2013 Toyota Sienna Navigation Manual
2013 Toyota Sienna Manual
2013 Toyota Sienna manual content summary:
- 2013 Toyota Sienna | Navigation Manual - Page 1
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation 1 D Display operation ...22 D Initial screen ...23 D Touch screen operation ...25 D Inputting letters and numbers/List screen operation ...25 D Function help ...29 D Map screen operation ...Current position display ... - 2013 Toyota Sienna | Navigation Manual - Page 2
positions 1 , 2 , 3 and then back to 0 in the reverse order. If the engine switch is set at OFF, the display will automatically move back to position 0 . The it is moving. It could damage your navigation system. INFORMATION Under extremely cold conditions, the display may react slowly or operation - 2013 Toyota Sienna | Navigation Manual - Page 3
1U5001F When the engine switch is in "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating. buttons on the "Information" screen are touched, the screen will change back to "CAUTION" screen and then change to the map screen in about 5 seconds later or if - 2013 Toyota Sienna | Navigation Manual - Page 4
the "Information" screen will be displayed when the navigation system is in operation. D Memo information This system notifies about a memo entry. At the specified date, the memo information will be displayed when the navigation system is in operation. The memo information screen will be displayed - 2013 Toyota Sienna | Navigation Manual - Page 5
via the touch screen. INFORMATION NOTICE D To prevent damaging the screen, lightly touch the screen buttons with your finger. D Do not use objects other may damage the touch screen. Keyboard layout can be changed. (See page 110.) INFORMATION D If the system does not respond to a touch on a touch - 2013 Toyota Sienna | Navigation Manual - Page 6
BASIC FUNCTIONS D To input letters To display the alphabet keys, touch "A−Z" or " ". D To input numbers and symbols To display the number keys and symbol keys, touch "0−9". 1U5005F Enter letters by touching the alphabet keys directly. Touching this button erases one letter. By holding this button - 2013 Toyota Sienna | Navigation Manual - Page 7
a time. 1U5008F This expresses a displayed screen position. INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9999, the system displays on the screen. If appears to the right of the item name, the complete name is too - 2013 Toyota Sienna | Navigation Manual - Page 8
2. Select the desired sorting criteria. Sorting criteria are as follows: "Distance": To sort in the order of distance from your current location. "Date": To sort in the order of the date. "Category": To sort in the order of the category. "Icon": To sort in the order of the icons. "Name": To sort - 2013 Toyota Sienna | Navigation Manual - Page 9
Current position display When starting the navigation system, the current position is displayed first. This screen displays the current vehicle position soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page - 2013 Toyota Sienna | Navigation Manual - Page 10
destination using the one−touch scroll function. 1U5016F 1U5017F Use the scroll feature to move the desired point to the center of the screen for looking proceeds along the designated route. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route - 2013 Toyota Sienna | Navigation Manual - Page 11
BASIC FUNCTIONS D To register the cursor position as a memory point Memory point registration enables easy access to a specific point. To change the icon or name, etc., see " - Editing memory points" on page 96. Up to 106 memory points can be registered. If there is an attempt - 2013 Toyota Sienna | Navigation Manual - Page 12
BASIC FUNCTIONS D To see information about the icon where the cursor is set POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed on the top of the screen. 1U5021F 1U5022F To display information about an icon, set the cursor on it. Touch "Info.". 1U5060F - 2013 Toyota Sienna | Navigation Manual - Page 13
BASIC FUNCTIONS MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. 1U5024F Touch " - 2013 Toyota Sienna | Navigation Manual - Page 14
See page 35.) 1U5028F 1. Touch this button to display the following screen. : To display the dual map screen. (See page 35.) : To display the compass mode screen. (See page 36.) : To display the turn list screen. (See page 70.) : To display the arrow screen. (See page 70.) : To display the freeway - 2013 Toyota Sienna | Navigation Manual - Page 15
shows the dual map. The map on the left is the main map. The right side map can be edited by touching any specific point on the right side map. 1U5059F This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 118 - 2013 Toyota Sienna | Navigation Manual - Page 16
or heading−up symbol at the top left of the screen. INFORMATION When the vehicle travels out of the coverage area, the guidance screen changes to the compass mode screen. INFORMATION When the map scale is at the maximum range of 250 miles (400 km), is not shown. When the map scale - 2013 Toyota Sienna | Navigation Manual - Page 17
on the map disc. 1U5036F 1. Touch "Info." while the foot print map is displayed. If the map is displayed by a split screen, the map will change into a single map display. 1U5035F To display the foot print map, touch . To delete the foot print map display, touch . INFORMATION D If the map or - 2013 Toyota Sienna | Navigation Manual - Page 18
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. 1U5038F Details of POIs in some buildings - 2013 Toyota Sienna | Navigation Manual - Page 19
screen) ...40 D Destination search ...41 Selecting the region to search ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI*" ...Destination search by "Phone #" ...Destination search by "Emergency" ...Destination search - 2013 Toyota Sienna | Navigation Manual - Page 20
memory points, see " - Registering memory points" on page 95.) ...57 6 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...57 7 "Map" A destination can be selected simply by touching the location on the displayed map - 2013 Toyota Sienna | Navigation Manual - Page 21
" screen can be viewed on this screen...29 11 "Del. Dest." Set destinations can be deleted...62 12 "Change" To change the selected region to search, touch this button...42 13 Quick access touch screen buttons One of 5 preset memory points can be selected by touching the screen directly. If a quick - 2013 Toyota Sienna | Navigation Manual - Page 22
a different region by using "Address", "POI", "Freeway Ent./Exit" or "Intersection". 2U5069F 2U5004aF 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 regions. (For map database information and updates, see "Map database information and - 2013 Toyota Sienna | Navigation Manual - Page 23
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in - 2013 Toyota Sienna | Navigation Manual - Page 24
memory point. (To register "Home", see page 102.) 2U5072F 2. Touch any of the quick access touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See "Starting route guidance" on page 63.) If a quick - 2013 Toyota Sienna | Navigation Manual - Page 25
to input a house number. After inputting a house number, touch "OK" to display the screen for inputting a street name. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2U5010F 2. Input the street name and touch "List". 45 - 2013 Toyota Sienna | Navigation Manual - Page 26
Starting route guidance" on page 63.) If the same address exists in more than one city, the current screen changes to the city list screen. 2U5013F If inputting a street name first, the screen changes. The house number can then be input. 2U5014F If the above screen appears, an address range on the - 2013 Toyota Sienna | Navigation Manual - Page 27
the displayed list. "Map": To display the selected destination and the route preference. (See "Starting route guidance" on page 63.) The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 45.) INFORMATION - 2013 Toyota Sienna | Navigation Manual - Page 28
5 Cities". SELECTING FROM THE LAST 5 CITIES 2U5074F 2U5020F 2. Touch the button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 45.) Touch the - 2013 Toyota Sienna | Navigation Manual - Page 29
the Point of Interest. 2U5075F 3. Touch the button for the desired method. 2U5023F 2. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) When inputting the - 2013 Toyota Sienna | Navigation Manual - Page 30
the last 5 cities INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 80.) INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 50 - 2013 Toyota Sienna | Navigation Manual - Page 31
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2U5027F 2. Input the city name. 2U5029F 2. Touch the button of the desired city name. 2U5028F 3. Touch the button of the desired city name from the displayed - 2013 Toyota Sienna | Navigation Manual - Page 32
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES D Selecting from the categories 2U5077F Touch the button of the desired city name. If the navigation has never been used, no cities will be displayed on the screen. 2U5031F Touch "Category". 2U5032F If the desired POI category is on the screen - 2013 Toyota Sienna | Navigation Manual - Page 33
DESTINATION SEARCH (b) Search by "Category" The destination can be set by selecting the search point and the POI category. INPUTTING THE CITY CENTER 1. Touch "Input City Center". 2U5035F Set the search point by the following method: 1. Input the city center 2. Set the current position as the - 2013 Toyota Sienna | Navigation Manual - Page 34
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". 2U5039F When an arrow facing the desired - 2013 Toyota Sienna | Navigation Manual - Page 35
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. 2U5040F When an arrow facing the desired point is touched, - 2013 Toyota Sienna | Navigation Manual - Page 36
than one site having the same number, the following screen will be displayed. 2U5044F By touching the button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) The direction arrows - 2013 Toyota Sienna | Navigation Manual - Page 37
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2013 Toyota Sienna | Navigation Manual - Page 38
want to delete. "Delete All": To delete all previous points in the system. 2U5081F 2U5082F The previous starting point and up to 100 previously set screen. 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route - 2013 Toyota Sienna | Navigation Manual - Page 39
while driving. However, the cursor cannot be moved. 2U5051F 4. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) 59 - 2013 Toyota Sienna | Navigation Manual - Page 40
Ent./Exit" on the second page of the "Destination" screen. 2U5106X 2U5052F If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2013 Toyota Sienna | Navigation Manual - Page 41
"Coordinates" on the second page of the "Destination" screen. 2U5055F 2U5056F 5. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) "Input Name": An - 2013 Toyota Sienna | Navigation Manual - Page 42
set, a list will be displayed on the screen. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. INFORMATION Set destinations can also be deleted by touching "Route". (See " - Deleting - 2013 Toyota Sienna | Navigation Manual - Page 43
finger from the arrow will stop the scrolling. 2. Touch "Enter". The system starts route search and displays recommended routes. If there is already a start guidance, touch "Guide". "3 Routes": To select the desired route from three possible routes. (See page 65.) "Route": To change the route. (See - 2013 Toyota Sienna | Navigation Manual - Page 44
change the route before starting INFORMATION D Guidance can be suspended or resumed. (See "Suspending and resuming guidance" on page 90.) D If "Guide" is touched until a beep sounds, demo mode will start. Push the "MAP/VOICE" button to finish Demo mode for a route, the system will avoid routes when - 2013 Toyota Sienna | Navigation Manual - Page 45
by ferry, the route guidance shows a sea route. After you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. 2U5063F 1. To select the desired route from three routes, touch "3 Routes". 2U5064F 2. Touch "Quick1", "Quick2" or - 2013 Toyota Sienna | Navigation Manual - Page 46
DESTINATION SEARCH 2U5065F 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 66 - 2013 Toyota Sienna | Navigation Manual - Page 47
ROUTE GUIDANCE SECTION ROUTE GUIDANCE 3 D Route guidance screen ...68 D Typical voice guidance prompts ...71 D Distance and time to destination ...73 D Setting and deleting destination ...74 Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Search - 2013 Toyota Sienna | Navigation Manual - Page 48
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the - 2013 Toyota Sienna | Navigation Manual - Page 49
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2013 Toyota Sienna | Navigation Manual - Page 50
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays - 2013 Toyota Sienna | Navigation Manual - Page 51
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 3U5120X 3U5119X 1 "Proceed about 4 miles to the traffic circle." "In a - 2013 Toyota Sienna | Navigation Manual - Page 52
"In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) 2 3 INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice - 2013 Toyota Sienna | Navigation Manual - Page 53
ROUTE GUIDANCE Distance and time to destination The distance, the estimated travel time and the estimated arrival time from the current position to the selected destination are displayed. 3U5007F When the vehicle is on the guidance route, the distance and the estimated travel/arrival time to the - 2013 Toyota Sienna | Navigation Manual - Page 54
done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 3U5009F 1. Touch "Route". 3U5012F 1. button. Reordered number of arrival is displayed on the right side of the screen. Touching "Undo" will cancel each selected order number - 2013 Toyota Sienna | Navigation Manual - Page 55
ROUTE GUIDANCE - Deleting destinations 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few - 2013 Toyota Sienna | Navigation Manual - Page 56
. If "No" is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate the route conditions of the route to the destination. 3U5018F - 2013 Toyota Sienna | Navigation Manual - Page 57
route where a delay is caused by road repairs, or an accident, etc. 3U5021F The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 74 and 76.) 3U5022F 1. Touch "Route". 3U5023F 2. Touch "Detour". 77 - 2013 Toyota Sienna | Navigation Manual - Page 58
information received from XMr NavTraffic. For details, see "XMr NavTraffic" on page 118. 3U5123X This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This - 2013 Toyota Sienna | Navigation Manual - Page 59
"Route". 1. Touch "Route". 3U5026F 3U5029F 2. Touch "Route Preference" to change the conditions that determine the route to the destination. 2. Touch "Start from by touching the button. When searching for a route, the system will avoid routes when the indicator is off. 4. After choosing the desired route - 2013 Toyota Sienna | Navigation Manual - Page 60
- - Display POI icons Points of Interest such as gas stations and restaurants can be displayed on the map screen for the nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 81.) 3U5031F 2. Touch " - 2013 Toyota Sienna | Navigation Manual - Page 61
ROUTE GUIDANCE Touch "Other POIs" on the "Display POI icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols of those locations on the map screen. D To display the local POI list Points of Interest that are - 2013 Toyota Sienna | Navigation Manual - Page 62
guidance" on page 63.) 3U5040F 2. Touch "Route Overview". 3U5041F The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 74 and 76.) "Turn List": The following screen displays the list of the roads up to the - 2013 Toyota Sienna | Navigation Manual - Page 63
. However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the - 2013 Toyota Sienna | Navigation Manual - Page 64
(200 km) and retrace the route on the display. 3U5046F INFORMATION This feature is available on the map with more detailed map scale than 30 miles ( in fast−forward mode. : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to - 2013 Toyota Sienna | Navigation Manual - Page 65
ROUTE GUIDANCE 3U5048F "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. 3U5049F Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the - 2013 Toyota Sienna | Navigation Manual - Page 66
ROUTE GUIDANCE 86 - 2013 Toyota Sienna | Navigation Manual - Page 67
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use 4 D Quick reference ("Menu" screen) ...88 D Quick reference ("Setup" screen) ...89 D Suspending and resuming guidance ...90 D Volume ...91 D User selection ...92 D My places ...94 Registering memory - 2013 Toyota Sienna | Navigation Manual - Page 68
help for the "Menu" screen can be viewed on this screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...194 1 5 "Select User 7 "Setup" Enables various settings for the navigation system...89, 108 8 "My Places" Enables changes to "Memory points", "Home" and "Areas - 2013 Toyota Sienna | Navigation Manual - Page 69
" can be selected...109 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the set...109 3 "Keyboard Layout" Key layout can be changed...110 4 "Time Zone" The desired time zone can in All Modes" Voice guidance can be set in all modes...114 10 "Auto Voice Guidance" - 2013 Toyota Sienna | Navigation Manual - Page 70
either ON or OFF to display the pop−up message is possible...115 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...116 13 "Default" This touch screen button initializes all of the settings...108 14 "?" Function help for the "Setup" screen can be viewed...29 - 2013 Toyota Sienna | Navigation Manual - Page 71
Guidance". U4001SENI 1. Push the "MENU" button. 4U5004F 4U5087F The screen will change to the current position map with route guidance. 2. Touch "Volume". 4U5006F To is not needed, touch "OFF" to disable the feature. When selected the number or "OFF" will be highlighted. 3. Touch "OK" to - 2013 Toyota Sienna | Navigation Manual - Page 72
the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning " will be highlighted. The system can memorize the following settings for up to three users. D Map direction D Map scale D Map configuration D Guidance mode D Setup D Volume - 2013 Toyota Sienna | Navigation Manual - Page 73
ADVANCED FUNCTIONS D To register D To change user 4U5008F 1. Touch "Memorize". The confirmation screen will be displayed. 4U5011F Touch "User number". 4U5012F 4U5009F The above message appears, then the map screen will - 2013 Toyota Sienna | Navigation Manual - Page 74
The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 44, " - Destination search by Quick access" on page 44 and " - Destination search by "Memory"" on page 57.) Registered areas are avoided at the time of route search. 4U5013F 1. Touch "Delete - 2013 Toyota Sienna | Navigation Manual - Page 75
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 4U5016F 4U5017F On this screen, the following operations can be performed. 1 Registers memory points (See " - Registering memory points" on page 95.) 2 Edits memory points (See " - - 2013 Toyota Sienna | Navigation Manual - Page 76
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 4U5019F 5. Touch "OK". To edit registered information, see " - Editing memory - 2013 Toyota Sienna | Navigation Manual - Page 77
D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 4U5022F 4U5023F 5. Touch the button to be edited. "Icon": To select icons to be displayed on the map. (See page 97.) "Quick Access": To set an attribute. Memory points with a set attribute can be used as a "Quick access" or "Home - 2013 Toyota Sienna | Navigation Manual - Page 78
sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or "Home" touch screen button. (See " - Destination search by - 2013 Toyota Sienna | Navigation Manual - Page 79
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 4U5028F 4U5030F 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be - 2013 Toyota Sienna | Navigation Manual - Page 80
ADVANCED FUNCTIONS DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 4U5031F To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch " - 2013 Toyota Sienna | Navigation Manual - Page 81
ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. 1. Push the be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 101 - 2013 Toyota Sienna | Navigation Manual - Page 82
ADVANCED FUNCTIONS - Registering home If home has been registered, that information can be recalled by using the "Home" touch screen button on the "Destination" screen. (See " - Destination search by Home" on page 44.) 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. When - 2013 Toyota Sienna | Navigation Manual - Page 83
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My - 2013 Toyota Sienna | Navigation Manual - Page 84
area size of a registered area can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 4U5043F 7. Touch either or to change the size of the area to be avoided. 8. Touch "OK". 4U5044F 3. Touch "Edit". INFORMATION D If a destination is input in the area to avoid or the - 2013 Toyota Sienna | Navigation Manual - Page 85
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. 107.) "Active": To turn on or off the area to avoid feature. To turn on the feature touch "ON" on the "Edit Area to Avoid" screen. To turn off the feature touch "OFF" on the "Edit Area to Avoid" screen. 6. - 2013 Toyota Sienna | Navigation Manual - Page 86
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. 4U5048F To show the name, touch "ON" on the "Edit Area to Avoid" screen. To - 2013 Toyota Sienna | Navigation Manual - Page 87
"Edit Area to Avoid" screen. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 4U5049F 4U4051F 3. Touch "Delete". 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 4U5052F 4. Touch the button to be deleted - 2013 Toyota Sienna | Navigation Manual - Page 88
Points". U4001SENI 1. Push the "MENU" button. 4U5054F 4. Touch the button you want to delete. "Delete All": To delete all previous points in the system. 4U5093F 2. Touch "Setup". 4U5094F 4U5055F 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No - 2013 Toyota Sienna | Navigation Manual - Page 89
ADVANCED FUNCTIONS D Unit of Measurement Unit of Measurement can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D Estimated travel time The speed that is used for the calculation of the estimated travel - 2013 Toyota Sienna | Navigation Manual - Page 90
by road conditions such as traffic jams, and construction work. D It is possible to display up to 99 hours 59 minutes. Key layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 4U5097F 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the input key layout - 2013 Toyota Sienna | Navigation Manual - Page 91
. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 4U5062F " "ABC" type 4U5098F 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. 4U5063F " "QWE" type The selected button is highlighted. 4. Touch "OK". 4U5065F 4. - 2013 Toyota Sienna | Navigation Manual - Page 92
current street name on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the icons to be displayed - 2013 Toyota Sienna | Navigation Manual - Page 93
ADVANCED FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To turn the "Display Building Shapes" - 2013 Toyota Sienna | Navigation Manual - Page 94
display page 2 of the Then touch "Setup" screen. D Voice guidance in all modes When the "Voice Guidance in All Modes" feature is turned on, the voice guidance in all modes can be heard. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio - 2013 Toyota Sienna | Navigation Manual - Page 95
is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn the "Auto Voice Guidance" mode on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen - 2013 Toyota Sienna | Navigation Manual - Page 96
be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. twice to display page 3 of Then touch the "Setup" screen. 4U5077F This message appears when the system is in the POI mode and the - 2013 Toyota Sienna | Navigation Manual - Page 97
/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 3. Touch "Enter". 4U5083F 4U5081F 1. Touch "Position/Direction". 4. Touch - 2013 Toyota Sienna | Navigation Manual - Page 98
allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, an additional genuine Toyota satellite receiver and antenna must be purchased and installed, and the subscription - 2013 Toyota Sienna | Navigation Manual - Page 99
Traffic information is displayed on the map. (See page 120.) 2 Auto Avoid Traffic If any heavy congestion or moderate traffic has been detected on it may be possible for you to select another route offered by the system. (See page 121.) 3 Traffic Voice Guidance Traffic information is provided - 2013 Toyota Sienna | Navigation Manual - Page 100
XMr NavTraffic information has been received, the XMr NavTraffic information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow": Moderate traffic "Green": Freely flowing traffic 2 4U5110F " Freeway - 2013 Toyota Sienna | Navigation Manual - Page 101
XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": . (b) Auto Avoid Traffic The guidance route automatically changes to another route to avoid heavy congestion. 4U5112F Touch "ON" of the "Auto Avoid Traffic - 2013 Toyota Sienna | Navigation Manual - Page 102
ADVANCED FUNCTIONS (c) Traffic Voice Guidance You can receive congestion information through voice guidance while being guided to your destination. (d) Show Free Flowing Traffic Freely flowing traffic is shown with the arrow. 4U5113F Touch "ON" of the "Traffic Voice Guidance". 4U5114F Touch " - 2013 Toyota Sienna | Navigation Manual - Page 103
ADVANCED FUNCTIONS (e) XMr NavTraffic text information When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. 5U5B03F 1. Touch "Info." to display the "Traffic Information" screen. 5U5B04F 2. Touch "Detail" to display detailed - 2013 Toyota Sienna | Navigation Manual - Page 104
ADVANCED FUNCTIONS 124 - 2013 Toyota Sienna | Navigation Manual - Page 105
OTHER FUNCTIONS SECTION OTHER FUNCTIONS D Maintenance information ...Maintenance information setting ...Dealer setting ...D Calendar with memo ...Adding a memo ...Editing a memo ...Memo list ...D Screen adjustment ... 5 126 126 128 130 132 133 133 135 D Screen setting ...136 D Beep setting ...139 - 2013 Toyota Sienna | Navigation Manual - Page 106
maintenance information with the "Information" screen when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color will change to orange. 1. Push the "INFO" button. 5U5B09F 2. Touch - 2013 Toyota Sienna | Navigation Manual - Page 107
": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system - 2013 Toyota Sienna | Navigation Manual - Page 108
OTHER FUNCTIONS - Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on - 2013 Toyota Sienna | Navigation Manual - Page 109
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 5U5006F 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous - 2013 Toyota Sienna | Navigation Manual - Page 110
edit "Phone #" (telephone number) 1. Touch "Phone #" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 24.) Memos can also be used for route guidance if the memo has been - 2013 Toyota Sienna | Navigation Manual - Page 111
a memo" on page 132.) "Mark f": To change the color of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the - 2013 Toyota Sienna | Navigation Manual - Page 112
OTHER FUNCTIONS - Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 24.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to add a memo on the "Calendar" screen. - 2013 Toyota Sienna | Navigation Manual - Page 113
(See page 134.) 5U5017F 5. Touch the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 132.) "Location": To change a registered location. (See " - Adding a memo" on page 132.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page - 2013 Toyota Sienna | Navigation Manual - Page 114
OTHER FUNCTIONS D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 5U5019F 5. To delete and/or edit the memo, touch the desired memo button. "Delete All": To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To - 2013 Toyota Sienna | Navigation Manual - Page 115
Screen adjustment You can adjust the brightness and contrast of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness adjustment The brightness or contrast of the screen can be adjusted depending on the brightness of your - 2013 Toyota Sienna | Navigation Manual - Page 116
the screen in the day mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 5U5B11F - 2013 Toyota Sienna | Navigation Manual - Page 117
(a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch screen buttons. 5U5A83F Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically - 2013 Toyota Sienna | Navigation Manual - Page 118
OTHER FUNCTIONS (c) Delete personal data The following personal data can be deleted or returned to their default settings: D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings This function is - 2013 Toyota Sienna | Navigation Manual - Page 119
can set a beep sound off. Selecting a language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. U5001SENI U5001SENI 1. Push the "INFO" button. 1. Push the "INFO" button. 5U5B12F 5U5B02F 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the - 2013 Toyota Sienna | Navigation Manual - Page 120
OTHER FUNCTIONS 5U5B01F 3. Touch "English", "Français" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is - 2013 Toyota Sienna | Navigation Manual - Page 121
AUDIO SYSTEM SECTION AUDIO SYSTEM 6 143 147 155 166 D Quick reference ...142 D Using your audio system ...143 Some basics ...Radio operation ...CD player operation ...D Audio remote controls ... D Audio system operating hints ...167 141 - 2013 Toyota Sienna | Navigation Manual - Page 122
choose an AM or SAT station. For details, see pages 144 and 147. "TUNE·SEEK/TRACK" button Push either side of this button to step up or down the frequency, or to access a desired track or file. For details, see pages 147, 148, 151, 158 and 162. "PWR·VOL" knob Push this - 2013 Toyota Sienna | Navigation Manual - Page 123
the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. U6001SENI CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not expressly approved by the party - 2013 Toyota Sienna | Navigation Manual - Page 124
button to turn on the desired mode. The selected mode turns on immediately. Push these buttons if you want to switch from one mode to another. If the disc is not inserted, the "CD" screen will not appear. 6U5D71aF 6U5D72aF The function buttons for radio and CD player operation are displayed on the - 2013 Toyota Sienna | Navigation Manual - Page 125
AUDIO SYSTEM Touch them lightly and directly on the screen. The selected button is and right stereo channels and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the - 2013 Toyota Sienna | Navigation Manual - Page 126
Adjusts sound balance between the front and rear speakers. "L" or "R": Adjusts sound balance between the left and right speakers. 4. Touch "OK". The tone of each mode (for such as AM, FM1 and CD player) can be adjusted. NOTICE Never try to disassemble or oil any part of the CD player. Do not insert - 2013 Toyota Sienna | Navigation Manual - Page 127
" appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "AM·SAT" button, "AM", "SAT1", "SAT2", " or " " sides of the "TUNE·SEEK/TRACK" button to step up or step down the station band. Your radio automatically changes to stereo reception when - 2013 Toyota Sienna | Navigation Manual - Page 128
AUDIO SYSTEM D Presetting a the station frequency appears on the screen. Seek tuning: Push " " or " " sides of the "TUNE·SEEK/TRACK" button and hold it until you hear a beep. on the touch screen button. Each radio mode can store up to 6 stations. To change the preset station to a different one, - 2013 Toyota Sienna | Navigation Manual - Page 129
SYSTEM - Radio operation (XMr Satellite Radio broadcast) To listen to a satellite radio broadcast in your vehicle, an additional genuine Toyota satellite receiver and antenna must be purchased and installed the radio ID when activating XMr service or when reporting a problem. If you select the "CH - 2013 Toyota Sienna | Navigation Manual - Page 130
AUDIO SYSTEM D Listening to satellite radio D Channel category U6005SENI 6U5D80F Touch either Besides "AM", "SAT1", "SAT2" or "SAT3" appears on the display. U6004SENI Push " " or " " sides of the "TUNE·SEEK/TRACK" button to select the next or previous channel. If you turn continuously, you can - 2013 Toyota Sienna | Navigation Manual - Page 131
AUDIO SYSTEM D Presetting display. To select channel within the current category: Push " " or " " sides of the "TUNE·SEEK/TRACK" button. The radio will step up or down . Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure - 2013 Toyota Sienna | Navigation Manual - Page 132
then scan again. To select a channel, touch "TYPE SCAN" a second time. 6U5D83F When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "TEXT" again, the - 2013 Toyota Sienna | Navigation Manual - Page 133
SYSTEM D If the satellite radio tuner malfunctions When problems occur with the XMr tuner, a message will appear on the display. Referring to the table below to identify the problem, take the suggested corrective action. The XMr antenna is not connected. Check whether the XMr antenna change feature - 2013 Toyota Sienna | Navigation Manual - Page 134
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment This XMr tuner supports "Audio Services" (Music - 2013 Toyota Sienna | Navigation Manual - Page 135
AUDIO SYSTEM - CD player operation The CD player can play audio CDs, CD text, WMA discs and MP3 discs. D Audio CD, CD text ...158 D MP3/WMA disc ...161 For appropriate discs for this changer, see "Audio system operating hints" on page 167. (a) Inserting discs The engine switch must be set at "ACC" - 2013 Toyota Sienna | Navigation Manual - Page 136
AUDIO SYSTEM CAUTION D Do not place anything on the opened display, as such items may be thrown about and possibly the display while it is moving. It could damage your audio system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 156 - 2013 Toyota Sienna | Navigation Manual - Page 137
AUDIO SYSTEM (b) Ejecting discs (c) Playing a disc U6006SENI U6007SENI Push the " " button. The display will open and the disc will be ejected. A disc can then be inserted. Push the "DISC·AUX" button if the disc are already loaded in the CD player. The "CD" screen will be displayed. NOTICE - 2013 Toyota Sienna | Navigation Manual - Page 138
U6004SENI "TUNE·SEEK/TRACK" button: Use for a direct access to a desired track. Push " " or " " sides of the "TUNE·SEEK/TRACK" button and repeat it until the desired track number appears on the screen. As you release the button, the CD player will start playing the selected track from the beginning - 2013 Toyota Sienna | Navigation Manual - Page 139
AUDIO SYSTEM D Searching for a desired track 6U5D85aF Touch the desired track number. The CD player will start sides of the "TUNE·SEEK/TRACK" button and hold it to fast forward the disc. When you release the button, the CD player will resume playing from that position. Reverse: Push " " sides - 2013 Toyota Sienna | Navigation Manual - Page 140
, the CD player will automatically go back to the beginning of the track and play the track again. To cancel it, touch "RPT" once again. "RAND": Use it for automatic and random selection. While the disc is playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a track - 2013 Toyota Sienna | Navigation Manual - Page 141
AUDIO SYSTEM (e) Operating a MP3/WMA disc D Playing a MP3/WMA disc D Selecting a disc number to display this screen. 6U5D89aF Touch the desired folder number. The changer will start playing the first file of the selected folder. : By touching this button, the list moves up by 6 folder groups. - 2013 Toyota Sienna | Navigation Manual - Page 142
·SEEK/TRACK" button: Use for direct access to a desired file. Push " " or " " sides of the "TUNE·SEEK/TRACK" button sides of the "TUNE·SEEK/TRACK" button and hold it to fast forward the disc. When you release the button, the CD player will resume playing from that position. Reverse: Push " " sides - 2013 Toyota Sienna | Navigation Manual - Page 143
AUDIO SYSTEM D Searching for a desired file 6U5D91aF Touch the desired file number. The CD player will start playing the selected file from the beginning. : By touching this button, the list moves up by 6 file groups. If this button is touched - 2013 Toyota Sienna | Navigation Manual - Page 144
AUDIO SYSTEM D Searching for a desired folder D Other functions 6U5D93aF While the disc file is playing, touch"RPT" briefly. "RPT" appears on the screen. When the file is finished, the CD player will automatically go back to the beginning of the file and play the file again. To cancel it, touch " - 2013 Toyota Sienna | Navigation Manual - Page 145
appear on the screen. For appropriate discs for this player, see "Audio system operating hints" on page 167. If "CD Error" appears on the display: The following causes are possible. D There is a trouble inside the system. Eject the disc. D The inside of the player unit may be too hot due to the very - 2013 Toyota Sienna | Navigation Manual - Page 146
side to decrease the volume. The volume continues to decrease while the switch is being pressed. 2 "MODE" switch Each time you push the "MODE" switch, the system changes the audio mode. To turn the audio system on, push the "MODE switch in seek mode, the seek mode will cancel. CD player Use this - 2013 Toyota Sienna | Navigation Manual - Page 147
two signals to reach your antenna at the same time. If player. INFORMATION The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. Radio reception Usually, the problem - 2013 Toyota Sienna | Navigation Manual - Page 148
system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise and playback errors, use the appropriate file extensions. D The player can play only the first - 2013 Toyota Sienna | Navigation Manual - Page 149
AUDIO SYSTEM 6U5161aX Folder 3 006.mp3 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004. The unit may be unable to play some damaged discs. D If you insert a CD−RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot - 2013 Toyota Sienna | Navigation Manual - Page 150
AUDIO SYSTEM CARING FOR YOUR CD PLAYER AND DISCS D Your CD player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperature can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or - 2013 Toyota Sienna | Navigation Manual - Page 151
may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed player. D If a disc cannot be ejected, do not forcibly take out the disc. Keep pushing the " " button for approximately 5 seconds and release it. At this time, the audio disc and the map DVD - 2013 Toyota Sienna | Navigation Manual - Page 152
fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their - 2013 Toyota Sienna | Navigation Manual - Page 153
AUDIO SYSTEM TERMS Packet write- This is a general term that describes the process of writing data on−demand to CD−R, etc., in the same way that data - 2013 Toyota Sienna | Navigation Manual - Page 154
AUDIO SYSTEM 174 - 2013 Toyota Sienna | Navigation Manual - Page 155
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM 7 D Rear view monitor system ...176 175 - 2013 Toyota Sienna | Navigation Manual - Page 156
. When backing up, be sure to check behind and all around the vehicle visually and with mirrors before proceeding. D Do not use the system when the back door is not completely closed. D If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud adhere to - 2013 Toyota Sienna | Navigation Manual - Page 157
MONITOR SYSTEM with mirror before proceeding. D Do not use the system in camera has a water proof construction, do not detach, disassemble or modify it. This may cause incorrect operation. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system - 2013 Toyota Sienna | Navigation Manual - Page 158
REAR VIEW MONITOR SYSTEM D Area displayed on screen Image is displayed approximately level on screen. U7002SENI The area displayed on the screen may vary according to vehicle orientation or road conditions. U7001SENI On screen Corners of bumper The area covered by the camera is limited. The - 2013 Toyota Sienna | Navigation Manual - Page 159
that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. The rear view monitor system camera is located on the back door as shown in the - 2013 Toyota Sienna | Navigation Manual - Page 160
REAR VIEW MONITOR SYSTEM 180 - 2013 Toyota Sienna | Navigation Manual - Page 161
APPENDIX SECTION APPENDIX 8 D Limitations of the navigation system ...182 D Map database information and updates ...184 181 - 2013 Toyota Sienna | Navigation Manual - Page 162
case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna - 2013 Toyota Sienna | Navigation Manual - Page 163
calibration correctly. D After repeating a change of direction by going forward and backward, or turning on a turntable in the parking lot. D When leaving a covered parking lot or parking garage. D When a roof carrier is installed. D When driving with tire chains installed. D When the tires are worn - 2013 Toyota Sienna | Navigation Manual - Page 164
- After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 118.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or smaller than the originally equipped - 2013 Toyota Sienna | Navigation Manual - Page 165
DATABASE, nor reproduce, copy, duplicate, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which it was created, provided that you do not retain any copy - 2013 Toyota Sienna | Navigation Manual - Page 166
may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. The lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; - 2013 Toyota Sienna | Navigation Manual - Page 167
from any statute, law, regulation, or code, including any Sunshine Act, Public Records Act, Freedom of Information Act, or equivalent, which permits public access and/or reproduction or use of the Licensed Products. In the event that such exemption is challenged under any such laws, this Agreement - 2013 Toyota Sienna | Navigation Manual - Page 168
, non−commercial purposes, and not for service bureau, time−sharing or other similar purposes . You may not decompile, disassemble or reverse engineer any portion of this information, and may not this information with any products, systems, or applications installed or otherwise connected to or - 2013 Toyota Sienna | Navigation Manual - Page 169
holds a non−exclusive license from the United States Postal ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2010. Prices are not established, controlled or approved by the United States Postal ServiceR. The following trademarks and registrations are owned by the USPS - 2013 Toyota Sienna | Navigation Manual - Page 170
system for the solely personal, non−commercial purposes for which you were licensed, and not for service modify, decompile, disassemble or reverse engineer any portion of this Data, and any products, systems, or applications installed or otherwise passage of time, changing circumstances, sources used - 2013 Toyota Sienna | Navigation Manual - Page 171
State of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all disputes, claims - 2013 Toyota Sienna | Navigation Manual - Page 172
−site investigations. However, the names of roads, streets, facilities, and their locations frequently change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally - 2013 Toyota Sienna | Navigation Manual - Page 173
APPENDIX - Changing the map DVD−ROM U4001SENI 7U5167X 1. Push the "MENU" button. 4. Insert the new map DVD−ROM with the label side up. 5. Push the "CLOSEY" button to close the display. 7U5007F 2. Touch "Map DVD". 7U5008F 3. Touch " DVD−ROM. DVD" to eject the map 193 - 2013 Toyota Sienna | Navigation Manual - Page 174
on the opened display, as not obstruct the display while it is moving. It could damage your navigation system. D If a disc cannot be ejected, do not forcibly take out the audio disc and the map DVD−ROM will be ejected. 7U5009F 2. Touch "Map DVD". INFORMATION Under extremely cold conditions, the - 2013 Toyota Sienna | Navigation Manual - Page 175
any interference, including interference that may cause undesired operation of the device. This Category II radiocommunication device complies with Industry Canada Standard RSS−310. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes: (1) il ne doit pas produire de - 2013 Toyota Sienna | Navigation Manual - Page 176
APPENDIX 196 - 2013 Toyota Sienna | Navigation Manual - Page 177
to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense - 2013 Toyota Sienna | Navigation Manual - Page 178
SIENNA_Entry_Navi_U OM45474U Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle - 2013 Toyota Sienna | Navigation Manual - Page 179
passengers. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual - 2013 Toyota Sienna | Navigation Manual - Page 180
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2013 Toyota Sienna | Navigation Manual - Page 181
Quick guide - - Overview buttons and guidance screen 0U5111aX No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button "MENU" button "DISP/TILT" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2013 Toyota Sienna | Navigation Manual - Page 182
display the foot print map and the building information. Touch this button to change the screen mode. Displays the distance, the estimated travel time to the destination, and the time to destination XMr NavTraffic mark "GPS" mark (Global Positioning System) 36 37 15 34 16 73 17 118 18 182 6 - 2013 Toyota Sienna | Navigation Manual - Page 183
- Registering home 1 Push "DEST" button. 2 Touch . If home has not been registered, you can register it by touching . 3 There are 11 different methods to search your home. See "Destination search" on page 41. 4 Touch "Enter". The "Memory Point" screen is displayed. 7 - 2013 Toyota Sienna | Navigation Manual - Page 184
5 Touch "OK". Registration of home is complete. You can also register home by touching the "MENU" button. (See " - Registering home" on page 102.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) 8 - 2013 Toyota Sienna | Navigation Manual - Page 185
) 1 Push "DEST" button. 2 Touch one of the quick access buttons. You can set a memory point to one of the quick access buttons which has not been set. 3 There are 12 different methods to search preset memory points. See "Destination search" on page 41. 4 Touch "Enter". The " - 2013 Toyota Sienna | Navigation Manual - Page 186
. You can also register preset memory points by touching the "MENU" button. (See " - Registering memory points" on page 95.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) The registered points can be used on the "Destination - 2013 Toyota Sienna | Navigation Manual - Page 187
There are 12 different methods to search destinations. See "Destination search" on page 41. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on - 2013 Toyota Sienna | Navigation Manual - Page 188
your home has been registered. (To register "Home", see " - Registering home" on page 102.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on - 2013 Toyota Sienna | Navigation Manual - Page 189
D Map screen operation ...Current position display ...Screen scroll operation ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...Map icons ...D Speech command system ...33 33 34 39 42 42 43 44 44 Command list ...47 25 - 2013 Toyota Sienna | Navigation Manual - Page 190
system - When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the system will begin operating. Vehicles without smart key system - When the engine Information" screen is touched, the screen will change back to the "CAUTION" screen. In about - 2013 Toyota Sienna | Navigation Manual - Page 191
) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation. This system is operated mainly by the touch screen buttons on the screen. When - 2013 Toyota Sienna | Navigation Manual - Page 192
can be input via the touch screen. D To input letters and numbers To display the alphabet keys, touch "A−Z". INFORMATION Keyboard layout can be changed. (See page 255.) Enter letters by touching the keys directly. : Touching this button erases one letter. By holding this button, letters will - 2013 Toyota Sienna | Navigation Manual - Page 193
number of matches is five or less, the list is displayed without touching "OK". INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the - 2013 Toyota Sienna | Navigation Manual - Page 194
. 2. Select the desired sorting criteria. Sorting criteria are as follows: "Distance": To sort in the order of distance from your current location. "Date": To sort in the order of the date. "Category": To sort in the order of the category. "Icon": To sort in the order of the icons. "Name": To sort - 2013 Toyota Sienna | Navigation Manual - Page 195
off, and change the screen to either day or night mode. D Contrast, brightness, color and tone adjustment The contrast, brightness, color and tone of the screen, touch "OK". If your vehicle is equipped with the rear seat entertainment system, the rear screen turns on or off when "Rear" is touched. - 2013 Toyota Sienna | Navigation Manual - Page 196
headlight switch, the screen changes to day mode or night mode. Color and tone adjustment (with rear seat entertainment system) You can also use the remote control to make adjustments. 1. Touch the desired button to adjust color and tone. You can adjust the color and the tone while the DVD video - 2013 Toyota Sienna | Navigation Manual - Page 197
Current position display When starting the navigation system, the current position is displayed first. This screen displays the current vehicle position soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page - 2013 Toyota Sienna | Navigation Manual - Page 198
set as a destination using the one−touch scroll function. Use the scroll feature to move the desired point to the center of the screen for looking vehicle proceeds along the designated route. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route - 2013 Toyota Sienna | Navigation Manual - Page 199
BASIC FUNCTIONS D To register the cursor position as an address book entry Address book entry registration enables easy access to a specific point. To change the icon or name, etc., see " (b) Editing address book entries" on page 110. Up to 100 address book entries can be registered. If there is - 2013 Toyota Sienna | Navigation Manual - Page 200
BASIC FUNCTIONS D To see information about the icon where the cursor is set POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed at the top of the screen. To display information about an icon, set the cursor on it. Touch "Info.". Information such as the name, - 2013 Toyota Sienna | Navigation Manual - Page 201
BASIC FUNCTIONS INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 92.) ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Touch "Info.". - 2013 Toyota Sienna | Navigation Manual - Page 202
BASIC FUNCTIONS DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Information such as the name, address, and phone number are displayed. If "Enter " is touched, the position of the cursor is set as a destination. If - 2013 Toyota Sienna | Navigation Manual - Page 203
BASIC FUNCTIONS - Switching the screens XMr NavTraffic TEXT INFORMATION When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Any one of the screen configurations can be selected . 1. Touch this button to display the following - 2013 Toyota Sienna | Navigation Manual - Page 204
cannot be selected. : To display the single map screen. (See page 40.) : To display the dual map screen. (See page 41.) : To display the compass mode screen. (See page 41.) : To display the freeway screen. (See page 78.) : To display the turn list screen. (See page 80.) : To display the arrow - 2013 Toyota Sienna | Navigation Manual - Page 205
mode screen. The screen shows the dual map. The map on the left is the main map. The right side map can be edited by touching any specific point on the right side , the guidance screen changes to the compass mode screen. This screen can perform the following procedures: 1. Changing the map scale 2. - 2013 Toyota Sienna | Navigation Manual - Page 206
D If the map or the current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to perform scrolling on the foot - 2013 Toyota Sienna | Navigation Manual - Page 207
display building information Information is available only for buildings for which information is recorded on the map disc. The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. Touch or . Touch "Info." while the foot - 2013 Toyota Sienna | Navigation Manual - Page 208
Industry Business facility Airport Military University Hospital Stadium Shopping mall Golf Speech command system- The speech command system enables you to operate the navigation system, audio system and hands−free system by giving a command. 1. Push the talk switch. After a beep sounds, the "Voice - 2013 Toyota Sienna | Navigation Manual - Page 209
to the previous screen. To cancel speech command recognition, say "Cancel", touch "Cancel", or push and hold the talk switch. If the navigation system does not respond or the confirmation screen does not disappear, please push the talk switch and try again. If a speech command cannot be recognized - 2013 Toyota Sienna | Navigation Manual - Page 210
a home address is not registered, the voice guidance system will say "Your home is not set" and "Enter" or say "Enter", and the system starts searching for a route to your home. Touch "Cancel" or say "Cancel", and the speech command system will be canceled. D Voice commands may not be recognized if - 2013 Toyota Sienna | Navigation Manual - Page 211
service is not available. (For details, see "XMr NavTraffic" page 98.) 1. Push the talk switch. INFORMATION In the following conditions, the system system to recognize. D There are some noises such as wind noise, etc. 2. Say "Command list". 3. Say the command of your choice to operate the system. - 2013 Toyota Sienna | Navigation Manual - Page 212
INFORMATION When the "Voice Menu" screen is displayed, all the commands in the voice recognition command list can be recognized. D Speech command example: Changing map screen 1. Push the talk switch. 2. Say "Command list". 3. Say "Dual map". To confirm commands on the screen, touch or to scroll - 2013 Toyota Sienna | Navigation Manual - Page 213
BASIC FUNCTIONS D Speech command example:Changing map scale 1. Push the talk switch. 2. Say "Command list". 3. Say "Zoom in" or "Zoom out". To confirm commands on the screen, moving. When or is touched, push the talk switch again and say the command. The scale of the map display is changed. 49 - 2013 Toyota Sienna | Navigation Manual - Page 214
BASIC FUNCTIONS 50 - 2013 Toyota Sienna | Navigation Manual - Page 215
DESTINATION SEARCH SECTION DESTINATION SEARCH D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Preset destinations ...Destination search by "Address" ...Destination search by "Point of Interest" ...Destination search by "Previous Destinations" - 2013 Toyota Sienna | Navigation Manual - Page 216
- Selecting the search area Change the selected region in order to set a destination from a different region by using "Address", "Point of Interest" or "Intersection & Freeway". Push the "DEST" button. 1. Touch "Search Area" to display a map of the United States and Canada divided into 12 regions - 2013 Toyota Sienna | Navigation Manual - Page 217
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in - 2013 Toyota Sienna | Navigation Manual - Page 218
home if "OK" is touched even while driving. 2. Touch any of the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the preset destination point and the route preference. (See "Starting route guidance" on page 72.) If a preset - 2013 Toyota Sienna | Navigation Manual - Page 219
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to search a destination by address. (a) Search by city (b) Search by street address 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Selecting a city to search 1. Push the "DEST" button. 2. Touch " - 2013 Toyota Sienna | Navigation Manual - Page 220
Input the street name and touch "OK". 8. Input a house number. 7. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If the same - 2013 Toyota Sienna | Navigation Manual - Page 221
5 Cities". 3. Touch "Street Address". 2. Touch the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See "(a) Selecting a city to search" on page 55.) 4. Touch - 2013 Toyota Sienna | Navigation Manual - Page 222
72.) If the same address exists in more than one city, the current screen changes inputting the city name or to the address list screen. 8. Touch the button INFORMATION You can search for a street name using just the body. Example : S WESTERN AVE You can input "S WESTERN AVE", "WESTERN AVE" or " - 2013 Toyota Sienna | Navigation Manual - Page 223
the button for the desired method. 4. Input the name of the Point of Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) When inputting the name - 2013 Toyota Sienna | Navigation Manual - Page 224
DESTINATION SEARCH D Selecting a city to search Touch the button of the desired destination. If the same name exists in more than one city, a search can be performed more easily with "City" and "Category". (See "D Selecting a city to search" on page 60 and "D Selecting from the categories" on page - 2013 Toyota Sienna | Navigation Manual - Page 225
DESTINATION SEARCH D Selecting from the categories (b) Search by "Category" The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "Point of Interest" on the "Destination" screen. 3. Touch "Category" on the "Point of Interest" screen. - 2013 Toyota Sienna | Navigation Manual - Page 226
DESTINATION SEARCH SETTING THE SEARCH POINT FROM NEAR HERE Touch "Near Here". The search point is set at the current position, and the "POI Category" screen will be displayed. (See page 64.) SETTING THE SEARCH POINT FROM ALONG MY ROUTE Touch "Along My Route". The search point is set and the "POI - 2013 Toyota Sienna | Navigation Manual - Page 227
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES 1. Touch "Near City Center". SETTING THE SEARCH POINT FROM NEAR A DESTINATION 1. Touch "Near a Destination". 2. Touch "Last 5 Cities". 2. Touch the button of the desired destination. The search point is set and the "POI Name" screen will be - 2013 Toyota Sienna | Navigation Manual - Page 228
screen, touch "List All Categories" to list all POI categories. 4. Input a telephone number. 5. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If there - 2013 Toyota Sienna | Navigation Manual - Page 229
the button of the desired destination. "Delete": To delete the previous destination. (To delete previous destinations, see page 119.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) INFORMATION The - 2013 Toyota Sienna | Navigation Manual - Page 230
of the screen. 3. Touch the button of the desired address book entry. "Options": To register or edit address book. (See page 108.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 3. Touch the desired - 2013 Toyota Sienna | Navigation Manual - Page 231
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2013 Toyota Sienna | Navigation Manual - Page 232
name of the second intersecting street. 4. Input the name of the first intersecting street which are located near the destination to be set. 5. the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route - 2013 Toyota Sienna | Navigation Manual - Page 233
" screen. 3. Touch "Freeway Entrance/Exit" on the "Intersection & Freeway" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected - 2013 Toyota Sienna | Navigation Manual - Page 234
button. 2. Touch "Map" on the second page of the "Destination" screen. 6. Either a freeway "Entrance" or "Exit" can be selected. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route - 2013 Toyota Sienna | Navigation Manual - Page 235
Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 3. Touch the destination - 2013 Toyota Sienna | Navigation Manual - Page 236
DESTINATION SEARCH Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION Set destinations can also - 2013 Toyota Sienna | Navigation Manual - Page 237
OK" is touched until a beep sounds, demo mode will start. Push the "MAP/VOICE" button to finish Demo mode. Current position 2 Destination point 3 Type of the desired route from 3 possible routes. (See page 74.) "Edit Route": To change the route. (See page 75.) 1 D The route for returning may not be - 2013 Toyota Sienna | Navigation Manual - Page 238
DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from 3 routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick", "Alt." or "Short" to select the desired route. "Quick": Recommended route. - 2013 Toyota Sienna | Navigation Manual - Page 239
you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. Touch "Edit Route". "Add": To add destinations are provided on the conditions which the system uses to determine the route to the destination. (See page 89.) 75 - 2013 Toyota Sienna | Navigation Manual - Page 240
DESTINATION SEARCH 76 - 2013 Toyota Sienna | Navigation Manual - Page 241
ROUTE GUIDANCE SECTION ROUTE GUIDANCE 3 D Route guidance screen ...78 D Typical voice guidance prompts ...81 D Distance and time to destination ...83 D Setting and deleting destinations ...84 Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Detour - 2013 Toyota Sienna | Navigation Manual - Page 242
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the - 2013 Toyota Sienna | Navigation Manual - Page 243
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2013 Toyota Sienna | Navigation Manual - Page 244
screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen - 2013 Toyota Sienna | Navigation Manual - Page 245
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.5 miles 4.7 miles 0.5 miles 1 2 1 2 3 4 "Proceed about 4 miles to the traffic circle." "In half of a mile - 2013 Toyota Sienna | Navigation Manual - Page 246
." "In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice - 2013 Toyota Sienna | Navigation Manual - Page 247
ROUTE GUIDANCE Distance and time to destination The distance, the estimated travel time and the estimated arrival time from the current position to the selected destination are displayed. Estimated travel time is displayed. Estimated arrival time is displayed. When the vehicle is on the guidance - 2013 Toyota Sienna | Navigation Manual - Page 248
the arrival order of the additional destination. 3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 84 - 2013 Toyota Sienna | Navigation Manual - Page 249
the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set - 2013 Toyota Sienna | Navigation Manual - Page 250
- Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where detour process. After detouring, the system returns to the original guidance route. "Whole Route": By touching this button, the system will calculate an entire new route to - 2013 Toyota Sienna | Navigation Manual - Page 251
ROUTE GUIDANCE - Route overview 1. Touch "Route". This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the - 2013 Toyota Sienna | Navigation Manual - Page 252
, not all 1. Touch "Route". road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the - 2013 Toyota Sienna | Navigation Manual - Page 253
. : To preview the route to the next destination. : To preview the route to the next destination in fast−forward mode. : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to the previous destination or starting point in fast−forward - 2013 Toyota Sienna | Navigation Manual - Page 254
of choices are provided on the conditions which the system uses to determine the route to the destination. The entire route from the starting point to the destination is displayed. "OK": To start guidance. "Edit Route": To change a route. (See page 75.) 1. Touch "Route". 2. Touch "Preferences" to - 2013 Toyota Sienna | Navigation Manual - Page 255
ROUTE GUIDANCE - Pausing and resuming guidance D Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. Touch "Route - 2013 Toyota Sienna | Navigation Manual - Page 256
POI icons D To resume guidance Points of Interest such as gas stations and restaurants can be displayed on the map screen. You to be displayed on the map screen have already been set, "Change POI" is displayed. The screen will change to the current position map with route guidance. A screen with - 2013 Toyota Sienna | Navigation Manual - Page 257
, touch this button. "Find Local POI": When searching for the nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 200 miles (320 km). (See page 94.) Select the desired POI categories. The selected category icon appears on the top - 2013 Toyota Sienna | Navigation Manual - Page 258
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 200 miles (320 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2013 Toyota Sienna | Navigation Manual - Page 259
as a straight line from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 72.) 95 - 2013 Toyota Sienna | Navigation Manual - Page 260
POI icons It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 miles (50 km). 1. Touch "Show on Map". 2. Touch "POI Icons". The "POI Icons - 2013 Toyota Sienna | Navigation Manual - Page 261
ROUTE GUIDANCE D To start recording the route trace D To stop recording the route trace 1. Touch "Show on Map". 1. Touch "Show on Map". 2. Touch "Route Trace". "Route Trace" indicator is highlighted. 2. Touch "Route Trace". The following screen will be displayed. Touching "Yes" stops - 2013 Toyota Sienna | Navigation Manual - Page 262
Satellite Radio has the responsibility for all fees and service, they are subject to change. The following operations can be performed. D Show XMr NavTraffic Information Traffic information is displayed on the map. (See page 99.) D Auto Avoid Traffic If any heavy congestion or moderate traffic has - 2013 Toyota Sienna | Navigation Manual - Page 263
ROUTE GUIDANCE D Show XMr NavTraffic information XMr NavTraffic information is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 99 - 2013 Toyota Sienna | Navigation Manual - Page 264
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2013 Toyota Sienna | Navigation Manual - Page 265
MY PLACES SECTION MY PLACES D Navigation settings ...Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 102 103 105 108 114 119 101 - 2013 Toyota Sienna | Navigation Manual - Page 266
MY PLACES Navigation settings - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 54, " - Destination search by Preset destinations" on page 54 and " - Destination search by "Address Book"" on - 2013 Toyota Sienna | Navigation Manual - Page 267
MY PLACES - Setting up the "Home" If home has been registered, that information can be recalled by using the "Go Home" touch screen button on the "Destination" screen. (See "- Destination search by Home" on page 54.) 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. (a) - 2013 Toyota Sienna | Navigation Manual - Page 268
" screen. 6. Touch "OK". To edit registered information, see "(b) Editing home" on page 104. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be displayed on the map. (See page 112.) "Location": To edit location information. (See page 113 - 2013 Toyota Sienna | Navigation Manual - Page 269
MY PLACES - Setting up the "Preset Destinations" (c) Deleting home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. If preset destination has been registered, that information can be recalled by using the "Preset Destination" - 2013 Toyota Sienna | Navigation Manual - Page 270
MY PLACES (a) Registering preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. When registration of preset destination is completed, the "Edit Preset Destination" screen will be displayed. 7. - 2013 Toyota Sienna | Navigation Manual - Page 271
." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names can be displayed on the map. (See page 112.) "Location": To edit location information - 2013 Toyota Sienna | Navigation Manual - Page 272
MY PLACES - Setting up the "Address Book" (c) Deleting preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. Points or areas on the map can be registered. 1. Push the "SETUP" button. 2. Touch "Navi - 2013 Toyota Sienna | Navigation Manual - Page 273
MY PLACES (a) Registering address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing address book entries" on page 110. INFORMATION 4. Touch " - 2013 Toyota Sienna | Navigation Manual - Page 274
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can be displayed on the map. (See page 112.) "Location": To edit location information - 2013 Toyota Sienna | Navigation Manual - Page 275
Touch "Edit" of "Icon". 2. Touch the desired sound icon. The next screen appears when "Bell (with Direction)" is touched. 2. Touch the desired icon. Change pages by touching "Page 1", "Page 2" or "With Sound" tab. Touch either or to adjust the direction. Touch "OK". The bell sounds only when - 2013 Toyota Sienna | Navigation Manual - Page 276
MY PLACES D To change "Name" DISPLAYING MEMORY POINT NAMES The name of an address book entry can be set to display on the map. 1. Touch "Edit" of "Name". To - 2013 Toyota Sienna | Navigation Manual - Page 277
MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch one of the 8 directional touch screen buttons to move the cursor to the - 2013 Toyota Sienna | Navigation Manual - Page 278
MY PLACES - Setting up the "Areas to Avoid" (c) Deleting address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. Areas you want to avoid because of traffic jams, construction work or other reasons can be - 2013 Toyota Sienna | Navigation Manual - Page 279
way as for a destination search, or display the map of the area to be avoided. (See "Destination search" on page 52.) 8. Touch either or to change the size of the area to be avoided. 9. Touch "OK". INFORMATION D If a destination is input in the area to avoid or the route calculation cannot - 2013 Toyota Sienna | Navigation Manual - Page 280
on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit the name of the area to avoid. The names can be or off the area to avoid feature. To turn on the feature touch "On" on the "Edit Area to Avoid" screen. To turn off the feature touch "Off" on the - 2013 Toyota Sienna | Navigation Manual - Page 281
MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be - 2013 Toyota Sienna | Navigation Manual - Page 282
to screen button to move the cursor the desired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 118 - 2013 Toyota Sienna | Navigation Manual - Page 283
"Delete". 5. Touch the button to be deleted. "Select All": To select all registered areas to avoid in the system. "Unselect All": To unselect all registered areas to avoid in the system. 6. Touch "Delete". 7. To delete the area, touch "Yes". To cancel the deletion, touch "No". 4. Touch the button - 2013 Toyota Sienna | Navigation Manual - Page 284
MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 120 - 2013 Toyota Sienna | Navigation Manual - Page 285
TELEPHONE AND INFORMATION SECTION TELEPHONE AND INFORMATION D Telephone (Hands−free system for cellular phone) ...Enter a Bluetoothr phone ...Call on the Bluetoothr phone ...Receive on the Bluetoothr phone ...Talk on the Bluetoothr phone ...D Calendar ... 5 122 126 132 139 139 143 121 - 2013 Toyota Sienna | Navigation Manual - Page 286
phone. This system supports Bluetoothr. Bluetoothr is a wireless data system by which you the following problems may occur. D The Bluetoothr connection may be cut. D Noise may be heard and the Bluetoothr antennas. The radio medical devices. Bluetooth is a registered trademark of Bluetooth SIG, Inc. - 2013 Toyota Sienna | Navigation Manual - Page 287
. Profile) D PBAP (Phone Book Access Profile) Ver.1.0 If your cellular phone does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota. com/bluetooth" to find approved Bluetoothr phones for this system. You can use the - 2013 Toyota Sienna | Navigation Manual - Page 288
D Driving on unpaved road. (Making a traffic noise.) D Driving at the high speed. D The window is open. D Turning the air−conditioning vents towards the left may not be displayed depending on the phone you have. This system doesn't have a charging function. 3 Indicates the receiving area. "Rm - 2013 Toyota Sienna | Navigation Manual - Page 289
area or in a place inaccessible by radio waves, "No Service" is displayed. An antenna for the Bluetoothr connection is built in the display. The indication of the Bluetoothr connection may turn yellow and the system may not function when you use the Bluetoothr phone in the following conditions - 2013 Toyota Sienna | Navigation Manual - Page 290
be installed and operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Co−location: This transmitter must not be co−located or operated in conjunction with any other antenna or transmitter. To use the hands−free system - 2013 Toyota Sienna | Navigation Manual - Page 291
same one. 4. When this screen is displayed, input the passcode displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2013 Toyota Sienna | Navigation Manual - Page 292
the connection result is displayed. This screen appears when the Bluetoothr phone is first connected after the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system- When the engine switch is in the "ACC" or "ON" position, a nearby cellular phone you have - 2013 Toyota Sienna | Navigation Manual - Page 293
take time, the phone connection is carried out during Bluetoothr audio play. MANUALLY When the auto connection has failed or "Handsfree power" is turned off, you have to connect Bluetoothr manually. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Connect Phone". 4. Touch "Handsfree - 2013 Toyota Sienna | Navigation Manual - Page 294
TELEPHONE AND INFORMATION When you connect the phone while Bluetoothr audio is playing 5. The "Connect Bluetooth*" screen is displayed. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. This screen is displayed, and the Bluetoothr audio will stop temporarily. 6. When the connection - 2013 Toyota Sienna | Navigation Manual - Page 295
- If the Bluetoothr phone is disconnected with poor reception from the Bluetoothr network; when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the Bluetoothr phone. In this case, the connection result is not displayed. Vehicles without smart - 2013 Toyota Sienna | Navigation Manual - Page 296
TELEPHONE AND INFORMATION - Call on the Bluetoothr phone After you enter the Bluetoothr phone, you can call by using hands−free system. You can call using the 6 methods described below. D By dial You can call by inputting the phone number. This cannot be operated while driving. 1. Push - 2013 Toyota Sienna | Navigation Manual - Page 297
TELEPHONE AND INFORMATION D By phonebook You can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in total of phonebooks. This cannot be operated while driving. 3. Select the - 2013 Toyota Sienna | Navigation Manual - Page 298
want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 134 - 2013 Toyota Sienna | Navigation Manual - Page 299
TELEPHONE AND INFORMATION D By call history You can call by call history which has 4 functions below. All: all the numbers above which were memorized Missed: calls which you missed Incoming: calls which you received Outgoing: numbers which you called You can call using the latest 5 call history - 2013 Toyota Sienna | Navigation Manual - Page 300
. D When a phone number registered in the phonebook is received, the name and the number are displayed. D Number−withheld calls are also memorized in the system. D A international phone call may not be made depending on the cellular phone which you have. You can call by giving a command. (For the - 2013 Toyota Sienna | Navigation Manual - Page 301
the talk switch. "After the beep, please say a command." "Such as "Go Home", "Destination", "Phone", "Audio" or "Command List"." "(beep)" You: "Phone." System: "Phone." "Say a command." "Such as "Dial by Number", "Dial by Name", "Redial", "Call Back" or "Connect Phone"." "(beep)" You: "Dial by Name - 2013 Toyota Sienna | Navigation Manual - Page 302
"Cancel". (Except for recognizing the command.) D By POI* call D Say "Cancel". You can call by touching when it is displayed on the screen from navigation system. (See "POI INFORMATION" on page 36 for details.) *: Point of Interest 138 - 2013 Toyota Sienna | Navigation Manual - Page 303
. To mute your voice: Touch "Mute". To input a Key: Touch "0−9". To transfer the call: Touch "Call Transfer". You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to Hands−free call, the Hands−free screen will be displayed and you can - 2013 Toyota Sienna | Navigation Manual - Page 304
(p or w) and the number following phone number. (ex. 056133w0123p#1:) You can do this operation when you want to operate an answering machine or use a telephone service in a bank for example. You can register the phone number and the code number in the phonebook. 140 - 2013 Toyota Sienna | Navigation Manual - Page 305
by giving a command during a call. The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see "Speech command system" on page 44.) When a connected call is interrupted by a third party, this screen is displayed. or push on the steering Touch wheel to - 2013 Toyota Sienna | Navigation Manual - Page 306
TELEPHONE AND INFORMATION Everytime you touch or push on the steering wheel during interrupted call, the other party will be switched. If your cellular phone is not approved for HFP Ver. 1.5, this function can not be used. INFORMATION Interrupt call operation may differ depending on your phone - 2013 Toyota Sienna | Navigation Manual - Page 307
AND INFORMATION Calendar To view calendar. 1. Push the "INFO/PHONE" button. 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month's is being displayed). 143 - 2013 Toyota Sienna | Navigation Manual - Page 308
TELEPHONE AND INFORMATION 144 - 2013 Toyota Sienna | Navigation Manual - Page 309
186 212 219 D Quick reference ...146 D Using your audio/video system ...147 Some basics ...Radio operation ...CD changer operation ...Bluetoothr audio operation ...DVD player operation ...USB memory/iPod operation ...D Audio/video remote controls ... D Audio/video system operating hints ...221 145 - 2013 Toyota Sienna | Navigation Manual - Page 310
the radio, CD changer, DVD player*, Bluetoothr audio player, AUX or USB memory/iPod side of this button to seek up or down for a station, or to access a desired track, file or chapter. For details, see pages 157, 170, 174, 184, 189, 192 and 215. *: Vehicles with rear seat entertainment system - 2013 Toyota Sienna | Navigation Manual - Page 311
the mode switches between FM1 and FM2. For details, see pages 149 and 155. 10 "DISC·AUX" button Push this button to turn the Bluetoothr audio player, AUX, USB memory/iPod, CD changer or DVD player* on. For details, see pages 149, 155, 169, 183 and 188. *: Vehicles with rear seat entertainment system - 2013 Toyota Sienna | Navigation Manual - Page 312
apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its - 2013 Toyota Sienna | Navigation Manual - Page 313
screen. See page 252 for details. Push the "DISC·AUX", "FM", "AM" or "SAT" button to turn on the desired mode. U6080GS Push the "AUDIO" button and touch the "AM", "FM", "SAT", "CD", "DVD*", "BT", "AUX" or "USB" tab to turn on the desired mode. *: Vehicles with rear seat entertainment system 149 - 2013 Toyota Sienna | Navigation Manual - Page 314
changer/DVD player* by ejecting all the discs. If the audio system was previously off, then the entire audio system will be turned off when you eject all the discs. If the other function was previously playing, it will come on again. *: Vehicles with rear seat entertainment system U6081GS U6080GS - 2013 Toyota Sienna | Navigation Manual - Page 315
, CD changer, DVD player*, Bluetoothr audio player, AUX and USB memory/ iPod, operation are displayed on the function touch−screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. *: Vehicles with rear seat entertainment system Touch the - 2013 Toyota Sienna | Navigation Manual - Page 316
the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the sound becomes difficult to hear due to road noise, wind noise or other noises while driving, select "On". The system adjusts to the optimum volume and tone - 2013 Toyota Sienna | Navigation Manual - Page 317
screen size (with rear seat entertainment system) 1. Push the "AUDIO" button and touch "DVD" tab. U6007GS 1. Touch Front" or "Rear": Adjusts sound balance between the front and rear speakers. "L" or "R": Adjusts sound balance between the left and right speakers. 3. Touch "OK". The tone of each mode - 2013 Toyota Sienna | Navigation Manual - Page 318
AUDIO/VIDEO SYSTEM U6009GS 4. Touch the desired button. "Normal": Displays a 3 : 4 screen, with either side in black. "Wide 1": Widens the 3 : 4 screen horizontally to fill the . D Never try to disassemble or oil any part of the changer. Do not insert anything other than a disc into the slot. 154 - 2013 Toyota Sienna | Navigation Manual - Page 319
AUDIO/VIDEO SYSTEM - Radio operation (h) Your DVD player (with rear seat entertainment system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button or touching the "DVD" tab on AUDIO screen. (i) AUX adapter The sound of portable audio players connected to - 2013 Toyota Sienna | Navigation Manual - Page 320
on the touch−screen button. Each radio mode (AM, FM1 or FM2) can store up to 6 stations. To change the preset station to a different one, reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to - 2013 Toyota Sienna | Navigation Manual - Page 321
on the screen. Seek tuning: Push the "SEEK/TRACK" button on either side. The radio will begin seeking up or down for a station of the , touch "SCAN" again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text messages from radio - 2013 Toyota Sienna | Navigation Manual - Page 322
AUDIO/VIDEO SYSTEM U6080GS "Type A "" Each time you touch "A Type " or "Type "", the program type changes as in the following: D ROCK D MISC (Miscellaneous a program is set, "Type Seek" appears. Touch the switch and the system starts to seek the station in the relevant program type. If any type - 2013 Toyota Sienna | Navigation Manual - Page 323
(e) Traffic announcement U6090GSF "Message" If the system receives a radio text from RDS station, "MSG" appears on the display. Touch "Message", and a text message is displayed on the screen. This function is available - 2013 Toyota Sienna | Navigation Manual - Page 324
price of the vehicle and optional digital satellite tuner. For complete information on subscription rates and terms, or to subscribe to the XMr Satellite Radio. U.S.A.- Visit on the web at www.xmradio.com or call 1−800−967−2346. Canada when activating XMr service or when reporting a problem. If you - 2013 Toyota Sienna | Navigation Manual - Page 325
AUDIO/VIDEO SYSTEM (c) Listening to satellite radio (d) Channel category U6082GS Touch either "A Type" or "Type "" to go to the next or previous category. Push the "SAT" button or - 2013 Toyota Sienna | Navigation Manual - Page 326
AUDIO/VIDEO SYSTEM (e) Presetting a channel 1. Tune in the desired channel. U6082GS 2. Touch one of appears on the touch− screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is - 2013 Toyota Sienna | Navigation Manual - Page 327
AUDIO/VIDEO SYSTEM (g) Displaying the title and name U6092GS When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "Text" again, the display returns. - 2013 Toyota Sienna | Navigation Manual - Page 328
SYSTEM (h) If the satellite radio tuner malfunctions When problems occur with the XMr tuner, a message will appear on the display. Referring to the table below to identify the problem, take the suggested corrective action. The XMr antenna is not connected. Check whether the XMr antenna change change - 2013 Toyota Sienna | Navigation Manual - Page 329
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions : -Reorient or relocate the receiving antenna. -Increase the separation between the equipment This XMr tuner supports "Audio Services" (Music and - 2013 Toyota Sienna | Navigation Manual - Page 330
STOP" switch must be in ACCESSORY or IGNITION ON mode. Vehicles without smart key system- The engine switch must be in the "ACC" or "ON" position. Your CD changer can store up to 4 discs. You can set a disc at the lowest empty disc number. 3. The amber indicators at either side of the slot start - 2013 Toyota Sienna | Navigation Manual - Page 331
Do not obstruct the display while it is moving. It could damage your audio/video system. D Do not insert one disc stacked on top of another one or feed them The display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected, the amber indicators change to - 2013 Toyota Sienna | Navigation Manual - Page 332
the amber indicators change to green. A disc can be inserted. 1. Push the "LOAD· / CLOSE" button. The "Load·Eject" screen appears. U6018GS The numbers of the trays where the disc is not set are dimmed. U6020GS 2. Touch "Eject All". The display opens and the amber indicators at either side of the - 2013 Toyota Sienna | Navigation Manual - Page 333
track of the following disc starts. When play of the final disc ends, play of the first disc starts again. The changer will skip any empty disc trays. Vehicles with rear seat entertainment system - If the DVD player is turned on, push the "DISC·AUX" button again or touch "CD" tab to switch to the - 2013 Toyota Sienna | Navigation Manual - Page 334
AUDIO/VIDEO SYSTEM (e) Playing an audio disc U6093GS Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an audio disc number to display this screen. SELECTING A DESIRED TRACK "SEEK/TRACK" button: Use for direct access to a desired track. Push either side of the - 2013 Toyota Sienna | Navigation Manual - Page 335
AUDIO/VIDEO SYSTEM U6093GS Touch the desired track number. The changer will start playing the scroll to the end of the name. Touch A to scroll the beginning of the name. Fast forward: Push "Ɯ" side of the "SEEK/TRACK" button and hold it to fast forward the disc. When you release the button, the - 2013 Toyota Sienna | Navigation Manual - Page 336
briefly while the disc is playing. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel a second while the disc is playing. "D.RAND" appears on the screen. The system selects a track on all the audio discs in the changer in random order. - 2013 Toyota Sienna | Navigation Manual - Page 337
SYSTEM (f) Playing a MP3/WMA disc SELECTING A DESIRED FOLDER U6095GS Push the "AUDIO" button and touch the "CD" tab, then touch the "Change . U6026GS Touch the desired folder number. The changer will start playing the first file of the selected folder. : By touching this touch−screen button, - 2013 Toyota Sienna | Navigation Manual - Page 338
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/ release the button, the changer will resume playing. "TUNE·FILE" knob: Use for direct access to a desired file in the disc. Turn the "TUNE·FILE" knob to step up - 2013 Toyota Sienna | Navigation Manual - Page 339
AUDIO/VIDEO SYSTEM U6095GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". - 2013 Toyota Sienna | Navigation Manual - Page 340
AUDIO/VIDEO SYSTEM U6096GS SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on the screen. The changer will play - 2013 Toyota Sienna | Navigation Manual - Page 341
listening to. Playing the files in one folder in random order - Touch "RAND" briefly while the disc is playing. "RAND" appears on the screen. The system selects a file in the folder you are currently listening to. To cancel it, touch "RAND" once again. Playing the files in all the folders on - 2013 Toyota Sienna | Navigation Manual - Page 342
, only MP3/WMA files are played. The Bluetoothr audio system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication. U6086GS This audio system supports Bluetoothr, a wireless data system capable of playing portable audio music without cables. If - 2013 Toyota Sienna | Navigation Manual - Page 343
Ver.1.3 or higher) Please go to "http://www.toyota. com/bluetooth" to find approved Bluetoothr phones for this system. CAUTION D Do not operate the player's controls or connect to the Bluetoothr audio system while driving. D An antenna for the Bluetoothr connection is built in the instrument panel - 2013 Toyota Sienna | Navigation Manual - Page 344
display. The indication of the Bluetoothr connection may turn yellow and the system may not function when you use the Bluetoothr portable player in the following conditions. D Your portable player is hiding behind from the display (behind the seat or in the glove box or console box). D Your portable - 2013 Toyota Sienna | Navigation Manual - Page 345
the portable player, see the instruction manual that comes with it. D When the connection method is "From Vehicle". D When the auto connection is on Vehicles with smart key system- When the portable player is standby for the connection, it will be automatically connected whenever the "ENGINE START - 2013 Toyota Sienna | Navigation Manual - Page 346
D When the connection method is "From Portable Player" Operate the portable player and connect it to the Bluetoothr audio system. For the operation procedure for the portable player, see the instruction manual that comes with it. Touch "Connect". U6033GS Touch "Connect". When the connection - 2013 Toyota Sienna | Navigation Manual - Page 347
the Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the portable player. In this case, the connection result is not displayed. Vehicles without smart key system- If the portable player is disconnected with poor reception - 2013 Toyota Sienna | Navigation Manual - Page 348
AUDIO/VIDEO SYSTEM D Selecting a desired track Some titles may not be displayed depending on the type of portable player. "SEEK/TRACK" button: Use for direct access to a desired track. Push either side of the "SEEK/TRACK" button and repeat it until the desired track number appears on the screen. - 2013 Toyota Sienna | Navigation Manual - Page 349
AUDIO/VIDEO SYSTEM D Selecting a desired album D Other function U6086GS "Album Y": Touch this button to "RPT" briefly. "RPT" appears on the screen. When the track is finished, the player will automatically play it again. To cancel the repeat, touch "RPT" once again. INFORMATION Depending on the - 2013 Toyota Sienna | Navigation Manual - Page 350
disc only when a disc is loaded in the DVD player. A WMA and DVD audio disc cannot be played. For details of "Rear seat entertainment system", refer to "Owner's Manual". For appropriate discs for this player, see "Audio/video system operating hints" on page 221. (a) Inserting the disc INFORMATION - 2013 Toyota Sienna | Navigation Manual - Page 351
AUDIO/VIDEO SYSTEM (b) Ejecting a disc U6013SNI U6014SNI The indicator light turns on while the disc is appropriate discs for this player, see "Audio/video system operating hints" on page 221. Push the " " button. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert - 2013 Toyota Sienna | Navigation Manual - Page 352
. Push the "DISC·AUX" button or push the "AUDIO" button to display audio screen and touch the "DVD" tab if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC·AUX" button again or touch "DVD" tab to switch to the DVD player.) 188 - 2013 Toyota Sienna | Navigation Manual - Page 353
AUDIO/VIDEO SYSTEM U6041GS Touch the desired track number. The player will start playing the selected track from the beginning. SELECTING A DESIRED TRACK "SEEK/TRACK" button: Use for direct access to a desired track. Push either side of the "SEEK/TRACK" button and repeat it until the desired track - 2013 Toyota Sienna | Navigation Manual - Page 354
AUDIO/VIDEO SYSTEM U6103GS SEARCHING FOR A DESIRED TRACK Touch "SCAN" on the screen. "SCAN" will be highlighted on the screen. The player will play the next track for 10 seconds, then scan again. To select a track, touch "SCAN" on the screen a second time. If the player reaches the end of the disc, - 2013 Toyota Sienna | Navigation Manual - Page 355
AUDIO/VIDEO SYSTEM (e) Operating a MP3 DISC U6105GS PLAYING A MP3 DISC Push the "AUDIO" button and touch the "DVD" tab to display this screen. SELECTING A DESIRED FOLDER U6045GS Touch the desired folder number. The player will start playing the first file of the selected folder. : By touching - 2013 Toyota Sienna | Navigation Manual - Page 356
AUDIO/VIDEO SYSTEM U6105GS SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until the desired file number appears on the display. As you release the button, the player will start playing the selected - 2013 Toyota Sienna | Navigation Manual - Page 357
AUDIO/VIDEO SYSTEM U6046GS Touch the desired file number. The player will start playing the selected file from FOR A DESIRED FILE Touch "SCAN" on the screen briefly. "SCAN" appears on the screen. The DVD player will play the next file in the folder for 10 seconds, then scan again. To select a file, - 2013 Toyota Sienna | Navigation Manual - Page 358
AUDIO/VIDEO SYSTEM U6107GS SEARCHING FOR A DESIRED FOLDER Touch and hold "SCAN" on the screen until the beep sounds. "FLD.SCAN" appears on the screen. The DVD player will play the file at the beginning of each folder for 10 seconds, then scan again. To select a file, touch "SCAN" on the screen a - 2013 Toyota Sienna | Navigation Manual - Page 359
. The system selects a instruction manual for the DVD video disc separately provided. For the detailed information about DVD video discs, see "(i) DVD player and DVD video disc information" on page 210. Precautions on DVD video disc When recording with a DVD first track or file starts. D If a DVD - 2013 Toyota Sienna | Navigation Manual - Page 360
impact on the human body or pose a driving hazard. Keep this in mind when you adjust the volume. U6077GS Vehicles with smart key system- This screen appears when the video screen is first displayed after "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key - 2013 Toyota Sienna | Navigation Manual - Page 361
AUDIO/VIDEO SYSTEM U6084GS PLAYING A DVD DISC Push the "AUDIO" button and touch the "DVD" tab to display this screen. Touch "Settings" on "DVD" screen and touch "Wide" on "Settings" screen. The screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the - 2013 Toyota Sienna | Navigation Manual - Page 362
from there. "Audio": The audio changing screen appears. (See page 201.) "Subtitle": The subtitle changing screen appears. (See page 200.) "Angle": The angle selection screen appears. (See page 201.) "Wide": The screen mode screen appears. (See page 153.) U6084GS DISPLAYING DVD CONTROLS If you touch - 2013 Toyota Sienna | Navigation Manual - Page 363
SYSTEM DESCRIPTION OF DVD CONTROLS "Menu" and "Top Menu": If you touch any of the above controls, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD player starts playing video for that menu item. (For details, see the manual that comes with the DVD - 2013 Toyota Sienna | Navigation Manual - Page 364
and touch "OK". The player starts playing video for that title number. When you push either side of the "SEEK/ TRACK" button, you can select a chapter. If you enter the wrong numbers, touch to delete the numbers. When you touch screen returns. , the previous CHANGING THE SUBTITLE LANGUAGE Each time - 2013 Toyota Sienna | Navigation Manual - Page 365
AUDIO/VIDEO SYSTEM U6069GSb CHANGING THE AUDIO LANGUAGE Each time you touch "Change", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous U6076GS CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible - 2013 Toyota Sienna | Navigation Manual - Page 366
AUDIO/VIDEO SYSTEM D Audio language You can change the audio language. 1. Touch "Audio Language". 2. " screen, . touch the D DVD language You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to read on the "DVD Language" screen. If you cannot - 2013 Toyota Sienna | Navigation Manual - Page 367
SYSTEM or off alternately. D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4−digit personal code on the the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the language you want to hear - 2013 Toyota Sienna | Navigation Manual - Page 368
AUDIO/VIDEO SYSTEM 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 0209 0214 0215 0218 0301 0315 0319 0325 0401 0426 0515 0520 0521 0601 0609 - 2013 Toyota Sienna | Navigation Manual - Page 369
AUDIO/VIDEO SYSTEM 1315 1318 1319 1320 1325 1401 1405 1415 1503 1513 1518 1601 1612 1619 1721 1813 1814 1815 1823 1901 1904 1907 1908 1909 1911 - 2013 Toyota Sienna | Navigation Manual - Page 370
from the front seat. To lock the operation of the player from the rear seat, see "D Rear system lock" on page 254. U6110GS PLAYING A VIDEO CD Push the "AUDIO" button and touch the "DVD" tab to display this screen. When you touch "Wide" on "Settings" screen, the screen mode can be changed. If you - 2013 Toyota Sienna | Navigation Manual - Page 371
AUDIO/VIDEO SYSTEM U6062GS DISPLAYING VIDEO CD SETTINGS If you touch "Settings" on "DVD" screen, "Settings" screen appears. touch this while the player is playing video, the next track is searched and played. "Main/Sub": A multiplex transmission changing control. The mode changes from Main/Sub to - 2013 Toyota Sienna | Navigation Manual - Page 372
AUDIO/VIDEO SYSTEM DISPLAYING VIDEO CD CONTROLS If you touch the part where controls are not located while you are watching video on the video CD, video CD - 2013 Toyota Sienna | Navigation Manual - Page 373
" will also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 221. If "Region code error" appears on the display: It indicates that the DVD region code is not set properly. If "DVD error" appears on the display: It indicates that the inside - 2013 Toyota Sienna | Navigation Manual - Page 374
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating a country where - 2013 Toyota Sienna | Navigation Manual - Page 375
angles. Multi−language feature: You can select a language of the subtitle and audio. Region codes: The region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you cannot play the disc on the DVD player. For region codes - 2013 Toyota Sienna | Navigation Manual - Page 376
SYSTEM - USB memory/iPod operation Connecting a USB memory or iPod enables you to enjoy music from the vehicle speakers. (b) Playing a USB memory or iPod D Playing and pausing a file or track CAUTION Do not operate the player and the music will start playing Open the cover and connect a USB - 2013 Toyota Sienna | Navigation Manual - Page 377
play from the same point in which it was last used. D When the USB memory is connected and the audio source is changed to USB memory mode, the USB memory will start playing the first file in the first folder. If the same device is removed and reinserted (and the contents have not been - 2013 Toyota Sienna | Navigation Manual - Page 378
AUDIO/VIDEO SYSTEM D Selecting a desired folder (USB memory only) : By touching this moving. Touch "Select". The folder list is displayed. Touch the desired folder number. The player will start playing the first file of the selected folder. : By touching this touch−screen button, the list moves - 2013 Toyota Sienna | Navigation Manual - Page 379
playing from that position. Reverse: Push and hold the " " side of the "SEEK/ TRACK" button to reverse the player. When you release the button, the player will resume playing. "TUNE/FILE" knob: Use for direct access to a desired file or track in the player. Turn the "TUNE/FILE" knob to step up or - 2013 Toyota Sienna | Navigation Manual - Page 380
AUDIO/VIDEO SYSTEM U6078GS " USB memory Touch the desired file or track number. The changer will start playing the selected file or track from the beginning. : By touching - 2013 Toyota Sienna | Navigation Manual - Page 381
AUDIO/VIDEO SYSTEM D Searching for a desired file (USB memory only) D Searching for a desired folder (USB memory only) U6111GS Touch "SCAN" on the screen briefly while the music is playing. "SCAN" appears on the screen. The player will play the next file for 10 seconds, then scan again. To select - 2013 Toyota Sienna | Navigation Manual - Page 382
"RPT" appears on the screen. When the file or track is finished, the player will automatically play it again. To cancel the repeat, select "RPT" once again playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a file or track you are currently listening to. To cancel this - 2013 Toyota Sienna | Navigation Manual - Page 383
the " " side of the switch once, quickly. To select a desired disc: Push and hold the " " or " " switch until you hear a beep to change to the next or controls, and features are described below. 1 Volume control switch 2 " " switch 3 "MODE" switch 1 Volume control switch Push "+" side to increase - 2013 Toyota Sienna | Navigation Manual - Page 384
SYSTEM Vehicles with rear seat entertainment system - DVD player While the DVD player is in operation, the chapter or track can be changed by pushing the " " or " " switch. Bluetoothr audio player file: Quickly push and release the " " or " " side of the switch until the track or file you want to - 2013 Toyota Sienna | Navigation Manual - Page 385
two signals to reach your antenna at the same time. If DVD player. INFORMATION The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem - 2013 Toyota Sienna | Navigation Manual - Page 386
interior before you use the changer and player. D Bumpy roads or other vibrations may make your CD changer and DVD player skip. D If moisture gets into your CD changer and DVD player with this system. iPod 4th generation and earlier models are not compatible with this system. iPhone, iPod - 2013 Toyota Sienna | Navigation Manual - Page 387
SYSTEM Audio CDs XS18016 DVD video discs CD changer D Use only discs marked as shown above. The following products may not be playable on your changer. Copy−protected CD CD−ROM Video CDs DVD player D Use only discs marked as shown above. The following products may not be playable on your player - 2013 Toyota Sienna | Navigation Manual - Page 388
quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to - 2013 Toyota Sienna | Navigation Manual - Page 389
fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their - 2013 Toyota Sienna | Navigation Manual - Page 390
system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise and playback errors, use the appropriate file extensions. D The player can play only the first - 2013 Toyota Sienna | Navigation Manual - Page 391
with no more than two levels of folders. 001.mp3 002.mp3 6U5161aX Folder 3 006.mp3 MP3 player (rear seat entertainment system) Folder 1 003.mp3 Folder 2 004.mp3 005.mp3 001.mp3 002.wma 6U5161aX Folder 3 006.mp3 MP3/WMA player (front audio system) Folder 1 003.mp3 Folder 2 004.mp3 005.wma 227 - 2013 Toyota Sienna | Navigation Manual - Page 392
player (rear seat entertainment system)-It is possible to play up to 253 folders on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D USB memory-It is possible to play up to 999 folders or 255 files per folder. D The order changes - 2013 Toyota Sienna | Navigation Manual - Page 393
AUDIO/VIDEO SYSTEM TERMS Packet write- This is a general term that describes the process of writing data on−demand to CD−R, etc., in the same way that data - 2013 Toyota Sienna | Navigation Manual - Page 394
AUDIO/VIDEO SYSTEM 230 - 2013 Toyota Sienna | Navigation Manual - Page 395
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM 7 D Rear view monitor system ...232 231 - 2013 Toyota Sienna | Navigation Manual - Page 396
and all around the vehicle visually and with mirrors before proceeding. Do not use the system when the backdoor is not completely closed. In the evening, or in other situations with no light sources, the sides may not be visible in wide mode. Use your own eyes to confirm the vehicle's surroundings - 2013 Toyota Sienna | Navigation Manual - Page 397
REAR VIEW MONITOR SYSTEM D Do not use the system in the following cases: D On icy or slick road D The regular mode image looks rougher than a wide mode. NOTICE D If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and - 2013 Toyota Sienna | Navigation Manual - Page 398
REAR VIEW MONITOR SYSTEM D Area displayed on screen Image is displayed approximately level on screen. On screen On screen Corners of bumper Corners of bumper " Wide mode The area detected by the camera is limited. The camera does not detect objects close to either corner of the bumper or under - 2013 Toyota Sienna | Navigation Manual - Page 399
REAR VIEW MONITOR SYSTEM D The rear view monitor system camera Area displayed on the screen may vary according to vehicle status or road conditions. 235 - 2013 Toyota Sienna | Navigation Manual - Page 400
MONITOR SYSTEM The rear view monitor system camera is located on the back door as shown in the illustration. The camera uses a special lens. The perceived distance from images that appear on the screen differs from the actual distance. When the camera is used under fluorescent lights, sodium lights - 2013 Toyota Sienna | Navigation Manual - Page 401
before maneuvering into it. (a) To activate the rear view monitor system CAUTION Depending on the circumstances of the vehicle (number of passengers, amount of luggage, etc.), the position of the guide lines displayed on the screen may change. Be sure to check visually behind and all around the - 2013 Toyota Sienna | Navigation Manual - Page 402
or regular mode Regular mode and wide mode are switched when the wide/regular mode selection switch is touched. The current mode is indicated by the yellow indicator. (c) The modes of the rear view monitor system The rear view monitor system has the following three modes. Use each mode according to - 2013 Toyota Sienna | Navigation Manual - Page 403
REAR VIEW MONITOR SYSTEM D Estimated course line display 1 2 3 4 Wide/regular mode select switch Touching this button changes between regular mode and wide mode. (See page 238.) Vehicle width extension guide lines These lines indicate the estimated vehicle width extension. When the steering - 2013 Toyota Sienna | Navigation Manual - Page 404
REAR VIEW MONITOR SYSTEM D Guide line display mode D Course line deletion mode Wide/regular mode select switch Touching this button changes between regular mode and wide mode. (See page 238.) 2 Vehicle width extension guide lines These lines indicate the estimated vehicle width extension. 3 - 2013 Toyota Sienna | Navigation Manual - Page 405
REAR VIEW MONITOR SYSTEM - Driving precautions In any of the following situations, there is a margin of error between the guide lines on the screen and the actual distance/course on the road. D When the grade behind the vehicle slopes up sharply, objects appear to be - 2013 Toyota Sienna | Navigation Manual - Page 406
REAR VIEW MONITOR SYSTEM D When any part of the vehicle sags due to the number of passengers or the distribution of the load, there is a margin of error between the guide lines on the screen and the actual distance/course on the road. D When the grade behind the vehicle slopes down sharply, - 2013 Toyota Sienna | Navigation Manual - Page 407
REAR VIEW MONITOR SYSTEM The width to point B , you will hit the truck. Estimated course line display mode-The estimated course lines are displayed according to flat surfaces (such as the be on the lines. In reality if you back up as guided by the lines, the vehicle may hit the truck. Similarly, - 2013 Toyota Sienna | Navigation Manual - Page 408
MONITOR SYSTEM - Estimated course line display mode D Example of how to use the system when parking (perpendicular parking) 1. Put the shift lever in the "R" position. If any other display mode is selected, switch to estimated course line display mode. 2. While referring to the screen and mirrors - 2013 Toyota Sienna | Navigation Manual - Page 409
REAR VIEW MONITOR SYSTEM 3. Turn the steering wheel so that the estimated course lines are within the parking space, and back up carefully. 4. When the steering wheel in order to equalize the left and right intervals between the vehicle width extension lines and the parking space side lines. 245 - 2013 Toyota Sienna | Navigation Manual - Page 410
REAR VIEW MONITOR SYSTEM - Guide line display mode D Example of how to use the system when parking (perpendicular parking) 5. When the vehicle width extension lines and the parking space side lines are parallel, straighten the steering wheel (straight backward position) and then carefully back up - 2013 Toyota Sienna | Navigation Manual - Page 411
REAR VIEW MONITOR SYSTEM 3. Back up until the parking assist guidelines meet the left edge of When the vehicle is in the parking space, turn the steering wheel so that the vehicle width extension guide lines and the clearance to the left and right of the parking space are about the same near the - 2013 Toyota Sienna | Navigation Manual - Page 412
REAR VIEW MONITOR SYSTEM 5. Turn the steering wheel so that the vehicle width extension guide lines are parallel with the parking space lines. When the lines are parallel, straighten the steering wheel and back up slowly. Even if the distance guide line and the parking space rear edge appear to be - 2013 Toyota Sienna | Navigation Manual - Page 413
REAR VIEW MONITOR SYSTEM - If the message "System initializing" will be displayed If the message "System initializing" will be right. (It does not matter in which direction - right or left - you turn first.) When the screen returns to the original display, correction is complete. If the above - 2013 Toyota Sienna | Navigation Manual - Page 414
REAR VIEW MONITOR SYSTEM 250 - 2013 Toyota Sienna | Navigation Manual - Page 415
the on/off settings of operation sounds and automatic screen change.) D Clock settings ...257 (Used for changing time zones and the on/off settings of daylight saving time portable audio devices and Bluetoothr audio devices players.) D Vehicle settings ...316 (Vehicle information can be set.) 251 - 2013 Toyota Sienna | Navigation Manual - Page 416
lock* can be set to "On" or "Off". (See "D Rear system lock" on page 254.) * : Vehicles with rear seat entertainment system "On" or "Off" can be selected to sound beeps. "On" or "Off" can be selected for automatic screen changes from the audio screen to the map. When "On" is selected, the screen - 2013 Toyota Sienna | Navigation Manual - Page 417
SETUP No. 5 Function Line color can be changed. (See "D Selecting the line color" on page 254.) Keyboard layout can be changed. (See "D Selecting a keyboard layout" on page 255.) Distance unit can be changed. (See "D Unit of measurement" on page 255.) The personal data can be deleted. (See "D - 2013 Toyota Sienna | Navigation Manual - Page 418
or "Off" and then touch "Save". "On": The rear passengers cannot operate the rear seat entertainment system. Only front passengers can operate the system. "Off": Both the front and rear passengers can operate the rear seat entertainment system. The line color will be changed. 5. Touch "Save". 254 - 2013 Toyota Sienna | Navigation Manual - Page 419
"SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the "General Settings" screen. "General - 2013 Toyota Sienna | Navigation Manual - Page 420
SETUP LAYOUT TYPE D Delete personal data The following personal data can be deleted or returned to their default settings: D Maintenance conditions D Maintenance information "off" setting D Address book D Areas to avoid D Previous points D Route trace D Phonebook data D Call history data D Speed - 2013 Toyota Sienna | Navigation Manual - Page 421
SETUP Clock settings 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the Used for changing time zones and the on/ off settings of daylight saving time. "General Settings" screen. 1. Push the "SETUP" button. 3. Touch "Delete Personal Data". 2. - 2013 Toyota Sienna | Navigation Manual - Page 422
"SETUP" button. 2. Touch "Clock" on the "Setup" screen. On this screen, the following functions can be performed. No. 1 2 Function Time zone can be changed. (See "D Time zone" on page 258.) "On" or "Off" can be selected for daylight savings time. 3. Touch "Time Zone". 4. Touch the desired time - 2013 Toyota Sienna | Navigation Manual - Page 423
during route guidance can be set to "On" or "Off". Voice guidance during audio system use can be set to "On" or "Off". Voice recognition talkback can be set "On" or "Off". When "On" is selected, the speech command system can be operated without pressing the talk switch more than once. When using the - 2013 Toyota Sienna | Navigation Manual - Page 424
can receive congestion information through voice guidance while being guided to your destination. To turn the "Traffic Voice is not needed, touch "Off" to disable the feature. When selected the number or "Off" will be Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and - 2013 Toyota Sienna | Navigation Manual - Page 425
SETUP Navigation settings Points or areas on the map can be registered. Detailed navigation settings Average cruising speed, displayed screen contents, and POI icon categories can be set. On this screen, the following operations can be performed. No. 1 2 3 4 5 6 Function Sets home (See page 103 - 2013 Toyota Sienna | Navigation Manual - Page 426
SETUP SCREENS FOR NAVIGATION SETTINGS 4. Touch the items to be set. 5. Touch "Save". On this screen, the following functions can be performed. No. 1 Function Average cruising speed can be set. (See "D Driving speeds" on page 263.) The automatic input function can be set to "On" or "Off". During - 2013 Toyota Sienna | Navigation Manual - Page 427
function ("AAOff" function)" on page 267.) The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See "D Current position/ tire change calibration" on page 267.) Display of pop−up information can be set to "On - 2013 Toyota Sienna | Navigation Manual - Page 428
and construction work. D It is possible to display up to 99 hours 59 minutes. D Auto avoid traffic The guidance route automatically changes to another route to avoid heavy congestion. To turn the "Auto Avoid Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch - 2013 Toyota Sienna | Navigation Manual - Page 429
When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free ". 5. Touch "Save". INFORMATION When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing Traffic" will not operate. - 2013 Toyota Sienna | Navigation Manual - Page 430
SETUP D POI category change (Select POI icons) Select from among the 6 icons displayed on the "Customize POI Icons" screen, so that setting Navi. Settings" screen. 4. Touch "Customize POI Icons". 7. Touch the desired category. 8. Touch "OK". 5. Touch the category button to be changed. 266 - 2013 Toyota Sienna | Navigation Manual - Page 431
to display page 2 of the D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also accuracy of a current vehicle position, see "Limitations of the navigation system" on page 324. 267 - 2013 Toyota Sienna | Navigation Manual - Page 432
SETUP POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either the or to ad- just the direction of the - 2013 Toyota Sienna | Navigation Manual - Page 433
Settings" screen. Then touch to display page 2 of the "Detailed Navi. Settings" screen. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map will be - 2013 Toyota Sienna | Navigation Manual - Page 434
up Information" is turned off, the following messages will not be displayed. "Telephone settings" can be changed on the "Phone settings" screen. This message appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 1. Push the "SETUP" button. The message appears when - 2013 Toyota Sienna | Navigation Manual - Page 435
Touch "OK". D Ring volume setting 1. Touch "Ring Volume". 2. Change each setting according to the following procedures. 3. When you complete all settings , touch "Save". Automatic volume settings for high speed The system will automatically increase the volume by one step up when the speed - 2013 Toyota Sienna | Navigation Manual - Page 436
SETUP - Manage phone D Initializing the settings You can initialize the settings. 1. Touch "Default". "Manage phone" is accessed from the "Connect Phone" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 2. Touch "Yes". 3. Touch "Manage Phone". Please refer to the following pages for each - 2013 Toyota Sienna | Navigation Manual - Page 437
1. Touch "(add new)" to register your cellular phone to the system. 3. When the connection is completed, this screen is displayed. displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". - 2013 Toyota Sienna | Navigation Manual - Page 438
SETUP When another Bluetoothr device is connected You can also register a new Bluetoothr phone in the following way. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Manage Phone". When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it - 2013 Toyota Sienna | Navigation Manual - Page 439
4 numbers. "(add new)" is displayed when you have not registered a Bluetoothr phone yet. Although you can register up to 4 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 1. Select the phone to connect. The Bluetoothr mark is displayed when you connect the phone - 2013 Toyota Sienna | Navigation Manual - Page 440
SETUP When you connect the phone while Bluetoothr audio is playing 2. The "Connect Bluetooth*" screen is displayed. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. This screen is displayed, and the Bluetoothr audio will stop temporarily. When another Bluetoothr device is connected - 2013 Toyota Sienna | Navigation Manual - Page 441
phone which is displayed on the screen. You can change it into a desired name. If you change a device name, the name registered in your cellular phone is not changed. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr phones with - 2013 Toyota Sienna | Navigation Manual - Page 442
SETUP 3. Select the phone to edit. 5. Use the software keyboard to input the device name. 4. This screen is displayed. If you want to change the device name, touch "Edit". 6. Confirm the device name and touch "OK". 278 - 2013 Toyota Sienna | Navigation Manual - Page 443
SETUP D Deleting a Bluetoothr phone 1. Touch "Options". 3. Select the desired phone or touch "Select All", then touch "Delete". You can select multiple phones and delete them at the same time. 2. Touch "Remove Phones". 4. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the - 2013 Toyota Sienna | Navigation Manual - Page 444
is connecting, you can not read the registered data. "Phonebook" is accessed from the "Phonebook Settings" screen. 1. Push the "SETUP" button. other voice recognition. (For the operation of voice recognition, see "Speech command system" on page 44.) When you select the command of "Add New Phone", - 2013 Toyota Sienna | Navigation Manual - Page 445
SETUP - Setting the phonebook "Setting the phonebook" is accessed from the "Contacts" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". You can also display the "Contacts" screen in the following way. 1. Push the " - 2013 Toyota Sienna | Navigation Manual - Page 446
. Transfer it while the engine is running. 3. Transfer the phonebook data to the system using the Bluetoothr phone. system. When you have touched "Replace Contacts": If your cellular phone does not support PBAP or OPP service, you can not use this function. If your phone supports PBAP service - 2013 Toyota Sienna | Navigation Manual - Page 447
SETUP When another Bluetoothr device is connected 4. In case that you have touched "Add Contacts", this screen is displayed. If you want to transfer another phonebook, touch "Yes". When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it, touch - 2013 Toyota Sienna | Navigation Manual - Page 448
SETUP D Registering the phonebook data You can register the phonebook data. Up to 3 numbers per person can be registered. 1. Touch "New Contact". 3. Input the phone number and touch "OK". If you want to use the tone signal after the phone number, input the tone signal too. 2. Use the software - 2013 Toyota Sienna | Navigation Manual - Page 449
SETUP D Editing the phonebook data You can register the phone number in "Phone#1", "Phone#2" and "Phone#3" separately. 5. When two or less numbers in total are registered to this contact, this screen is displayed. When you want to add a number to this contact, touch "Yes". 1. Touch "Edit Contacts - 2013 Toyota Sienna | Navigation Manual - Page 450
SETUP You can also display the "Edit Contact" screen in the following ways. From "Contact Data" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Edit" for the desired name or number. 4. Edit the name or the number. ( - 2013 Toyota Sienna | Navigation Manual - Page 451
from the list. D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 1. Touch "Delete Contacts". 5. Touch "Add Contact" or "Update Contact". 6. In case that you have touched "Update Contact", this screen is displayed. Select the - 2013 Toyota Sienna | Navigation Manual - Page 452
SETUP You can also delete it in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Yes". 5. Touch "Options". 6. Touch "Delete Contact". 288 - 2013 Toyota Sienna | Navigation Manual - Page 453
SETUP - Speed dials setting "Speed dials setting" is accessed from the "Speed Dials" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". 7. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will - 2013 Toyota Sienna | Navigation Manual - Page 454
SETUP You can also display the "Speed Dials" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". D Registering the speed dial You can register the desired phone number from phonebook. Up to 18 numbers per phone can be registered. 1. Touch "New - 2013 Toyota Sienna | Navigation Manual - Page 455
SETUP 3. Touch the desired phone number. 5. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to replace it. 4. Touch the touch−screen button you want to register in. 6. When this screen is displayed, the operation is complete. 291 - 2013 Toyota Sienna | Navigation Manual - Page 456
SETUP You can also register the speed dial in the following ways. From "Speed Dial" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". 6. Select the data you want to register. 4. Touch "(add new)". 7. Touch the desired phone number. 5. Touch "Yes" to set new speed - 2013 Toyota Sienna | Navigation Manual - Page 457
SETUP From "Contact Data" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 5. Touch "Options". - 2013 Toyota Sienna | Navigation Manual - Page 458
SETUP D Editing the speed dial You can edit the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Edit Speed Dials". 5. Touch "Save". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 294 - 2013 Toyota Sienna | Navigation Manual - Page 459
SETUP D Deleting the speed dial You can delete the speed dial. 3. Touch "Yes". 1. Touch "Delete Speed Dials". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 295 - 2013 Toyota Sienna | Navigation Manual - Page 460
SETUP - Deleting call history You can delete the call history. 1. Touch "Delete Call History". 3. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 2. Select the desired history to delete. 4. Touch "Yes". 296 - 2013 Toyota Sienna | Navigation Manual - Page 461
SETUP - Setting the voice tag You can also delete the call history in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Call History". "Setting the voice tag" is done by displaying "Voice Tags" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". - 2013 Toyota Sienna | Navigation Manual - Page 462
SETUP You can also display "Voice Tags" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". D Registering the voice tag You can register a voice tag for up to 20 numbers. 1. Touch "New Voice Tag". 4. Touch "Options". 2. Select the data you want to - 2013 Toyota Sienna | Navigation Manual - Page 463
Play" to play the voice tag. When you complete the voice tag registration, touch "OK". INFORMATION When you use the voice tag, do not change the language setting from the language setting used when registering. If they are different, the voice recognition can't recognize the voice tag that you have - 2013 Toyota Sienna | Navigation Manual - Page 464
SETUP D Editing the voice tag 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 1. Touch "Edit Voice Tags". 2. Select the data you want to edit. 3. This screen is displayed. The following operations are the same as - 2013 Toyota Sienna | Navigation Manual - Page 465
- Bluetoothr D Deleting the voice tag You can confirm and change the Bluetoothr settings. 1. Push the "SETUP" button. 2. Touch "Phone". 1. Touch "Delete Voice Tags". 3. Touch "Bluetooth*". *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 2. Select the desired data or touch "Select - 2013 Toyota Sienna | Navigation Manual - Page 466
following procedures. Changing the handsfree power The "Handsfree Power" display shows the following state. When "Handsfree Power" is "On": Vehicles with smart key system- The Bluetoothr phone is automatically connected when you turn the ignition to ACCESSORY or IGNITION ON mode. Vehicles without - 2013 Toyota Sienna | Navigation Manual - Page 467
SETUP 1. Touch "Handsfree Power". 3. Touch "Save". In case that "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 2. Touch "On" or "Off". This screen is - 2013 Toyota Sienna | Navigation Manual - Page 468
software keyboard to input the device name. 2. Input a passcode and touch "OK". INFORMATION The device names are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the phone, the device name of the audio will - 2013 Toyota Sienna | Navigation Manual - Page 469
a phone Bluetoothr audio is playing while 1. Touch "Default". This screen is displayed, and the Bluetoothr audio will stop temporarily. 2. Touch "Yes". If "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. 305 - 2013 Toyota Sienna | Navigation Manual - Page 470
Push the "SETUP" button. 2. Touch "Phone". D Incoming call display You can select the method of the incoming call display. 3. Touch "Details". 1. Touch Mode". 4. Do each setting according to the following procedures. 5. When you complete each setting, touch "Save". "Incoming Call Display 306 - 2013 Toyota Sienna | Navigation Manual - Page 471
it on the screen. "Drop Down" mode ...The message is displayed on the upper side of the screen. You can only operate the steering switch. Vehicles with smart key system- When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the - 2013 Toyota Sienna | Navigation Manual - Page 472
SETUP D Initializing the settings You can initialize the settings. 1. Touch "Display Phone Status". 1. Touch "Default". 2. Touch "On" or "Off". 2. Touch "Yes". 308 - 2013 Toyota Sienna | Navigation Manual - Page 473
when you choose the portable player. 1. Push the "SETUP" button. U10003GS U10025GS 2. Touch "Audio" on "Setup" screen. 4. Select desired portable player and then touch "OK". Although you can register up to two portable players in the system, only one portable player can function at a time. 309 - 2013 Toyota Sienna | Navigation Manual - Page 474
You can see or change the information of the portable player on the system. "Device Name" ...The name of Bluetoothr portable player which is displayed on the screen. You can change it into a desired name. "Device Address" ...The address peculiar to the system. You cannot change it. If you have - 2013 Toyota Sienna | Navigation Manual - Page 475
" of "Bluetooth∗ Audio" on "BT Audio Settings" screen. ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. INFORMATION If the connection method is set to "From Portable Player", "Auto Bluetooth∗ Connect" cannot be selected. ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc - 2013 Toyota Sienna | Navigation Manual - Page 476
into the portable player. For the operation of the portable player, see the manual that comes with it first or a connection failure may occur when registering the Bluetoothr audio. U10011GS 4. When the connection is complete, this screen is displayed. You do not need to enter the portable player - 2013 Toyota Sienna | Navigation Manual - Page 477
(a) Removing a Bluetoothr audio U9006TI 1. Touch "Remove" of "Bluetooth∗ Audio" on "BT Audio Settings" screen. U10016GS If the selected portable player is in use, this screen will appear. Touch "Yes". The system will disconnect the portable player and remove it. U10014GS 2. Select the portable - 2013 Toyota Sienna | Navigation Manual - Page 478
connection method is set to "From Portable Player". ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. Vehicles with smart key system- When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the selected portable player will be automatically connected and the connection - 2013 Toyota Sienna | Navigation Manual - Page 479
the passcode The passcode for registering your portable player on the system can be changed. You can change this to a 4 to 8 digit number of your choice. The default is "0000". (d) Changing the device name You can change a device name. Even if you change a device name, the name registered in your - 2013 Toyota Sienna | Navigation Manual - Page 480
SETUP Vehicle Settings - - Maintenance (e) Initializing the Bluetoothr audio settings You can initialize the settings. When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components. (See page 27.) U9010TI 1. Touch "Default" on " - 2013 Toyota Sienna | Navigation Manual - Page 481
" (b) Dealer setting" on page 319.) "Reminder": When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen. (See page 27.) When the vehicle needs to be serviced, the touch screen button color will change to orange. 317 - 2013 Toyota Sienna | Navigation Manual - Page 482
": Replace engine coolant "Brake oil": Replace brake fluid "Trans. fluid": Replace transmission fluid "Service": Scheduled Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system - 2013 Toyota Sienna | Navigation Manual - Page 483
a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "SETUP" button. 2. Touch "Vehicle" on the "Setup" screen. 3. Touch "Maintenance" on the "Vehicle Settings" screen. 6. Touch "Edit" for the item you want to change. "Dealer": To enter - 2013 Toyota Sienna | Navigation Manual - Page 484
SETUP D To edit "Dealer" or "Contact" D To edit "Location" 1. Touch "Edit" of "Dealer" or "Contact". 1. Touch "Edit" of "Location". 2. Enter the name using the alphanumeric keys. Up to 32 characters can be entered. 3. Touch "OK". The previous screen will be displayed. 2. Touch the 8 - 2013 Toyota Sienna | Navigation Manual - Page 485
SETUP D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Phone #". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 321 - 2013 Toyota Sienna | Navigation Manual - Page 486
SETUP 322 - 2013 Toyota Sienna | Navigation Manual - Page 487
APPENDIX SECTION APPENDIX 9 D Limitations of the navigation system ...324 D Map database information and updates ...326 Changing the map DVD−ROM ...335 323 - 2013 Toyota Sienna | Navigation Manual - Page 488
case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna - 2013 Toyota Sienna | Navigation Manual - Page 489
calibration correctly. D After repeating a change of direction by going forward and backward, or turning on a turntable in the parking lot. D When leaving a covered parking lot or parking garage. D When a roof carrier is installed. D When driving with tire chains installed. D When the tires are worn - 2013 Toyota Sienna | Navigation Manual - Page 490
- After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 269.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or smaller than the originally equipped - 2013 Toyota Sienna | Navigation Manual - Page 491
DATABASE, nor reproduce, copy, duplicate, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which it was created, provided that you do not retain any copy - 2013 Toyota Sienna | Navigation Manual - Page 492
may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. The lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; - 2013 Toyota Sienna | Navigation Manual - Page 493
from any statute, law, regulation, or code, including any Sunshine Act, Public Records Act, Freedom of Information Act, or equivalent, which permits public access and/or reproduction or use of the Licensed Products. In the event that such exemption is challenged under any such laws, this Agreement - 2013 Toyota Sienna | Navigation Manual - Page 494
, non−commercial purposes, and not for service bureau, time−sharing or other similar purposes . You may not decompile, disassemble or reverse engineer any portion of this information, and may not this information with any products, systems, or applications installed or otherwise connected to or - 2013 Toyota Sienna | Navigation Manual - Page 495
holds a non−exclusive license from the United States Postal ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2010. Prices are not established, controlled or approved by the United States Postal ServiceR. The following trademarks and registrations are owned by the USPS - 2013 Toyota Sienna | Navigation Manual - Page 496
system for the solely personal, non−commercial purposes for which you were licensed, and not for service modify, decompile, disassemble or reverse engineer any portion of this Data, and any products, systems, or applications installed or otherwise passage of time, changing circumstances, sources used - 2013 Toyota Sienna | Navigation Manual - Page 497
State of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all disputes, claims - 2013 Toyota Sienna | Navigation Manual - Page 498
−site investigations. However, the names of roads, streets, facilities, and their locations frequently change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally - 2013 Toyota Sienna | Navigation Manual - Page 499
APPENDIX - Changing the map DVD−ROM 1. Push the "INFO/PHONE" button. 4. Insert a new map DVD−ROM with the label side up. 2. Touch "Map Data". 5. Push the "LOAD· / CLOSE" button to close the display. 3. Touch " DVD". 335 - 2013 Toyota Sienna | Navigation Manual - Page 500
anything on the opened display, as not obstruct the display while it is moving. It could damage your navigation system. D If a disc cannot be ejected, do not forcibly take out the release it. At this time, the audio disc and the map DVD− ROM will be ejected. 2. Touch "Map Data". INFORMATION Under - 2013 Toyota Sienna | Navigation Manual - Page 501
any interference, including interference that may cause undesired operation of the device. This Category II radiocommunication device complies with Industry Canada Standard RSS−310. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes: (1) il ne doit pas produire de - 2013 Toyota Sienna | Navigation Manual - Page 502
APPENDIX 338 - 2013 Toyota Sienna | Navigation Manual - Page 503
to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense - 2013 Toyota Sienna | Navigation Manual - Page 504
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 324 through 325. 2 - 2013 Toyota Sienna | Navigation Manual - Page 505
passengers. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual - 2013 Toyota Sienna | Navigation Manual - Page 506
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2013 Toyota Sienna | Navigation Manual - Page 507
Quick guide - - Overview buttons and guidance screen No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button "INFO/PHONE" button "DISP" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2013 Toyota Sienna | Navigation Manual - Page 508
to display the "Setup" screen. Touch this button to change the screen mode. Displays the distance, the estimated travel time to the Screen configuration button Distance and time to destination XMr NavTraffic mark "GPS" mark (Global Positioning System) 42 42 22, 102, 252, 257, 259, 261, 270, 309, - 2013 Toyota Sienna | Navigation Manual - Page 509
- Registering home 1 Push the "DEST" button. 2 Touch "Go Home". If home has not been registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 52. 7 - 2013 Toyota Sienna | Navigation Manual - Page 510
. 6 Touch "OK". Registration of home is complete. You can also register home by touching the "SETUP" button. (See " (a) Registering home" on page 103.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 104.) 8 - 2013 Toyota Sienna | Navigation Manual - Page 511
- Registering preset destinations 1 Push the "DEST" button. U0002SNI 2 Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset destinations. See - 2013 Toyota Sienna | Navigation Manual - Page 512
is complete. You can also register preset destinations by touching the "SETUP" button. (See " (a) Registering preset destinations" on page 106.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 107.) The registered points can be used on the - 2013 Toyota Sienna | Navigation Manual - Page 513
- Operation flow: guiding the route 1 Push the "DEST" button. 2 There are 10 different methods to search destinations. See "Destination search" on page 52. 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one - 2013 Toyota Sienna | Navigation Manual - Page 514
be used if your home has been registered. (To register "Home", see " (a) Registering home" on page 103.) 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route - 2013 Toyota Sienna | Navigation Manual - Page 515
one of the many Points of Interest that have already been stored in the system's database...59 3 "Previous Destinations" A destination can be selected from any of " One of the four categories of emergency service points that are already stored in the system's database can be selected...66 5 13 - 2013 Toyota Sienna | Navigation Manual - Page 516
"Intersection & Freeway" The names of two intersecting streets or a freeway (interstate) entrance or exit can be entered. This is helpful if only the general vicinity, not the specific address, is known...67 9 "Map" A destination can be selected simply by touching the location on the displayed map - 2013 Toyota Sienna | Navigation Manual - Page 517
the "Setup" screen, push the "SETUP" button. "General" Settings are available for language selection, operation sounds, automatic screen change, etc...252 "Clock" Used for changing settings for time zones, daylight saving time, etc...257 3 "Voice" Voice guidance can be set...259 4 "Navi." Settings - 2013 Toyota Sienna | Navigation Manual - Page 518
Quick reference ("Information" screen) This screen can be used to display the calendar and information on operation of the hands−free phone, etc. To display the "Information" screen, push the "INFO/PHONE" button. 1 "Phone" To view hands free phone information...126 2 "Map Data" Displays information - 2013 Toyota Sienna | Navigation Manual - Page 519
17