2005 Volvo S80 Owner's Manual - Page 27
2005 Volvo S80 Manual
Page 27 highlights
that the heating function is engaged. See page 39 for additional information on this function. CAUTION: Never use ice scrapers made of metal as they can easily scratch the mirror surface. pg. 49 Electronic Climate Control (ECC) - manual settings Recirculation (see also page 51) Press this switch to engage the recirculation function (air in the passenger compartment recirculates - no fresh air enters the compartment). The LED in the switch will light up to indicate that the function is engaged. Use this function if the outside air is contaminated with exhaust gases, smoke, etc or to heat/cool the car quickly. Recirculation should not be used for more than 15 minutes. If your windows begin to fog or mist, make sure that the recirculation function is switched off. Selecting Defroster automatically switches recirculation off. Timer mode activation: (Cars with Interior Air Quality system have no timer mode) Press and hold the recirculation button for at least 3 seconds to activate a recirculation timer mode. The amber LED in the recirculation button will flash 5 times to show that the timer mode is being activated. In the time mode, each time the recirculation button is pressed, the climate control system will recirculate the air in the passenger compartment for 5 to 12 minutes, depending on the outside air and then revert back to fresh air. Timer mode deactivation: Press and hold the recirculation button for at least 3 seconds. The amber LED in the recirculation button will illuminate steadily for 5 seconds to show a return to "normal" mode. In normal mode, when the recirculation button is pressed, the climate control system will recirculate the air in the passenger compartment until the recirculation button is pressed again. Timer mode memory: If the car is turned off while timer mode is active, timer mode will still be active when the car is restarted. Heated front seats (option) Please see page 39 for more information on this function. Air flow Press AUTO to automatically regulate air flow or press any combination of the controls shown in the illustration to manually adjust air flow. An LED in the switch will light up if an air flow control has been pressed. Air conditioning ON/OFF