual - Page 952
6-1. Specifications - 2013 Toyota 4Runner | Owners Manual - Page 953
are available as factory-installed equipment (whether installed or not) The weight of a motor vehicle with standard equipment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine The sum of: (a) Curb weight (b) Accessory - 2013 Toyota 4Runner | Owners Manual - Page 954
cargo and luggage load plus 150 lb. (68 kg) times the vehicle's designated seating capacity The load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight, and dividing by two Production options weight Rim Rim diameter (Wheel diameter - 2013 Toyota 4Runner | Owners Manual - Page 955
determined by distributing to each axle its share of curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1* below), and dividing by two The surface area of the rim not covered by the inflated tire The part of the tire that is made of steel wires, wrapped - 2013 Toyota 4Runner | Owners Manual - Page 956
that must always face outward when mounted on a vehicle A tire designated by its manufacturer as primarily intended for use on lightweight trucks or maximum cold inflation pressure to which a tire may be inflated The rim on which a tire is fitted for physical dimension requirements Any parting at - 2013 Toyota 4Runner | Owners Manual - Page 957
, that, when mounted on an automotive wheel, provides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to the centerline of the tread A tire designed to operate at higher loads and - 2013 Toyota 4Runner | Owners Manual - Page 958
the snow traction test as described in ASTM F-1805-00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow-and section running circumferentially around a tire Pulling away of the tread from the tire carcass The projections within the principal grooves designed to - 2013 Toyota 4Runner | Owners Manual - Page 959
Designated seating capacity, Number of occupants 2 through 4 5 through 10 Vehicle normal load, Number of occupants 2 3 Occupant distribution in a normally loaded vehicle 2 in front 2 in front, 1 in second seat 2 in front, 1 in second seat, 1 in third seat, 1 in fourth seat 2 in front - 2013 Toyota 4Runner | Owners Manual - Page 960
by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota setting Off Off Smart key system and wireless remote control (→P. 35, 49) Open door warning function (when locking the vehicle) Automatic door locking function (if a - 2013 Toyota 4Runner | Owners Manual - Page 961
sensor sensitivity Time elapsed before headlights automatically turn off after doors are closed On Level 3 Off Levels 1 to 5 Off 30 seconds 60 seconds 6 90 seconds Vehicle specifications Automatic light control system (→P. 203) Ambient light level at which instrument illumination begins to - 2013 Toyota 4Runner | Owners Manual - Page 962
Vehicles with a smart key system: Operation when you approach the vehicle with the electronic key on your person (When the interior light switch [ON/DOOR/ OFF] is DOOR) Footwell lights Overhead courtesy light Interior light control Interior light dimmer control while driving On Off On Off On - 2013 Toyota 4Runner | Owners Manual - Page 963
with a smart key system: Operation when you approach the vehicle with the electronic key on your person Operation when the doors are unlocked using the wireless remote control, key or entry function Operation when the doors are unlocked using the door lock switch Time period before lights turn off - 2013 Toyota 4Runner | Owners Manual - Page 964
6-2. Customization Item Function Wiper operates automatically when washer is operated Drip prevention function Default activates Vehicles without a smart key system: Close operation linked to door lock operation using a key Vehicles without a smart key system: Open operation linked to door unlock - 2013 Toyota 4Runner | Owners Manual - Page 965
6-2. Customization Item Function Vehicles with a smart key system: Time required to press and hold the switch before the window begins to open/close Default setting Customized setting 1 second Power back window (→P. 101) 0.8 seconds 1.2 - 2013 Toyota 4Runner | Owners Manual - Page 966
6 -3 . I nit ia liza t ion I t e m s t o init ia lize The following item must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item Maintenance data When to initialize After the - 2013 Toyota 4Runner | Owners Manual - Page 967
exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800 - 2013 Toyota 4Runner | Owners Manual - Page 968
ow ners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité ● Déroulez la sangle diagonale - 2013 Toyota 4Runner | Owners Manual - Page 969
Entretien et soin - 2013 Toyota 4Runner | Owners Manual - Page 970
ow ners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. CTH17AS103 Airbag SRS frontaux Airbag conducteur/airbag passager avant SRS - 2013 Toyota 4Runner | Owners Manual - Page 971
Airbags SRS latéraux et rideau Airbags SRS latéraux Participent - 2013 Toyota 4Runner | Owners Manual - Page 972
Composition du système de sacs de sécurité gonflables SRS CTH17AS155 Airbags latéraux Témoins indicateurs "AIR BAG ON" et "AIR BAG OFF" Airbags rideau Airbag passager avant Airbags de genoux Capteurs d'airbags latéraux et rideau Prétensionneurs de ceintures de sécurité et limiteurs de - 2013 Toyota 4Runner | Owners Manual - Page 973
Votre véhicule est équipé d'AIRBAGS INTELLIGENTS conçus selon les normes de sécurité américaines applicables aux véhicules - 2013 Toyota 4Runner | Owners Manual - Page 974
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 975
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 976
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 977
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 978
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 979
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 980
la position "ON". Véhicules équipés d'un système d'accès et de démarrage "mains libres": Le témoin "RSCA OFF" s'allume. (Uniquement lorsque le bouton "ENGINE START STOP" est en mode DÉMARRAGE). La fonction de détection de retournement des airbags rideau et des prétensionneurs de ceintures de sécurit - 2013 Toyota 4Runner | Owners Manual - Page 981
ATTENTION - 2013 Toyota 4Runner | Owners Manual - Page 982
A-TRAC AUTO LSD AUX CRS DAC ECU EDR ELR GAWR GCWR GVWR I/M KDSS LATCH LED LSD MAX MIN MMT 2 Wheel Drive 4 Wheel Drive Air Conditioning Anti-lock Brake System Accessory Artificial Intelligence Shift control Automatic Locking Retractor Active traction control system Automatic Limited Slip Differential - 2013 Toyota 4Runner | Owners Manual - Page 983
TRAC TWR VIN VSC Mud and Snow MEANING Methyl Tertiary Butyl Ether On Board Diagnostics Roll sensing of curtain shield airbag Supplemental Restraint System Tire Identification Number Tire Pressure Warning System Traction Control Trailer Weight Rating Vehicle Identification Number Vehicle Stability - 2013 Toyota 4Runner | Owners Manual - Page 984
tire P. 113 Engine immobilizer system The engine does not start P. 620 If the engine will not start engine coolant temperature gauge enters the red zone P. 631 If your vehicle overheats Steam can be seen coming from under the hood The key is lost P. 623 If you lose your keys The battery runs - 2013 Toyota 4Runner | Owners Manual - Page 985
What to do if... Vehicles with non-Optitron type meters CTHPIAS105 Vehicles with Optitron type meters CTHPIAS106 701 4RUNNER_U - 2013 Toyota 4Runner | Owners Manual - Page 986
What to do if... - 2013 Toyota 4Runner | Owners Manual - Page 987
592 Multi-terrain Select indicator light*3 P. 592 Automatic running boards indicator light*1 P. 592 Four-wheel drive indicaP. 592 tor light*2 Low speed four-wheel drive P. 592 indicator light*2 *1: The light flashes to indicate a malfunction. *2: The light flashes rapidly to indicate a malfunction - 2013 Toyota 4Runner | Owners Manual - Page 988
catch lever P. 525 Fuel filler door P. 109 CTHPIAS103 Hood lock release lever P. 525 Tire inflation pressure P. 647 Fuel tank capacity (Reference) Fuel type 23.0 gal. (87.0 L, 19.1 Imp. gal.) Unleaded gasoline only P. 640 Cold tire inflation pressure Engine oil capacity (Drain and refill