2003 Volvo S80 Owner's Manual - Page 82

2003 Volvo S80 Manual

Get 2003 Volvo S80 PDF manuals and user guides View all 2003 Volvo S80 manuals

Page 82 highlights

DOT 4+ boiling point > 536°F (280° C) P/N 9437433 Volume: 0.6 US qt (0.6 liter) Climate control system - refrigerant (R 134a) Oil: PAG Volume: 2.2 lbs (1000 g) R134a. Fuel Minimum octane requirement - AKI 87 (RON 91) Volume (fuel tank): 21.1 US gals (80 liters) Washer fluid reservoir Volume: 6 cyl: 4.7 US qts. (4.5 liters) All specifications are subject to change without prior notice. pg. 132 Fuel system, Distributor ignition system, Suspension Fuel system The engine is equipped with a multiport fuel injection system. Distributor ignition system Firing order: 1-5-3-6-2-4 Distributor ignition setting: Not adjustable Spark plugs: B 6294 T: P/N 271367-4 (or equivalent) B 6294 S: P/N 272371-8 (or equivalent) Spark plug gap: 0.028-0.032" (0.7-0.8 mm) Tightening torque: 18.4 ft. lbs. (25 Nm) WARNING! The distributor ignition system operates at very high voltages. Special safety precautions must be followed to prevent injury. Always turn the ignition off when: Replacing distributor ignition components e.g. plugs, coil, etc. Do not touch any part of the distributor ignition system while the engine is running. This may result in unintended movements and body injury. Front suspension Spring strut suspension with integrated shock absorbers and control arms linked to the support frame. Power-assisted rack and pinion steering. Safety type steering column. The alignment specifications apply to an unladen car but include fuel, coolant and spare wheel. Toe-in measured on the wheel rims: 2.3 mm +/ 0.8 mm Toe-in measured on tire sides: 2.8 +/ 0.9 mm Rear suspension Individual rear wheel suspension with longitudinal support arms, double link arms and track rods.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
DOT 4+ boiling point > 536°F (280° C) P/N 9437433
Volume:
0.6 US qt (0.6 liter)
Climate control system - refrigerant (R 134a)
Oil: PAG
Volume:
2.2 lbs (1000 g) R134a.
Fuel
Minimum octane requirement - AKI 87 (RON 91)
Volume (fuel tank):
21.1 US gals (80 liters)
Washer fluid reservoir
Volume:
6 cyl: 4.7 US qts. (4.5 liters)
All specifications are subject to change without prior notice.
pg. 132 Fuel system, Distributor ignition system, Suspension
Fuel system
The engine is equipped with a multiport fuel injection system.
Distributor ignition system
Firing order:
1-5-3-6-2-4
Distributor ignition setting: Not adjustable
Spark plugs:
B 6294 T: P/N 271367-4 (or equivalent)
B 6294 S: P/N 272371-8 (or equivalent)
Spark plug gap:
0.028-0.032" (0.7-0.8 mm)
Tightening torque:
18.4 ft. lbs. (25 Nm)
WARNING!
The distributor ignition system operates at very high voltages. Special safety precautions must be followed to
prevent injury. Always turn the ignition off when:
Replacing distributor ignition components e.g. plugs, coil, etc.
Do not touch any part of the distributor ignition system while the engine is running. This may result in unintended
movements and body injury.
Front suspension
Spring strut suspension with integrated shock absorbers and control arms linked to the support frame. Power-assisted
rack and pinion steering. Safety type steering column.
The alignment specifications apply to an unladen car but include fuel, coolant and spare wheel.
Toe-in measured on the wheel rims: 2.3 mm +/ 0.8 mm
Toe-in measured on tire sides: 2.8 +/ 0.9 mm
Rear suspension
Individual rear wheel suspension with longitudinal support arms, double link arms and track rods.